| Content |
Πληροφορίες
Αυτοενισχυόμενο ηχείο 2 δρόμων 750W RMS, τύπου bass reflex, 15" woofer + 3" HF driver με μαγνήτη νεοδυμίου. Διαθέτει ενισχυτή D Class 2000W (peak) της Crown με τεχνολογία DriveCore, ενσωματωμένο DSP, V5 tuning συμβατό με συστήματα Vertec και VTX, HiQnet Network για απομακρυσμένο έλεγχο μέσω IOS και Android συσκευές. Στιβαρή κατασκευή, διαθέτει χερούλια μεταφοράς, σημεία στήριξης Μ10, υποδοχή 35mm για τρίποδα και ειδικά πόδια για χρήση ως μόνιτορ. Το ενσωματωμένο DSP περιέχει 20 PEQʼs, delay ως και 2 sec, γεννήτρια ήχου, input mixing, amplifier monitoring και 50 user preset. Επιπλέον διαθέτει μίκτη 2 καναλιών με είσοδο xlr combo και μια xlr έξοδο σε κάθε μια ξεχωριστά και μια γενική έξοδο mix, oθόνη LCD για γρήγορο και εύκολο configuration και setup. Max SPL 137dB, απόκριση συχνότητας 44Hz- 20kHz (-3 dB), διασπορά 90? x 50?. Διαστάσεις 691 x 458 x 478 (Υ x Π x Β), βάρος 28,6 kg, χρώμα μαύρο. Ιδανικό για εταιρίες ενοικιάσεως ήχου, DJ sets, μόνιμες εγκαταστάσεις.
|
Features
400 Watt digital bi-amplification
128 dB max spl
Wide dispersion 90 x 60 constant directivity horn
15" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 128 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 15" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-Jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Connections: VDE
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 708/27.8 mm/inch
Width: 437/17.2 mm/inch
Depth: 389/15.3 mm/inch
Net Weight: 18.2/40.12 kg/lbs
|
Ενεργό ηχείο δύο δρόμων 1100W με 15” woofer και 1” HF compression driver με κόρνα διασποράς (ΗxV) 90°x60° @ -6dB, 130dB max SPL cont., απόκριση συχνότητας: 45Hz – 18kHz ±3dB. Ενισχυτής τύπου Class D. Τραπεζοειδής καμπίνα με δυνατότητες ανάρτησης. Διαθέτει εισόδους Mic/Line combo jack/θηλυκό XLR και εξόδους αρσενικό XLR.
Powerful, Lightweight PA Speakers for Any Application You'll be impressed by how easy it is to fill a room with powerful, pristine sound with Turbosound Milan M15 powered loudspeakers. This 15-inch, 1,100-watt speaker is perfect for live music applications, and just as appropriate for schools, churches, or even corporate A/V installations. The coverage is wide and consistent, and doesn't sound strange when you get out of the main coverage area - some of the major factors Sweetwater considers when we're designing live sound systems. Whether you use it as a PA speaker or a stage monitor you can expect tight and powerful lows, rich and detailed mids, and smooth highs from the Milan M15.
Turbosound Milan M15 Powered PA Speaker at a Glance:
- Composite cabinet makes this powerful speaker strong and lightweight
- Flexible input options for virtually any application
- Designed to serve double-duty as a floor monitor too
Composite cabinet makes this powerful speaker strong and lightweight
You'll notice the Milan M15 is remarkably lightweight for a 15-inch PA speaker, at just over 60 pounds. That's due to the cabinet design, which is made from injection-molded polypropylene. And if you look close you'll see a ribbed pattern on the cabinet's exterior (it's actually on the interior as well). That ribbing not only adds strength and rigidity, it also helps cut down on cabinet resonance. Basically, the Milan M15 lets you take advantage of a lighter, stronger design without compromising your sound quality.
Flexible input options and sound shaping for virtually any application
You can connect practically any sound source to the Milan M15, from your mixer's line outputs to instruments and microphones. And you've got two inputs available, so the Milan M15 is a perfectly viable solution for coffee shop performances with a guitar and vocal mic. It's also perfect for public speaking - in fact, there's a Speech/Music mode switch that optimizes the performance for those applications.
