| Content | The MCX 10 is a compact high-performance coaxial stage monitor. Depending on the application, the design enables three set-up options: 35° angle for moni-toring from short distances, 55° for longer distances, and 90° e.g. for front-fill applications at the stage edge. Due to its inconspicuous design, the MCX 10 fits harmoniously and eleganty into all surroundings. The speaker features a broad dispersion of 70°. The highly sturdy monitor convinces with its precise sound reproduction and gives musicians on stage a top-class sound experience. The flange inside the handle provides the possibility to use the MCX 10 as a PA system on a high stand. If required, the MCX 10 combines perfectly with the QLB 215 or QLB 118 X/G subwoofers. The monitor offers three Neutrik NL4 speakon connectors. Two of them are placed on the side of the high stand flange.
enclosure design for different positions (speaker stand, monitor, front fill)
- wooden enclosure with weatherresistant polurethane coating
- impregnated speaker membrane for permanent protection against moisture
- coaxialer enclosure design for homogeneous dispersion
- extremely low acoustic feedback behavior
- natural, transparent sound
- pole mount integrated in side handle
- left- and back facing connector panel
- compact dimensions und low weight
- flyable (truss mounting) with optional flying frame
| Components |
10“ + 1,3“ (2,5“ voice coil), coaxial |
| Dispersion (h x v) |
70° conical |
| Nominal load (AES / program) |
300 / 600 W |
| Impedance |
8 ohms |
| SPL nom. (Fullspace@1W/1m) / max. SPL (at AES nominal load) |
95 / 120 dB |
| Frequency range (-6 dB) |
70 Hz – 19 kHz |
| Dimensions (W x H x D) |
405 x 325 x 400 mm |
| Weight |
15 kg |
| Connectors |
3x Speakon NL4 (2x right, 1x left) |
| Finishing |
PU coating (black) |
| Mounting threads |
2x mounting thread M10, 1x M8 safety thread |
| Special features |
2x butterfly handle four sided, pole mount |
| Protective grille |
sturdy front grille with acoustic foam |
| Design |
low profile stage monitor with 3 possible positions (35°, 55°, 90°) |
| Protection class |
IP 44 |
|
ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Sidefill monitor for small- to medium-scale applications
- • Rental companies
- • Professional musicians
Γενικά Χαρακτηριστικά
1200 Watt Peak, 600 Watt RMS
131 dB max SPL
45 Hz - 20 kHz frequency response
15" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil
Ακουστικά Χαρακτηριστικά
Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 131 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 15“, 2.5" voice coil
Είσοδος/Έξοδος
Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female
Processor Section
Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter
Amplifier Specifications
Total power: 1200 W PEAK
High frequencies: 400 W PEAK
Low frequencies: 800 W PEAK
Total power: 600 W RMS
High frequencies: 200 W RMS
Low frequencies: 400 W RMS
Χαρακτηριστικά Καμπίνας
Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black
Διαστάσεις/Βάρος
Height: 362/14.25 mm/inch
Width: 673/26.49 mm/inch
Depth: 473/18.62 mm/inch
Net Weight: 20.7/45.63 kg/lbs | The MCX 15 is a coaxial high performance monitor with low profile casing design. The design enables two set up options – with a flat angle of 35° for a monitoring from near to short distances and a steep angle of 55° for longer distances. With its elegant look it harmoniously fits into all surroundings. Due to the solid construction and the high protective front grid the MCX 15 can deal perfectly with
the hard stage requirements. The dispersion of 60° vertical and 40° horizontal has been adapted to the monitor angle and can be rotated by 90°. Each, left and right side includes a connection panel with each two Neutrik NL 4 Speakon sockets for an efficient cabeling and linking of the stage signals. In multifunctionality the MCX 15 sets new standards with a highstand flange inside the handle and two KME Variofix mounting points where a flying frame can be installed quickly and easy without any tools. The MCX 15 can be combined with the subwoofers QLB 215 and QLB 118 X/G, e.g. as a drum fill or front system.
