IK MULTIMEDIA I-RIG BlueBoard wireless MIDI pedalboard controller for iPhone, iPad and Mac

The first wireless MIDI pedalboard controller for iPhone, iPad and Mac

iRig BlueBoard is the first wireless MIDI pedalboard for iOS and Mac that allows you to control your music apps and more from the floor.

Now control parameters of your MIDI-compatible apps like AmpliTube wirelessly from the floor. Switch between presets, change patches, turn effects on and off and control effects like volume wah pedals all from the stage floor without worrying about tripping over wires. Setup is as simple as turning the iRig BlueBoard on and telling it what you want to control.

iRig BlueBoard features four backlit soft-touch pads housed in a sturdy, stage-worthy chassis, two TRS expansion jacks for connecting additional MIDI controllers like expression pedals, and is powered by four standard AAA batteries.

So how does iRig BlueBoard work? It connects to your iPhone/iPod touch/iPad or Mac via Bluetooth, and when you press its foot switches, it sends out control signals that are converted to MIDI by the iRig BlueBoard app.

At this point the MIDI messages are available to virtually any MIDI compatible app you're running on your iOS device or on your Mac.

The control messages sent from iRig BlueBoard to AmpliTube or other Core MIDI music apps can include bank up/down, MIDI continuous controllers, as well as parameter changes on apps such as IK's AmpliTube, VocaLive, SampleTank, and iGrand Piano iOS apps plus many others, such as Apple GarageBand.

iRig BlueBoard communicates via Bluetooth technology so you can place it up to 10 meters (32.8 feet) away from your device and still maintain full control of your apps. The low-profile iRig BlueBoard is only 9.1” (23cm) wide, and it runs on 4 - AAA batteries.

Because it communicates with the mobile device via Bluetooth, it leaves the 30-pin, Lightning and mini-jack connector on the mobile device free for connection with other IK accessories like iRig PRO, iRig HD, iRig STOMP, iRig, iRig Mic, iRig MIDI, iRig KEYS or any other favorite accessory.

• Bluetooth Wireless MIDI Pedal Board
• Bluetooth Low Energy (BLE), extremely low power consumption
• Backlit rubber pads for easy identification in the dark
• Completely wireless, battery powered (4 x AAA)
• Completely customizable setup via the iRig BlueBoard dedicated iOS and Mac apps

• Size: 275mm/10.82" x 92mm/3.62" x 25mm/0.98"
  (W x L x H)
• Weight: 250g/8.81oz

iRig BlueBoard is compatible with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPod touch 5th generation, iPad Air, iPad 4th generation, iPad 3rd generation and iPad mini. iOS 6.1 or later is required.

Mac®: iRig BlueBoard is compatible with any Mac that supports Bluetooth 4.0 / Bluetooth Low Energy. Models: iMac, Mac Mini, MacBook Air, MacBook Pro (all models from June 2012 on). Mac OS X 10.7 or later is required.

USB audio interface 24bit/96kHz δεύτερης γενιάς για Mac/iPhone/iPod/iPad. Το πρώτο interace που συνδυάζει αναλογική είσοδο Line και ενσωματωμένο μικρόφωνο για ταυτόχρονη εγγραφή. Διαθέτει δύο inputs, (XLR και 1/4'' jack) υψηλής ποιότητας και μια έξοδο ακουστικών. Εσωτερικό Phantom power+48v για χρήση εξωτερικού πυκνωτικού μικροφώνου. Στην εμπρόσθια επιφάνεια του ONE υπάρχουν Led για τις στάθμες εισόδων/εξόδων και ο κλασσικός στρογγυλός επιλογέας για την ρύθμιση των Levels των εισόδων. Είναι απόλυτα συμβατό με όλες τις core audio εφαρμογές για iOS όπως επίσης και με το iOS 7. Δυνατότητα φόρτισης του iPad/iPhone/iPod κατα τη διάρκεια της λειτουργίας της κάρτας με χρήση τροφοδοτικού. Περιλαμβάνεται το καλώδιο σύνδεσης Lightning port, καλώδιο USB για χρήση με Mac, Mic Holder, breakout cable και τροφοδοτικό. Διατίθεται επίσης το software Apogee Maestro δωρεάν για downloading.

Apogee ONE makes the legendary quality of Apogee's mic preamps, AD/DA converters and clocking available in a portable form, designed to deliver the purest recordings and best listening experience possible.

Capture Sound Without Compromise

ONE's two microphone preamps have seamless click-free transitions as the gain increases and decreases throughout the incredible gain range of 0 to 63 dB. This allows you to dial in the perfect level, either with the controller knob or from within software, while delivering ultra-low noise and smooth, crisp detail. Apogee ONE's mics are suitable for all dynamic, condenser or ribbon microphones, allowing you to capture any sound without compromise.