Designed to serve double-duty as a floor monitor too
The powerful sound and lightweight design make the Milan M15 an ideal main PA speaker, it's designed to serve you well as a stage monitor too. The trapezoidal design doesn't just make it easy to handle, it also angles the Milan M15 up at you when you place it on the side. Switch on the 100Hz low-cut filter, and now you've got a sweet-sounding floor monitor that won't add rumble to your stage sound.
Turbosound Milan M15 Powered PA Speaker Features:
- Active PA speaker with 15" LF driver and 1,100W Class-D power amp
- Klark Teknik DSP optimizes your sound with dynamic equalization and intelligent limiting
- Specially-designed waveguide gives you wide, consistent coverage with natural off-axis sound
- Bass and Treble EQ controls let you fine-tune your sound
- Dual-angle pole mount socket makes it easy to position for optimum sound coverage
- Injection-molded polypropylene enclosure is strong and lightweight
- Recessed carry handle makes transport and setup easier
- Front-panel LED indicators indicate if a signal is present, when limiting is occurring, and when signal is clipping
Get the Turbosound Milan M15 for powerful sound in a strong, lightweight design | Specification | Detail | | Powered | Yes | | Power Configuration | Bi-amped | | LF Driver Size | 15“ | | LF Driver Power Amp | 1,000W (peak) Class-D | | HF Driver Size | 1“ | | HF Driver Power Amp | 100W (peak) Class-D | | Frequency Range | 45Hz-18kHz (±3dB), 40Hz-20kHz (-10dB) | | Maximum Peak SPL | 130 dB | | Horizontal Coverage Angle | 90 degrees | | Vertical Coverage Angle | 60 degrees | | Enclosure Material | Polypropylene | | Mounting Options | Pole, Floor Wedge, Fly | | Inputs | 2 x XLR/TRS combo | | Outputs | 1 x XLR | | Height | 28.3“ | | Width | 18“ | | Depth | 14.5“ | | Weight | 60.9 lbs. | | Manufacturer Part Number | M15UL |
|
|
The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M8 threaded rigging points are provided for a variety of safe flying
configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.
Mixer and Controls
The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.
| |
SPECIFICATIONS
| | MODEL | TITAN 15 ACTIVE | | GENERAL INFO |
| | System type | Active 15" 2-way Bi-Amplified | | Frequency response +/- 3db | 50-20kHz | | HF SECTION |
| | Hf type | Titanium Compression Driver | | Horn dispersion (H x V) | 90° x 60° | | Hf exit size mm / inches | 25mm / 1“ | | PHYSICAL FEATURES |
| | Enclosure Material | Injection Moulded Polypropylene | | Enclosure Colour | Grey or White or Black | | Size (mm/inches) | 381mm / 15“ | | IN / OUT PANEL (speaker Level) |
| | Input connector | XLR - 1/ 4" Combo jack | | AMPLIFIER POWER |
| | Power On Protection | Power switch on / off mute | | Thermal Protection | Amplifier shutdown, auto reset | | Low Line Voltage Shut Down | 60% Nominal line voltage | | Driver Protection | Independent LF and HF limiters | | DC Protection | Yes | | Short Protection | Yes | | Controls | High (±10dB) 10kHz Shelving | | Dimensions (HxWxD) |
| | mm | 708.3mm x 477.8mm x 401.77mm | | inches | 27.9" x 18.8" x 15.8“ | | Microphone / Transmitter |
| | Maximum Input Level | +22dBu | | Impedance | 4 Ω | | MIXER MODEL |
| | INPUT IMPEDANCE | Balanced: 20k ohms Unbalanced: 10k ohms | | Clip Limiter | Turns on approx 350W output | | Limiter Indicator | Red LED | | Power Indicator | Red LED | | AC Power details |
| | Power Supply | High Efficiency Switching Mode Power Supply | | AC Power Options | AC100~120V / 220~240V, 50 / 60Hz | | Power On Indicator | LED | | Rigging / Bracket / | 10 M8 threaded inserts including 4 | | Mounting Options | M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket | | Impedance Balanced | Balanced: 1k ohm - Unbalanced: 500 ohm | | Line Output |
