Stock | Διαθέσιμο κατόπιν παραγγελίας
| Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Μόνο 3 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Διαθέσιμο κατόπιν παραγγελίας
|
Content |
If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don\'t need a clavilux, just two spots. The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes. As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly. Product type Type Material Surface Color Fitting Length Stud spacing Max. load capacity Weight | Adam Hall Stands SLS 6 Lighting Stand
- Lightweight lighting stand with crossbeam and 2-stage boom arm
- Including set of 4 screws with washer, safety disc and wing nuts
Product type
Stands and Tripods
Type
Lighting Stands
Stand material
steel
Truss material
steel
Stand surface
powder coated
Crossbar surface
powder coated
Stand colour
Black
Number of extensions
2
Min. height
1240 mm
Max height
2730 mm
Transport length
1080 mm
Max. load
25 kg
Holding fixture for TV Spigot
yes
TV spigot
17 mm
Crossbar length
920 mm
Tiltable crossbar
no
Weight
3,95 kg |
- Durable, water repellent 600D nylon shell
- 10 mm foam padding
- Padded dividers
- Heavy gauge zipper
- 2 carry straps and shoulder strap
This heavy duty carry bag with 10 mm padding holds and protects four Gravity Vari-Poles® from bumps and dents. It is made of tough 600D nylon that is water repellent and easy to clean, padded dividers keep the clamping poles separate to prevent scratches. Two carry straps, a shoulder strap and the heavy gauge zipper closure provide handling convenience.
Product type
Stands and Tripod Accessories
Type
Transport bag
For number of stands
4
For type of stand
Clamping rod
Colour
Black
Material
Nylon 600D
Thickness of the padding
10 mm
Latch
zip
Width
2150 mm
Height
430 mm
Depth
120 mm
Weight
3,5 kg
|
The LS 331 B lighting stand features a large heavy steel base providing a firm footing and a single extension for a maximum height of 2.4 m. The 35 mm pole includes a male threaded M20 insert, the base tube has a female M20 end. Two integrated base handles facilitate transport.
Product type
Stands and Tripods
Type
Lighting Stands
Tube material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
1420 mm
Max height
2420 mm
Transport length
1420 mm
Height adjustment
set screw and safety pin
Number of extensions
1
Base material
Steel
Material of height adjustment
Steel
Tube diameter
35 mm
Dimensions Base (W x H x D)
563 x 563 x 15 mm
Base weight
14 kg
Interchangeable rings
1 x 30 mm
Black ring pack included
Yes
Max. load capacity
20 kg
Weight
17,8 kg
|
- Sturdy carrier bag made of 1680D ballistic nylon for the square base plate (563 x 563 mm).
- For GLS331B and GLS431B base plates
- 5 mm tough padding
- See-through window for labels
The robust, padded carrier bag, made of water-repellent 1680D ballistic nylon, is specially designed for the square base plates (563 x 563 mm) of the Gravity lighting stands GLS331B and GLS431B. It has two carrying straps with a soft Velcro handle, a sturdy double zip and a see-through window for labels.
Product type
Stands and Tripod Accessories
Type
Transport bag
Colour
Black
Material
Nylon 1680D
Thickness of the padding
5 mm
Latch
Double zip
Width
600 mm
Height
600 mm
Weight
0,591 kg |
Product type
Stands and Tripods Multimedia Equipment
Tubing surface
Powder-coated
Width adjusting jaws
40 mm
Width spacing between adjusting pins min.
120 mm
Width spacing between adjusting pins max.
425 mm
Height spacing between adjusting pins to adjusting jaws min.
117 mm
Height spacing between adjusting pins to adjusting jaws max
250 mm
Width spacing between adjusting jaws min.
130 mm
Width spacing between adjusting jaws max.
360 mm
Height adjustment
Set screw with safety split pin
Dimensions Base (W x H x D)
565 x 20 x 330 mm
Interchangeable rings
1 x 25 mm, 2 x 30 mm, 4 x 15 mm
Black ring pack included
Yes
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.