Two Recording Channels

The Apogee ONE's breakout cable lets you connect a microphone to the XLR input and an electric guitar, bass or acoustic pickup to the 1/4" instrument input. With up to two simultaneous channels of recording and Apogee's premium A/D conversion and mic preamp technology, you can make professional recordings anywhere.

Apogee ONE iPad, iPhone and Mac

ONE's stereo output delivers audiophile quality sound from iPhone, iPad or Mac to your headphones or speakers. You will hear every subtle detail of your work like never before, allowing you to create better mixes and enjoy your music library even more.

Setting up your studio has never been easier, with a simplified user interface and plug and play connectivity for accessories like Apogee audio interfaces.

• Material: Die cast aluminium body, moulded rubber base
• Input 1 options: Built-in microphone, Instrument IN on 1/4“, External microphone - XLR IN on breakout cable
• Input 2 options: Instrument + Built-in microphone, Instrument + External microphone
• Phantom Power: 48V on mic input
• Analog Outputs: 1/8" stereo OUTPUT for headphones or powered speakers
• Level meters: LED
• Mac connection: USB 2.0 High-Speed
• iOS device connection: USB/30-pin dock port, USB lightning connector (sold seperately) (5th gen iPod touch, iPhone 5, 4th gen iPad, iPad mini)
• AD/DA Conversion: 25 bit, up to 96 kHz sample rate
• Compatibility: Mac, iPod touch, iPhone, iPad
• Apogee Maestro control software: Mac, iPod touch, iPhone, iPad
• Built-In Microphone: Condenser/Omnidirectional
• Sound quality: 2nd Gen
• Power: Mac: bus-powered, DC optional, iOS: DC or AA battery power required
• Includes: ONE, Mic stand clip, MAC USB cable, iOS 30-pin cable, breakout cable, universal power supply, QuickStart guide

With one simple plug-and-play FireWire connection, the V4HD turns your Mac or PC desktop or laptop computer into a powerful HD/SD video production workstation equipped with all the video and audio I/O you need.

Connect all your gear, from SD camcorders and monitors to today's latest professional HD cameras, video decks, LCD reference monitors and plasmas – all at the same time, with no cable swapping. Choose your input source, then log and capture HD or SD clips directly into Final Cut Pro or Premiere Pro.

In Final Cut Pro, the V4HD supports full-raster 1920x1080 HD capture and playback using Apple's ProRes 422 codec in both standard and HQ modes. The V4HD is the ideal all-in-one video capture solution for any ProRes workflow.

System Requirements for the V4HD

The V4HD has the following system requirements.

• 1 GB of RAM; 2 GB or more recommended
• Available FireWire 400 or 800 port
• Available USB port (for firmware updates)
• Large hard disk drive (preferably at least 500 GB)
• CD-ROM disc drive for installation

• PowerPC G5 CPU or faster; Intel CPU and multiple CPUs or multiple-core CPU highly recommended. An Intel CPU is required for ProRes support.
• Mac OS X version 10.4, 10.5, or 10.6; version 10.4.9 or later is required
• For use with Final Cut Pro 5.1 or later; Final Cut Pro 6.0 or later is required for ProRes. Final Cut Pro 7.0 or later is recommended under Mac OS X v10.6.

32-bit

• Pentium 4 CPU 1 GHz or faster; multiple processors or multiple cores highly recommended
• 32-bit operating system: Windows 7, Vista, or XP Professional SP3
• For use with Premiere Pro CS3 version 3.1 or later; CS4 support requires version 4.0.1 or later

64-bit

• Intel Core 2 Duo or AMD Phenom II processor
• 64-bit operating system: Windows 7, Vista, or XP
• For use with Premiere Pro CS4 version 4.2.1 or later; CS5 support requires Windows 7 or Windows Vista

Supported NVIDIA graphics cards for GPU acceleration

• Quadro FX line (3800, 4800 and 5800)
• GeFore GTX series (285 and 470)

Ίδια χαρακτηριστικά με QUARTET με επιπλέον σύνδεση σε IoS συσκευές. Χαρακτηριστικά QUARTET: USB audio interface για MAC. Διαθέτει 4 αναλογικές εισόδους XLR/TRS με υψηλής ποιότητας προενισχύσεις. Monitor out που υποστηρίζει μέχρι και 3 ζεύγη studio monitor για άμεση εναλλαγή. USB 2, ADAT/SMUX ψηφιακές εισόδοι, Midi INPUT (USB), 8 αναλογικές έξοδοι, οθόνη πολλαπλών ενδείξεων OLED, κεντρικός επιλογέας ελέγχου, 6 κουμπιά αφής άμεσης απόκρισης και 3 assignable, συμβατό με Logic Pro-Final Cut-Pro Tools 9 και 10-Ableton Live. Περιλαμβάνει το apogee maestro software.

