Αυτοενισχυόμενο monitor μαγνητικά θωρακισμένο με DCW (Directivity Control Waveguide). Συμπαγής καμπίνα χυτού αλουμινίου MDE (Minimum Diffraction Enclosure) με Woofer 4″ και tweeter 3/4″. Διαθέτει (Bi-Amp) δύο ενισχυτές 50W ξεχωριστούς για το woofer και το tweeter. Το νέο 8020D προσδίδει 4dBu παραπάνω SPL από τα προηγούμενα της ίδιας σειράς Αναλογική είσοδος Balanced XLR. Freq. Response 56Hz – 25kHz (-6dB). 100dB Max. SPL. Διακόπτης On/Off και ρυθμιστικά “Room Response Control” και έντασης. Περιλαμβάνει επιτραπέζια βάση (Iso-Pod). Χρώμα Μαύρο ματ. Βάρος 3,2kg.
Styled in what the manufacturer has dubbed a “Producer Finish”, and utilizing Class-B amplification, the Genelec 8020D Active Two-Way 4″ Studio Monitor provides accurate reproduction of the source material in a compact form factor. Its MDE die-cast aluminum rounded shape minimizes frequency and reflection distortions caused by edge diffraction. The 19mm metal dome tweeter is surrounded by Genelec’s Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it in standby mode when no signal is present, reducing its energy consumption to less than 0.5W. The 8020D features a 50W high-frequency amplifier for its ¾” tweeter, and a 50W low-frequency amplifier for its 4″ woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
Attached Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications, and multimedia entertainment systems
Rear-facing treble-tilt, bass roll-off, and desktop cut controls enable you to optimize the speaker to its environment
Threaded holes for wall or ceiling brackets
Active crossover filter
Driver unit protection circuitry
Woofer and tweeter magnetically shielded
Monitor Type
Active 2-Way
Enclosure
Bass-Reflex, Shielded
Drivers
HF Driver: 1 x 0.75″ / 1.91 cm Metal Dome Tweeter
LF Driver: 1 x 4″ / 10.2 cm Cone
Amplification
1 x HF Amplifier: Rated at 50 W 1 x LF Amplifier: Rated at 50 W
Performance
Frequency Response
62 Hz to 20 kHz ± 2.5 dB
Maximum Sound Pressure Level (SPL)
107 dB
Total Harmonic Distortion (THD)
0.05%
THD+N
< 0.05%
Maximum Input Level
+24 dBu
Analog Input Sensitivity/Gain
+36 to -6 dBu (Continuously Variable)
Self-Generated Noise
Less Than 5 dBA (at 3′ / 1 m)
Protections and Limiting
Driver Protection
Signal Processing
EQ
1 x LF Shelf: -4 to 0 dB at 65 Hz 1 x Low-Mid Notch/Peak: -4 to 0 dB at 200 Hz 1 x HF Tilt: -2 to 0 dB at 15 kHz
Crossover
Crossover Frequency
3 kHz
Connectivity
Audio I/O
1 x XLR Female Analog Input (10 Kilohms)
Power
AC Input Power
100 to 240 VAC, 50/60 Hz
Power Consumption
0.5 W (Standby)
3 W (Idle)
60 W (Maximum)
General
Dimensions (W x H x D)
6 x 9.5 x 5.6″ / 151 x 242 x 142 mm
Weight
7.0 lb / 3.2 kg
Βάρος
4.00 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “GENELEC 8020D Ενεργό Ηχείο Μόνιτορ 2WAY BI-AMP 4″ ACTIVE NEARFIELD MONITOR” Ακύρωση απάντησης
Αυτοενισχυόμενο monitor μαγνητικά θωρακισμένο με DCW (Directivity Control Waveguide). Συμπαγής καμπίνα χυτού αλουμινίου MDE (Minimum Diffraction Enclosure) με Woofer 4" και tweeter 3/4". Διαθέτει (Bi-Amp) δύο ενισχυτές 50W ξεχωριστούς για το woofer και το tweeter. Το νέο 8020D προσδίδει 4dBu παραπάνω SPL από τα προηγούμενα της ίδιας σειράς Αναλογική είσοδος Balanced XLR. Freq. Response 56Hz - 25kHz (-6dB). 100dB Max. SPL. Διακόπτης On/Off και ρυθμιστικά "Room Response Control" και έντασης. Περιλαμβάνει επιτραπέζια βάση (Iso-Pod). Χρώμα Μαύρο ματ. Βάρος 3,2kg.