| | Line Output Connector | Switchable LOOP / MIX Balanced Male XLR | | Input A - type | Switchable balanced mic or line level input | | Input Sensitivity | Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms) | | Maximum Input Level | +22dBu | | Input Connector | XLR - 1/ 4" Combo jack | | Input Impedance | Balanced: 20k ohms Unbalanced: 10k ohms | | Input B - type | Line level input | | Input Sensitivity | XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms) | | Maximum Input Level | +22dBu | | Input Connectors | Combo jack: 1/4" - XLR / Summed dual RCA jacks | | Bass Response Optimizer |
| | (“BRO“™) circuit | +5dB at 60Hz | | Subsonic Filter | 30Hz, Second-order filter | | Amplifiers |
| | Low-Frequency (Class D) | Rated 350W RMS, 700W Peak | | High- Frequency (Class A/B) | Rated 70W RMS, 140W Peak | | Electronic Crossover | 24dB/octave Linkwitz-Riley | | Crossover Frequency | 1.8kHz | | Controls | High (±10dB) 10kHz Shelving | | Equalization | Low (±10dB) 100Hz Shelving | | DIMENSIONS & WEIGHT |
| | Net weight ( kg / lbs ) | 23.7kg / 52.67lbs | | Gross weight ( kg / lbs ) | 26.94kg / 59.27lbs | |
|
Two-way active full range with DSP. 1500W
15'' woofer, 3'' driver, 50 x 40 dispersion.
1000W + 500W class D power amplifier.
Optional: LD2.4 USB interface for remote PC connection.
CV-Spot protective cover. NOTE : SPOT 1500 can not drive the bass cabinet SPOT15B.
|
Quasi 3-Way Active Tri-amplified Speaker System.
SPOT2500T is composed of an active full-range cabinet and a passive bass cabinet.
It is a high directivity, long throw compact systems, characterized by extremely high intelligibility, even at long distances, making it the perfect choice for live applications. This system was designed to simplify the task of assembling clusters by simply placing multiple enclosures side-by-side when wider horizontal dispersion is required.
SPOT 2500T is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of both the power output and the temperature (both internal and external) of the amplifier; it also includes a dedicated standby function which results in reduced power consumption when no signal is present.
5 presets are available, one of which may be customized by the user and loaded into the DSP, thus adapting the speaker's acoustic response to the user's personal taste. The Internal DSP controller also provides an auxiliary output that may be used to drive an external subwoofer, be it equipped with internal filters or not. The presets can be modified by means of the Montarbo proprietary software program RAConLS™ with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter 'fully parametric' equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier's status (temperature, protection circuits, limiters and thermal alarms); selection of the type of subwoofer used.
- 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2500 Watts EIAJ (1000 + 1000 W for the LF drivers, 500 W for the HF).
- 140 dB max SPL.
- Two 15" woofers (one of which in the passive bass module) with 4" voice coil, featuring a shielded front-mounted neodymium magnet.
- HF driver with a 1.4" throat and a 3" voice coil, featuring a neodymium magnet and titanium diaphragm. - High directivity (50° H x 40° V) wave-guide horn.
- Montarbo 56 bit DSP, 180 MHz, 24 bit converters.
- Dedicated standby function.
- Processed auxiliary output allows to drive an external subwoofer.
- 5 presets one of which may be customized and loaded into the DSP.
- Presets remote control and customization by means of the proprietary software program RAConLS™ and the optional LD2.4 USB interface.
- With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.
- The geometry of the cabinet allows for easy construction of clusters. A 3-system cluster results in a 150° horizontal coverage.
- Birch plywood cabinet, finished with anti-abrasion paint.
- Threaded studs (M10) for safe and simple suspension; adapter for coupling bar (SM3, optional); 2 ergonomically designed handles.
APPLICATIONS
- Coverage of large areas.
- Stage-monitoring applications (in-fill system).
- In-house system in theatres and in live-performances venues.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.