Content |
Το TC 1 είναι ένα από τα κορυφαία προϊόντα μας. Είναι ένα πυκνωτικό λυχνίας μικρόφωνο με μεγάλη κάψα και θερμό ήχο για πολύ χαμηλό κόστος. Παίρνετε ένα κλασικό μικρόφωνο λυχνίας με high-pass φίλτρο, pad και εννέα διαφορετικά πολικά διαγράμματα για λιγότερα χρήματα από όσο μερικοί ξοδεύουν σε ένα ζευγάρι τζιν.
Το TC 1 είναι ένα πολύ ευπροσάρμοστο μικρόφωνο με ευρεία απόκριση συχνότητας και μεγάλη δυναμική περιοχή. Θα λειτουργήσει εξαιρετικά στο στούντιο ή για ζωντανό ήχο και εφαρμογές μετάδοσης. Ο ηχητικός χαρακτήρας είναι παρόμοιος στα παλαιάς εποχής μικρόφωνα και ακούγεται εκπληκτικά με τα περισσότερα όργανα και φωνές.
Χρησιμοποιήστε το για φωνητικά και χορωδίες, ακουστικές και ηλεκτρικές κιθάρες και άλλα όργανα, ως drum overhead ή μικρόφωνο δωματίου και σε οποιαδήποτε άλλη εφαρμογή όπου θα χρησιμοποιούσατε ένα παλαιάς εποχής πυκνωτικό μικρόφωνο λυχνίας.
|
Πυκνωτικό μικρόφωνο μεγάλου διαφράγματος, καρδιοειδές, γενικής χρήσης. Διαθέτει φίλτρο αποκοπής χαμηλών συχνοτήτων & preattenuation pad (-20 dB).
Live sound Podcasting Home recording Vocals Musical instruments
|
Perception 120
|
|
- General-purpose cardioid recording microphone
- Extended frequency response
- Roadworthy construction
- Switchable 20 dB preattenuation pad
- Switchable bass cut filter
- Designed and engineered by AKG in Vienna, Austria
The Perception 120 is a 2/3-inch diaphragm true condenser microphone that offers solid build quality, outstanding performance, and excellent value. The low-mass diaphragm delivers a clear sound with accurate sonic detail. A switchable 20 dB preattenuation pad and bass cut filter make the Perception 120 an excellent choice for a wide range of recording and live sound applications.
Backed by AKG\'s six decades of experience in making microphones and input from sound engineers around the world, the Perception 120 now brings AKG studio quality to musicians and project studio applications.
Type |
2/3\" Diaphragm True Condenser |
Polar pattern |
cardioid |
Frequency range |
20 to 20,000 Hz |
Sensitivity |
22 mV/Pa (-33 dBV) |
Max. SPL |
130/150 dB (0/-20 dB) for 0.5% THD |
Equivalent noise level |
22 dB-A (IEC 60268-4) |
Signal/noise ratio (A-weighted) |
72 dB |
Preattenuation pad |
0 dB, -20 dB |
Bass filter |
12 dB/octave at 300 Hz |
Impedance |
|
Recommended load impedance |
>= 1,000 ohms |
Powering |
|
Power requirement |
48 V phantom power to DIN/IEC |
Connector |
3-pin XLR |
Finish |
metallic blue |
Dimensions |
53 dia. x 165 mm (2.1 dia. x 6.5 in.) |
Net weight |
525 g (18.5 oz.) |
Shipping weight |
955 g (33.7 oz.) |
|
The AVANTONE CK-6 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET mics…but at a fraction of their cost!
The rugged CK-6 microphone body and capsule assembly are precision machined of Brass. Aesthetically the compact body features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability.
This Transformerless CLASS A FET Microphone w/ 32mm gold sputtered thin Mylar capsule is designed with circuitry that will yield pleasing professional results comparable to much more expensive designs. It also features -10 dB pad & 80 Hz LF roll off switches for varied recording situations.
The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.