Universal MIDI interface for iPhone, iPod touch, iPad and Mac/PC

Introducing iRig MIDI 2, the first Lightning/USB compatible mobile MIDI interface that works with all generations of iOS devices as well as Mac and PC. It features everything you loved about iRig MIDI but with even greater pocketability, connectivity and control. Simply put, it's the perfect MIDI solution for the musician on the move.

• Universal MIDI interface for Lightning iOS devices as well as all prior generations of iPhone, iPad and iPod touch plus Mac and PC
• Ultra-portable, pocket-sized form factor that you can take with you anywhere
• Detachable bumper-friendly cables for seamless, universal connectivity
• Lighting connector and USB cable included, 30-pin cable available separately
• Standard-sized MIDI IN, OUT and THRU ports
• MIDI IN/OUT LED indicators for at-a-glance monitoring of MIDI data transmission
• Draws power from host device instead of a bulky power adaptor
• Comes with a powerful suite of music creation apps SampleTank Free, iGrand Piano FREE and SampleTank 3 SE
• Elegant and durable rubberized enclosure
• Designed and made in Modena, Italy

• Universal MIDI interface for iPhone, iPod touch, iPad, Mac and PC
• MIDI IN and OUT activity LEDs
• Connect to the device via standard Mini-DIN port (Mini-DIN to Lightning cable included, Mini-DIN to USB cable included)
• MIDI IN, OUT, and THRU ports
• Powered by the host device

• iRig MIDI 2
• iOS Lightning connection cable (60cm/23.6“)
• USB connection cable (60cm/23.6“)

• 49.5mm/1.95" x 78mm/3.1" x 30mm/1.18“
• Weight: 60g/2.12oz

The all-in-one audio/MIDI interface that fits in your pocket. The only Interface you need for making music on the go.

Wouldn't it be great to have one compact portable interface for your iPhone, iPad or Mac that you could use to connect your studio mics, your guitar or bass, your keyboards and your MIDI controller, and play, practice and record on the go? Ta Da! Now you can with iRig PRO.

iRig PRO is the first full-featured compact audio and MIDI interface you can use with your XLR microphones, your guitar and bass, your keyboard or other line-level source and your MIDI controllers. It features an XLR/1/4" combo jack for connecting microphones and instruments (accepts XLR and 1/4" TS cables), and a MIDI input for plugging in your favorite controller.

Now when you're on the go, you can record vocals, harmonies, acoustic instruments, electric guitar/bass, keyboards and more without changing your interface and disrupting your creative flow. You will find iRig PRO to be the most versatile iPhone and iPad accessory in your gig bag. And when you get back to your Mac, plug iRig PRO into your USB port and keep jamming away on your laptop or desktop.

You'll be amazed by the compact design of the unit and what it actually delivers. About the size of a travel tube of toothpaste, iRig PRO fits nicely into small spaces like your gig bag, the accessory compartment of your hardshell case or the side pocket of your cargo shorts. Just don't forget about it and run it through the laundry.

iRig PRO can handle all of your stuff, including XLR condenser mics, guitars and basses, keyboards and other line-level sources, and MIDI controllers. Whatever you're connecting to your device, iRig PRO has you covered. And iRig PRO comes with 3 connector cables: Lightning, 30-pin and USB, to ensure that you've got the right connections.

• Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
• Maximum Input Level: from 30 mVpp to 6.9 Vpp
• Instrument Input Impedance: 620 kOhms
• Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
• Microphone Input Level: from 6 mVpp to 1.4 Vpp
• Microphone Input Impedance: approx 2 kOhms
• Gain Control Range: 47 dB
• Phantom Power: 48V +/-10%
• Input Noise: -97 dB RMS, -105 dB(A)
• Distortion (THD): 0.01%
• Frequency Response: 20Hz-20kHz +/- 0.5 dB
• Conversion: 24-bit A/D
• Sampling Rate: 44.1 and 48 kHz
• Battery: 9V (Alkaline suggested), needed for +48V phantom only

Compatible with iPhone 5, iPhone 4S, iPhone 4, iPod touch (5th, and 4th generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 5.1 or later is required.

Mac®: Mac OS X 10.5 or later. One free USB port.

Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.