Styled in what the manufacturer has dubbed a "Producer Finish", and utilizing Class-B amplification, the Genelec 8020D Active Two-Way 4" Studio Monitor provides accurate reproduction of the source material in a compact form factor. Its MDE die-cast aluminum rounded shape minimizes frequency and reflection distortions caused by edge diffraction. The 19mm metal dome tweeter is surrounded by Genelec's Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.
The 8020D is built with Intelligent Signal Sensing (ISS) technology, which automatically activates the speaker when an audio signal is detected and puts it in standby mode when no signal is present, reducing its energy consumption to less than 0.5W. The 8020D features a 50W high-frequency amplifier for its ¾" tweeter, and a 50W low-frequency amplifier for its 4" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.
Attached Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications, and multimedia entertainment systems
Rear-facing treble-tilt, bass roll-off, and desktop cut controls enable you to optimize the speaker to its environment
Threaded holes for wall or ceiling brackets
Active crossover filter
Driver unit protection circuitry
Woofer and tweeter magnetically shielded
Monitor Type
Active 2-Way
Enclosure
Bass-Reflex, Shielded
Drivers
HF Driver: 1 x 0.75" / 1.91 cm Metal Dome Tweeter
LF Driver: 1 x 4" / 10.2 cm Cone
Amplification
1 x HF Amplifier: Rated at 50 W
1 x LF Amplifier: Rated at 50 W
Performance
Frequency Response
62 Hz to 20 kHz ± 2.5 dB
Maximum Sound Pressure Level (SPL)
107 dB
Total Harmonic Distortion (THD)
0.05%
THD+N
< 0.05%
Maximum Input Level
+24 dBu
Analog Input Sensitivity/Gain
+36 to -6 dBu (Continuously Variable)
Self-Generated Noise
Less Than 5 dBA (at 3' / 1 m)
Protections and Limiting
Driver Protection
Signal Processing
EQ
1 x LF Shelf: -4 to 0 dB at 65 Hz
1 x Low-Mid Notch/Peak: -4 to 0 dB at 200 Hz
1 x HF Tilt: -2 to 0 dB at 15 kHz
Crossover
Crossover Frequency
3 kHz
Connectivity
Audio I/O
1 x XLR Female Analog Input (10 Kilohms)
Power
AC Input Power
100 to 240 VAC, 50/60 Hz
Power Consumption
0.5 W (Standby)
3 W (Idle)
60 W (Maximum)
General
Dimensions (W x H x D)
6 x 9.5 x 5.6" / 151 x 242 x 142 mm
Weight
7.0 lb / 3.2 kg
Αυτοενισχυόμενο monitor DSP μαγνητικά θωρακισμένο με DCW (Directivity Control Waveguide). Συμπαγής καμπίνα χυτού αλουμινίου MDE (Minimum Diffraction Enclosure) με Woofer 5" και tweeter 3/4“. Διαθέτει (Bi-Amp) δύο ενισχυτές 40W ξεχωριστούς για το woofer και το tweeter. Συνδυασμένη ψηφιακή (AES/EBU) και αναλογική είσοδος Ballanced XLR. Διακόπτης On/Off και ρυθμιστικά "Room Response Control" και έντασης. Περιλαμβάνει επιτραπέζια βάση (Iso-Pod) και βάση επίτοιχη. Χρώμα Μαύρο ματ. Βάρος 5,6kg.