Applications
Studio vocals, acoustic guitar, mandolin, drum overheads, piano, etc…
Specifications
Type: True Transformerless Condenser
Polar Pattern: Cardioid
Frequency Response: 35-20,000 Hz +/- 3.5dB
Output Impedance: |
ΠΥΚΝΩΤΙΚΟ ΜΙΚΡΟΦΩΝΟ ΜΕ 5 ΠΟΛΙΚΑ ΔΙΑΓΡΑΜΜΑΤΑ, ΚΑΨΑ 1'' ΙΝΤΣΑΣ, ΕΝΔΕΙΚΤΙΚΑ LED ΕΠΙΛΟΓΗΣ ΠΟΛΙΚΟΥ ΔΙΑΓΡΑΜΜΑΤΟΣ ΚΑΙ ΥΠΕΡΟΔΗΓΗΣΗΣ ΕΞΟΔΟΥ ΣΗΜΑΤΟΣ, ΕΥΑΙΣΘΗΣΙΑ 23MV/PA, ΑΠΟΚΡΙΣΗ ΣΥΧΝΟΤΗΤΑΣ 20HZ-20KHZ, ΜΕΧΡΙ 158 dB MAX SPL. ΔΙΑΘΕΤΕΙ 3 ΕΠΙΛΟΓΕΣ BASS-CUT FILTER ΚΑΙ 3 ΕΠΙΛΟΓΕΣ ΠΡΟ-ΕΞΑΣΘΕΝΗΣΗΣ ΜΕ ΕΝΔΕΙΚΤΙΚΑ LED. ΠΛΗΡΩΣ ΠΡΟΣΤΑΤΕΥΜΕΝΟ ΑΠΟ ΗΛΕΚΤΡΟΜΑΓΝΗΤΙΚΕΣ ΠΑΡΕΜΒΟΛΕΣ. ΔΥΝΑΤΟΤΗΣ ΕΛΕΓΧΟΥ ΜΕΣΩ REMOTE CONTROL (ΠΡΟΑΙΡΕΤΙΚΑ). ΠΑΡΑΔΙΔΕΤΑΙ ΣΕ ΜΕΤΑΛΛΙΚΗ ΒΑΛΙΤΣΑ ΜΕ ΑΝΤΙΚΡΑΔΑΣΜΙΚΗ ΒΑΣΗ, POP FILTER ΚΑΙ ΑΝΤΙΑΝΕΜΙΟ. ΚΑΤΑΛΛΗΛΟ ΓΙΑ STUDIO RECORDING ΑΚΟΥΣΤΙΚΩΝ ΟΡΓΑΝΩΝ. 3 ΕΤΗ ΕΓΓΥΗΣΗ
Specifications
Type: 1" large diaphragm pressure gradient microphone
Polar Patterns: Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Frequency Range: 20 to 20,000 Hz
Sensitivity: 23 mV/Pa (-33 dBV) +/-0.5 dB
Max. SPL: 140/146/152/158 dB SPL (at 0/-6/-12/-18 dB)
Preattenuation Pad: -6, -12,-18 dB, switchable
Bass Cut Filter Scope: 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz
Power Requirements: 48 V phantom power to DIN/IEC
Connector: 3-pin XLR
Dimensions: 2" x 1.5" x 6.3“
Net Weight: 10.6 oz
Shipping Weight: 5 lbs (2.27 kg) |
Acoustical operating principle | Pressure transducer | Directional pattern | Omnidirectional | Frequency range | 20 Hz ... 20 kHz | Sensitivity at 1 kHz into 1 kohm | 20 mV/Pa | Rated impedance | 50 ohms | Rated load impedance | 1000 ohms | Equivalent SPL CCIR 468-3 | 28 dB | Equivalent SPL DIN/IEC 651 | 15 dB-A | S/N ratio CCIR 468-3 | 66 dB | S/N ratio DIN/IEC 651 | 79 dB | Max. SPL (tube characteristic) | K | Dynamic range (of the amplifier) | K | Maximum output voltage | 8 dBu | Weight | 800 g | Diameter | 78 mm | Length | 165 mm |
* THD of the microphone amplifier at an input voltage which is equivalent to the capsule output voltage at the specified SPL.
|
Acoustical operating principle | Pressure gradient transducer | Directional pattern | Cardioid | Frequency range | 20 Hz ... 20 kHz | Sensitivity at 1 kHz into 1 kohms | 18 mV/Pa | Rated impedance | 50 ohms | Rated load impedance | 1000 ohms | Equivalent SPL CCIR 468-3 | 21 dB | Equivalent SPL DIN/IEC 651 | 10 dB-A | S/N ratio CCIR 468-3 | 73 dB | S/N ratio DIN/IEC 651 | 84 dB | Maximum SPL for THD 0.5% | 140 dB | Maximum output voltage | 13 dBu | Dynamic range of the microphone amplifier DIN/IEC 651 | 130 dB | Supply voltage | 48 V ± 4 V | Current consumption | 3 mA | Matching connectors | XLR 3F | Weight | 480 g | Diameter | 49 mm | Length | 175 mm |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.