Content |
JBL Control 24 Series Driver Description: This (MPN 124-13000-00) is a replacement JBL Control 24 series coaxial driver.
This is a replacement JBL Control 24 series coaxial driver. It has a set of input spades for the LF part and a separate pair of wires exiting thru the back of the magnet to reach the voice coil of the HF unit. Compact and tough, a mighty reproducer in a small package. Remember, it does not include a crossover network. It is intended as a replacement for a blown unit in a JBL Control 24 series unit...you hobbiests will have to provide the external crossover that is already in the Control 24 mounting container. The opening for a front load is 3.5+" with the overall depth of 4" and 3.16" remaining under the baffle. It is a genuine replacement part and it is shipped to you sealed just the way we get it from JBL.
| | |
Nominal Specifications
* Nominal Diameter 5“, 130 mm
* Overall Diameter 6.02/5.51“, 153/140 mm
* Bolt Circle Diameter 5.5“, 139 mm
* Baffle Cutout Diameter 5.04“, 128 mm
* Depth 3.1“, 79 mm
* Flange and Gasket Thickness 0.29“, 7.5 mm
Electrical Specifications
* Minimum Impedance 8.8 Ohm
* Nominal Impedance 12 Ohm
* Nominal Power Handling*** 80 W
* Maximum Power Handling**** 160 W
* Sensitivity (1W/1m) 99 dB
* Frequency Range 180 - 6300 Hz
* Voice Coil Diameter 1.26“, 32 mm
* Winding Material Copper
* Former Material Kapton
* Winding Depth 0.29“, 7.5 mm
* Magnetic Gap Depth 0.24“, 6 mm
* Flux Density 1.65 T
THIELE & Small Parameters
* Resonant Frequency (fs) 180 Hz
* DC Resistance (Re) 7.2 Ohm
* Coil Inductance (Le) 0.15 mH
* Mechanical Q (Qms) 2.70
* Electromagnetic Q (Qes) 0.59
* Total Q (Qts) 0.48
* Compliance Equivalent Volume (Vas) 0.033 ft³, 0.93 dm³
* Mechanical Compliance of Suspension (Cms) 0.075 mm/N
* Rms 3.93 Kg/s
* BL Product (BL) 11.3 N/A
* Diaphragm Mass inc. Airload (Mms) 8.4 grams
* Maximum Linear Excursion (Xmax)* 2.75 mm
* Xdamage** 15.2 mm
* Surface Area of Cone (Sd) 14.6“², 94.3 cm²
* Diaphragm mass (Mmd) 7.5 g
* Eta Zero 1.23 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
- 91 dB Sensitivity 1 W / 1 m
- 130 W Power Handling
- 1.5" Sandwich Voice Coil
- Double treated Cone for Water Protection
- Neodymium Magnet System
- Twin Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2- or 3-way Systems
|
6.5" Neodymium Coaxial Transducer - 90 dB sensitivity 1 W / 1 m
- 130 W + 25 W Power Handling
- 1.5" + 1" Voice Coil
- Single point source providing coherent wave front
- 90° conical dispersion
- Optimal for compact 2-way Systems
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.