enclosure design for different positions (speaker stand, monitor, front fill)
- wooden enclosure with weatherresistant polurethane coating
- impregnated speaker membrane for permanent protection against moisture
- coaxialer enclosure design for homogeneous dispersion
- extremely low acoustic feedback behavior
- natural, transparent sound
- pole mount integrated in side handle
- left- and back facing connector panel
- compact dimensions und low weight
| Components |
15“ + 1,4“ (3“ voice coil), coaxial |
| Dispersion (h x v) |
60° x 40° (rotatable) |
| Nominal load (AES / program) |
500 / 1000 W |
| Impedance |
8 ohms |
| SPL nom. (Fullspace@1W/1m) / max. SPL (at AES nominal load) |
98 / 125 dB |
| Frequency range (-6 dB) |
60 Hz - 19 kHz |
| Dimensions (W x H x D) |
600 x 370 x 470 mm |
| Weight |
26 kg |
| Connectors |
4x Speakon NL 4 (2x right, 2x left) |
| Finishing |
PU coating (black) |
| Mounting threads |
2x M8 mounting thread (until 2018: 2x Variofix points M10), 1x M8 safety thread |
| Crossover frequency |
1300 Hz |
| Special features |
2x butterfly handle four sided, pole mount |
| Protective grille |
sturdy front grille with acoustic foam |
| Design |
low profile stage monitor with 3 possible positions (35°, 55°, 90°) |
| Protection class |
IP 44 |
|
ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.
APPLICATIONS
- • Main vocal stage monitor
- • High-output drum or keyboard monitor
- • Sidefill monitor for small- to medium-scale applications
- • Rental companies
- • Professional musicians
Γενικά Χαρακτηριστικά
800 Watt Peak, 400 Wat RMS
129 dB max SPL
45 Hz - 20 kHz frequency response
12" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil
Ακουστικά Χαρακτηριστικά
Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 129 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 12“, 2.5" voice coil
Είσοδος/Έξοδος
Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female
Processor Section
Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter
Amplifier Specifications
Total power: 800 W PEAK
High frequencies:200 W PEAK
Low frequencies: 600 W PEAK
Total power: 400W RMS
High frequencies:100 W RMS
Low frequencies: 300 W RMS
Χαρακτηριστικά Καμπίνας
Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black
Διαστάσεις/Βάρος
Height: 318/12.51 mm/inch
Width: 594/23.38 mm/inch
Depth: 400/15.74 mm/inch
Net Weight: 18/39.68 kg/lbs |
Περιγραφή
Το MON 10 A G3 αποτελεί μέρος μιας εντελώς νέας οικογένειας τροφοδοτούμενων οθονών σκηνής για υψηλές επιδόσεις. Η σειρά MON G3 ενσωματώνει την προηγμένη τεχνολογία και τα κορυφαία υλικά που βρίσκονται σε οθόνες υψηλών προδιαγραφών που συνήθως ενοικιάζονται από επαγγελματίες, καθιστώντας αυτή την ποιότητα διαθέσιμη σε όλους. Αυτά περιλαμβάνουν, για παράδειγμα, προηγμένα ομοαξονικά ηχεία με ενσωματωμένο κέρας CD 50° x 90°, τα οποία εξασφαλίζουν το ακουστικό ιδεώδες μιας πραγματικής σημειακής πηγής και, συνεπώς, εξαιρετικά ηχητικά χαρακτηριστικά ακόμη και σε μικρές αποστάσεις ακρόασης. Εκτός από αυτό, η σειρά προσφέρει υψηλό επίπεδο στιβαρότητας, ένα ολοκληρωμένο σύνολο χαρακτηριστικών και τον κομψό σχεδιασμό της LD Systems.
Παρόλο που εξακολουθεί να είναι πολύ συμπαγής και επομένως μπορεί να ενσωματωθεί απαρατήρητα στο σκηνικό σύνολο, το MON 10 A G3 αποδίδει επαρκή ηχητική πίεση για να διεκδικεί ακόμη και σε πιο δυνατές καταστάσεις ζώνης. Η ιδανική γεωμετρία διασποράς 50° x 90° για χρήση σε μόνιτορ και 90° x 50° για χρήση σε FOH τον καθιστούν ένα πολυτάλαντο που προσφέρει τη σωστή λύση για πολλές διαφορετικές εργασίες.
