Content |
PSA-15 Bi-amp (244+55Wrms) ενεργό ηχείο 2δρόμων από τη JB-SYSTEMS ιδανικό για φορητές & μόνιμες εγκαταστάσεις. Το PSA-15 διαθέτει woofer 15”, compression driver 1.75”, 40Hz-20KHz, 2balanced εισόδους (2mic, 1line), 23.3Kg, τοποθετείται και ως stage monitor.
- JB-SYSTEMS PSA-15 Bi-amp ενεργό ηχείο 2 δρόμων, ιδανικό για φορητές και μόνιμες εγκαταστάσεις. Το PSA-15 μπορεί να τοποθετηθεί και ως monitor stage, με τη βοήθεια ειδικών monitor stands, οι οποίες και περιλαμβάνονται στη συσκευασία. Πρόκειται για ένα ηχείο bi-amp, δηλαδή με 2 επιμέρους ενισχυτές, οι οποίοι έχουν ισχύ 244Wrms + 55Wrms.
- Χρήση: ηχείο γενικής χρήσεως, ιδανικό για μόνιμες και φορητές εγκαταστάσεις, δυνατότητα τοποθέτησης του οριζόντια ως stage monitor
- Τύπος: αυτοενισχυόμενο (ενεργό) bi-amp ηχείο full range
- Δρόμοι: 2-way
- LF driver: 15” high power woofer
- HF driver: 1.75” compression driver
- Διασπορά: -
- Τύπος φόρτισης καμπίνας: bass reflex
- Ισχύς ενισχυτών: LF amp 244Wrms, HF amp 55Wrms
- Συχνότητα αποκοπής: -
- SPL: - dB max
- Απόκριση συχνότητας: 40Hz-20KHz (+/-3dB)
- Συνδέσεις είσοδοι: 2x μικρόφωνο σε XRL balanced , 1/4 JACK balanced / unbalanced, 1x line σε XLR balanced ή 1x stereo line σε RCA
- Συνδέσεις εξόδων: 1x line out σε XLR ή 1/4" JACK balanced / unbalanced
- Ρυθμίσεις: level control για την κάθε είσοδο, γενική ρύθμιση volume
- Equalizer: 2 band EQ (bass trebble) +/- 12dB @ 100Hz
- Cooling: παθητική ψύξη χωρίς ανεμιστήρα
- Στήριξη / ανάρτηση: Εσωτερική φωλιά Ø 35mm για την τοποθέτηση του ηχείου σε βάση, 4x M8 rigging points για την ανάρτηση του ηχείου
- Υλικό κατασκευής: ανθεκτική πλαστική καμπίνα από πολυπροπυλένιο
- Η συσκευασία περιλαμβάνει: αυτοενισχυόμενο ηχείο jb-systems psa-15, user΄s manual, 2monitor stands, καλώδιο τροφοδοσίας
- Τροφοδοσία: AC 220 / 50Hz
- Διαστάσεις: 680x 470x 400mm
- Βάρος: 23.3kg
|
Features
400 Watt digital bi-amplification
128 dB max spl
Wide dispersion 90 x 60 constant directivity horn
15" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 128 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 15" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-Jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Connections: VDE
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 708/27.8 mm/inch
Width: 437/17.2 mm/inch
Depth: 389/15.3 mm/inch
Net Weight: 18.2/40.12 kg/lbs
| Αυτοενισχυόμενο subwoofer σε ξύλινη καμπίνα με woofer 18”. Eνισχυτής 400W RMS class D με limiter και ενσωματωμένο crossover 100Hz. Απόκριση συχνότητας 40-130Hz max SPL 123dB. Είσοδοι balanced XLR/JACK TRS, Link out με Balanced XLR. Ρύθμιση normal ή boost για την ενίσχυση ή όχι των χαμηλών συχνοτήτων Bάρος 31,3kg σε μαύρο χρώμα. Διαθέτει φωλιά για βάση στήριξης.
Κατασκευαστής |
DYNACORD |
Application |
Concert, Installation, Portable PA |
Τύπος Ηχείου |
Ενεργό |
Κατηγορία Ηχείου |
SubWoofer |
Υλικό Κατασκευής |
Ξύλινη Καμπίνα |
Χρώμα |
Μαύρο |
Βάρος (kg) |
31,3 |
Συνολική Ισχύς (Watt) |
400 |
Διάμετρος Woofer (inches) |
18 |
dB (max spl) |
123 |
Απόκριση συχνοτήτας (Hz) |
40-130 |
Σειρά |
A-LINE series |
Μοντέλο |
A118A |
Part Number |
F01U297976 |
Εγγύηση |
3 Χρόνια Εγγύηση |
|
Ενεργό ηχείο δύο δρόμων 1100W με 15” woofer και 1” HF compression driver με κόρνα διασποράς (ΗxV) 90°x60° @ -6dB, 130dB max SPL cont., απόκριση συχνότητας: 45Hz – 18kHz ±3dB. Ενισχυτής τύπου Class D. Τραπεζοειδής καμπίνα με δυνατότητες ανάρτησης. Διαθέτει εισόδους Mic/Line combo jack/θηλυκό XLR και εξόδους αρσενικό XLR.
Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.
Turbosound Milan M15 Powered PA Speaker at a Glance:
- Composite cabinet makes this powerful speaker strong and lightweight
- Flexible input options for virtually any application
- Designed to serve double-duty as a floor monitor too
Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.
Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.
Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.
Turbosound Milan M15 Powered PA Speaker Features:
- Active PA speaker with 15" LF driver and 1,100W Class-D power amp
- Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
- Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
- Bass and Treble EQ controls let you fine-tune your sound
- Dual-angle pole mount socket makes it easy to position for optimum sound coverage
- Injection-molded polypropylene enclosure is strong and lightweight
- Recessed carry handle makes transport and setup easier
- Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping
Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design Specification | Detail | Powered | Yes | Power Configuration | Bi-amped | LF Driver Size | 15“ | LF Driver Power Amp | 1,000W (peak) Class-D | HF Driver Size | 1“ | HF Driver Power Amp | 100W (peak) Class-D | Frequency Range | 45Hz-18kHz (±3dB), 40Hz-20kHz (-10dB) | Maximum Peak SPL | 130 dB | Horizontal Coverage Angle | 90 degrees | Vertical Coverage Angle | 60 degrees | Enclosure Material | Polypropylene | Mounting Options | Pole, Floor Wedge, Fly | Inputs | 2 x XLR/TRS combo | Outputs | 1 x XLR | Height | 28.3“ | Width | 18“ | Depth | 14.5“ | Weight | 60.9 lbs. | Manufacturer Part Number | M15UL |
|
Product Features:
High-Power 1000-Watt 2-way PA sound reinforcement speaker system for live and playback applications
Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure levels
High-performance MP3 player included to play audio files via USB stick
"Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
2-channel mixer with individual Mic/Line inputs, Volume controls and Clip LEDs
Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Extremely powerful 15'' long-excursion driver provides incredibly deep bass and acoustic power
State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
Ultra-wide dispersion, large-format exponential horn
Additional Line output allows linking of additional speaker systems
Versatile trapezoidal enclosure design allows different positioning:
- Stand mounting with 35-mm pole socket
- Tilts on its side for use as a floor monitor
Ergonomically shaped handles for easy carrying and setup
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
User's Manual
|
Quasi 3-Way Active Tri-amplified Speaker System.
SPOT2500T is composed of an active full-range cabinet and a passive bass cabinet.
It is a high directivity, long throw compact systems, characterized by extremely high intelligibility, even at long distances, making it the perfect choice for live applications. This system was designed to simplify the task of assembling clusters by simply placing multiple enclosures side-by-side when wider horizontal dispersion is required.
SPOT 2500T is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of both the power output and the temperature (both internal and external) of the amplifier; it also includes a dedicated standby function which results in reduced power consumption when no signal is present.
5 presets are available, one of which may be customized by the user and loaded into the DSP, thus adapting the speaker's acoustic response to the user's personal taste. The Internal DSP controller also provides an auxiliary output that may be used to drive an external subwoofer, be it equipped with internal filters or not. The presets can be modified by means of the Montarbo proprietary software program RAConLS™ with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter 'fully parametric' equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier's status (temperature, protection circuits, limiters and thermal alarms); selection of the type of subwoofer used.
- 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2500 Watts EIAJ (1000 + 1000 W for the LF drivers, 500 W for the HF).
- 140 dB max SPL.
- Two 15" woofers (one of which in the passive bass module) with 4" voice coil, featuring a shielded front-mounted neodymium magnet.
- HF driver with a 1.4" throat and a 3" voice coil, featuring a neodymium magnet and titanium diaphragm. - High directivity (50° H x 40° V) wave-guide horn.
- Montarbo 56 bit DSP, 180 MHz, 24 bit converters.
- Dedicated standby function.
- Processed auxiliary output allows to drive an external subwoofer.
- 5 presets one of which may be customized and loaded into the DSP.
- Presets remote control and customization by means of the proprietary software program RAConLS™ and the optional LD2.4 USB interface.
- With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.
- The geometry of the cabinet allows for easy construction of clusters. A 3-system cluster results in a 150° horizontal coverage.
- Birch plywood cabinet, finished with anti-abrasion paint.
- Threaded studs (M10) for safe and simple suspension; adapter for coupling bar (SM3, optional); 2 ergonomically designed handles.
APPLICATIONS
- Coverage of large areas.
- Stage-monitoring applications (in-fill system).
- In-house system in theatres and in live-performances venues.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.