Behringer MS-20 24-Bit/192 kHz Digital 20-Watt Stereo Near Field Monitors
OVERVIEW
The MS20 Studio Monitors from Behringer are a pair of extremely compact, 2 x 10-Watt nearfield monitors that feature high-resolution 24-bit/192 kHz D/A converters. With the MS20, you can connect directly to your digital signal sources and eliminate annoying analog line-loss and hum forever. Whether you connect to your computer sound card, keyboard, or MP3 player, you will enjoy exceptional sound quality with great dynamics. The built-in amplifiers provide lots of headroom, while the powerful woofers and tweeters provide ultra-linear frequency response.
The MS20 connectivity includes stereo 1/8" and RCA jacks, which can be used simultaneously or mixed with a digital stereo source. Digital duties are handled by either RCA or TOSLINK sockets, providing for ultra-simple hookup. Individual volume controls for both Line inputs plus Bass and Treble EQ controls are provided on the front panel, along with a 1/4" headphone jack that automatically mutes the internal speakers.
Sound Quality
Sporting 3.625" woofers and 2.5" high-resolution tweeters, MS20 monitor speakers bring quality audio within the reach of anyone that operates a computer workstation. Whether you're a musician tracking your latest masterpieces, or just someone who listens to your favorite songs at work, MS20 loudspeakers will make them sound significantly better. They also make excellent add-on speakers for electronic keyboards. Front-mounted volume and individual bass and treble controls make accurate sound adjustments a breeze.
Built-in Mixer
The MS20 takes audio to an even higher level with its multiple input options. The built-in mixer features 1/8" stereo inputs for connecting CD/MD/MP3 players, dual RCA jacks for tape decks and stereo keyboard modules, and even both RCA and TOSLINK connectors for digital signal sources. This adds up to a system that lets you play along with a variety of prerecorded tracks. And you can wail away to your heart's content in total privacy, thanks to MS20's powerful headphone jack.
FEATURES
2-Way active studio monitor pair
Ideally suited for computer studios, multimedia workstations and keyboards
Built-in 2 x 10-Watt powerful amplifiers with lots of headroom
Powerful woofers and high-resolution tweeters
High-resolution 24-bit/192 kHz D/A converters for extended dynamic range
Optical and coaxial inputs to directly connect digital audio sources by S/PDIF interface
Two stereo analog inputs featuring 1/4'' TRS and stereo RCA connectors
Individual volume controls for both Line inputs plus Bass and Treble EQ controls
1/4'' TRS headphone connector with auto-mute loudspeaker function easily accessible on the front panel
SPECIFICATIONS
MS20 Digital Monitor Speakers (Pair)
Loudspeakers
Tweeter: ˜ 65 mm (2 1/2“), 8 ?
Woofer: ˜ 92 mm (3 5/8“), 4 ?
Audio Inputs
Line 1: 1/8" TRS stereo, impedance 20 k?
Line 2: 2 RCA, impedance 20 k?
Digital Inputs
Optical: TOSLINK
Coaxial: RCA
Converter: 24-bit
Sample rate:
System Specs
Output power: 2 x 20W
Frequency response: 50Hz to 25kHz
Power Supply
Mains Voltages: USA/Canada 120 V, 60 Hz
Power Consumption: 80W
MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.
The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
Woofer
Number
1
Basket Ø
9" (228 mm)
Voice coil Ø
2" (50 mm)
Cone material
HexaCone
Midrange
Number
1
Basket Ø
4.5" (116 mm)
Voice coil Ø
1" (25 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Midrange
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Panel
Front
Frequency response
32 Hz - 50 kHz
THD > 80 Hz
≤0.6 %
Long term output
≥114 dB
Max. peak
≥124 dB
Crossover frequencies
350 / 2800 Hz
Input impedance
10 KOhm
Weight
34 lb (15,4 kg)
Magnetically shielded
Optional
Height x Width x Depth
19" (485 mm) x 11" (281 mm) x 11.5" (295 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.