Τόσο το σήμα (συνδυασμός XLR/βύσμα) όσο και η σύνδεση τροφοδοσίας (συμβατή με PowerCON) μπορούν να περάσουν από βρόχο. Αυτό επιτρέπει την κομψή, τακτοποιημένη καλωδίωση σε διατάξεις πολλαπλών οθονών ή για κατανεμημένη ενίσχυση ήχου.
- Συμπαγές μόνιτορ σκηνής υψηλών επιδόσεων με κορυφαίες τεχνολογίες
- Ενισχυτής ισχύος τάξης-D με 300 W RMS/1200 W peak και 126 dB max. SPL
- Ομοαξονική σχεδίαση για πραγματική σημειακή πηγή με οδηγό HF με διάφραγμα τιτανίου 1,75"
- Γούφερ 10" με πηνίο φωνής 2,5"
- Βελτιστοποιημένο, πρακτικό διάγραμμα ακτινοβολίας χάρη στην κόρνα CD 50° x 90°
- DynX® DSP (Gen.2) για ήχο χωρίς παραμόρφωση ακόμη και στη μέγιστη ένταση
- EQ 3 ζωνών, φίλτρο Notch, 4 προεπιλογές εφαρμογής και λειτουργία καθυστέρησης
- Συμβατή επαγγελματική σύνδεση ρεύματος με βρόχο PowerCON
- Φλάντζα βάσης ηχείων 35 mm για εφαρμογές FOH
- Ανθεκτική επίστρωση πολυουρίας και μπροστινή γρίλια βαρέως τύπου
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
118 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
126 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
72 - 18000 HZ
Frequency response (-10 dB)
58 - 20000 Hz
Crossover frequency
1700 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
| The MCX 12 is a high-performance coaxial stage monitor offering various applications. Depending on the application, the design enables three set-up options: 35° angle for monitoring from short distances, 55° for longer distances, and 90° e.g. for front-fill applications at the stage edge. Due to its inconspicuous design, the MCX 12 fits harmoniously and eleganty into all surroundings. The speaker features a broad dispersion of 80°. The highly sturdy monitor convinces with its precise sound reproduction and gives musicians on stage a top-class sound experience. The flange inside the handle provides to possibility to use the MCX 12 as a PA system on a high stand. If required, the MCX 12 combines perfectly with the QLB 215 or QLB 118 X/G subwoofers. The monitor offers three Neutrik NL4 speakon connectors. Two of them are placed on the side of the high stand flange.
enclosure design for different positions (speaker stand, monitor, front fill)
- wooden enclosure with weatherresistant polurethane coating
- impregnated speaker membrane for permanent protection against moisture
- coaxialer enclosure design for homogeneous dispersion
- extremely low acoustic feedback behavior
- natural, transparent sound
- pole mount integrated in side handle
- left- and back facing connector panel
- compact dimensions und low weight
| Components |
12“ + 2“ (3“ voice coil), coaxial |
| Dispersion (h x v) |
80° conical |
| Nominal load (AES / program) |
400 / 800 W |
| Impedance |
8 ohms |
| SPL nom. (Fullspace@1W/1m) / max. SPL (at AES nominal load) |
98 / 124 dB |
| Frequency range (-6 dB) |
65 Hz – 19 kHz |
| Dimensions (W x H x D) |
485 x 345 x 430 mm |
| Weight |
20 kg |
| Connectors |
3x Speakon NL4 (2x right, 1x left) |
| Finishing |
PU coating (black) |
| Mounting threads |
2x M8 mounting thread (until 2018: 2x Variofix points M10), 1x M8 safety thread |
| Special features |
2x butterfly handle four sided, pole mount |
| Protective grille |
sturdy front grille with acoustic foam |
| Design |
low profile stage monitor with 3 possible positions (35°, 55°, 90°) |
| Protection class |
IP 44 |
|
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.