KEF T105 ΣΕΤ ΗΧΕΙΩΝ HOME CINEMA 5.1

KEF T 105 ΣΕΤ ΗΧΕΙΩΝ HOME CINEMA

Σετ Home Cinema, 2 x T101 (front), 2 x T101 (Rear),1 x T101c (Center), 1 x T2 (Sub Powered)

 With five deceptively compact model T101s as front and rear satellites as well as the centre channel, plus the discreet T-2 subwoofer, the T105 system is powerful enough to fill most normal rooms with a compellingly detailed 3D sound image. As easy to set up as they are on the eye, they make the perfect entry level surround sound system for the latest generation of flat screen TVs.

 

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΙΡΙΣΤΙΚΑ
      T101 / T101c
Design     Two-way closed box
Drive units     115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response     80Hz - 30kHz
Crossover frequency     1.7kHz
Amplifier requirements     10 - 100 W
Sensitivity (2.83V/1m)     90dB (wall mount)
87dB (floor stand mount)
Maximum output (SPL)     107dB
Impedance     8Ω
Internal volume     0.7 Litres
Dimensions
(H x W x D)     330* x 140 x 35 mm
(13.0 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode     140 x 330 x 35 mm
(5.5 x 13.0 x 1.4 in.)
Finish     Black

 
      T-2
Design     Closed box powered subwoofer
Drive units     1 x 250mm (10in.)
Frequency response     30Hz - 250Hz
Amplifier     250 Watts built-in Class-D
Maximum output (SPL)     110dB
Low pass filter variable     Fixed 250Hz, 2nd-order
Low level signal inputs     RCA phono socket
Internal volume     12.7 Litres
Power requirements     100 - 240 V ac ~ 50/60Hz
Power consumption     250VA
Dimensions
(H x W x D)     380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish     Black

# The perfect speaker solution when you want big, high definition sound from compact, easy-to-use speakers
# Only 2-1/2 inches (6.4cm) deep for unobtrusive high performance
# Perfect appearance and timbre match for Mythos XTR series front speakers
# Bipolar driver array disperses surround sound over a wide area for enveloping effects
# Two high-definition XTDD 3-1/2 inch mid/bass drivers for life-like clarity
# Wall mount bracket and vertical table support stand included

Dimensions (mounted on wall without bracket) :11-7/8" H x 6" W x 2-1/2" D | 30.1cm H x 15.2cm W x 6.4cm D
Dimensions (mounted on wall with bracket) :11-7/8" H x 6" W x 2-9/16" D | 30.1cm H x 15.2cm W x 6.5cm D
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers in a bipolar array, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :100Hz - 30kHz
Sensitivity :90dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum, sealed
Product weight (without table stand) :
Supplied accessories :Wall mount bracket, adjustable support foot for vertical shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black

General
Enclosure     Bass Reflex
Video Shielded     No
Pieces in System     5
Color     Gloss Black
Tweeter     Dome
Midrange size (inches)     ---
Woofer size (inches)     2-1/2
Woofer Composition     Composite
Woofer Surround     Rubber
Impedance (Ohms)     8
Connector Type     5-way post
Mounting Bracket Included     Keyhole
Recommended Stand Height (inches)     31-36
Parts Warranty     5 Years
Labor Warranty     5 Years
Specifications
RMS Power Range (watts)     20-125
Subwoofer RMS Power (watts)     Not Given
Dimensions
Main Speakers (inches)     6-1/2H x 3-13/16W x 4-7/8D
Center Speaker (inches)     3-15/16H x 15W x 3-7/16D
Surround Speakers (inches)     6-1/2H x 3-13/16W x 4-7/8D
Subwoofer (inches)     No Subwoofer

imensions | Metric :40" W x 4-1/4" D x 4-1/4" H: speaker only, not including bracket | 101.6 x 10.5 x 10.5 cm
Driver Complement :Three 3-1/4" BDSS drivers with Axially Aligned 3/4" pure aluminum dome tweeters; Two 3-1/4" BDSS High-output full-range drivers; Four 3" full-range high-output surround drivers
Frequency Response :60 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89dB
Recommended Associated Amplifier Power :20 – 175 watts
A/V Receiver Crossover Setting :140 Hz
Inputs :Five pairs of 5 way binding posts
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler foot
Available Finishes :Gloss Black
Warranty :5 Years
Weight | Metric :20 lbs | 9.1 kg
Enclosure :Aircraft grade extruded aluminum

Driver Complements
Satellites
Mid/Woofer     1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Center
Tweeter     1 - 3/4" Diameter (1.91cm)
Dynamic Balance composite ring radiator tweeter
Electrical
Overall Frequency
Response     85HZ - 31kHz
Lower -3dB Limit     110Hz
Upper -3dB Limit     28kHz
Nominal Impedance     8 ohms
Recommended Amplifier Power     10-125 w/channel
Efficiency     90 dB
Inputs     Gold-plated 5-way binding posts
Dimensions
Satellites
Cabinet Size     7 3/4" H x 4 1/2" W x 5 15/16" D
(19.68cm H x 11.43cm W x 15.08cm D)
Mounting Options     Included wall mount bracket; 1/4x20 threated insert
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort bass venting
Center
Cabinet Size     4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Weight     4.70 lbs. (2.13kgs)
Mounting Options     keyhole slots; .25 x 20 threaded inserts
Enclosure Type     Steel-plate reinforced curved enclosure with PowerPort Bass venting
Shipping/Other
Total Shipping Weight     20.30 lbs. (9.21kgs)
Speaker Warranty     5 years parts and labor (original purchaser)
Accessories
(comes with)    Satellite wall mount bracket

• More versatile mounting options than any other loudspeaker, with a modular, removable, switch-around base and built-in keyhole slots.
• Mounting Options: 1. Angled wall mount 2. Corner mount 3. Horizontal wall mount 4. Vertical wall mount 5. Shelf mount 6. Horizontal shelf mount 7. Use an optional articulating bracket (such as OmniMount 10.0 not included) for ceiling or swiveled wall use.
• (If you can think of any more, please let us know!)
• The OWM Series is timbre-matched to other Polk loudspeakers, so you can mix and match them to build or add to existing systems.
• Dynamic Balance® composite cone drivers are lightweight and stiff, with excellent damping qualities, for high efficiency, excellent mid-bass and low distortion even at extreme volume levels.
• Patented Dynamic Balance materials technology tunes out cone resonances before they become a part of the finished product, so you only hear the most realistic, natural audio reproduction.
• Durable, high performance fabric dome tweeters deliver clear and detailed high frequency response and excellent imaging.
• Capacitive Coupling Technology (CCT), an advanced signal-blocking technology that overcomes the usual limitations of small-enclosure loudspeakers (slim dynamics and no low frequency response), delivers extended dynamic range and enhancing deep bass response for clear, detailed musicality with little or no coloration.
• Glass-filled ABS enclosure is super-dense and acoustically inert, ensuring an extremely clean and low coloration midrange response.
• Paintable white finish blends into any decor.
• 5-way gold-plated binding posts, for the best connections, are easily accessible no matter how you mount the speaker.

• Total Pieces2

• Included Accessories
  • (1) Grille
  • (1) Removable Base

• Cabinet Warranty5 years
• Drivers Warranty5 years
• Original Purchaser OnlyYes

• Carton 1 11.25" (28.58 cm) h x 11" (27.94 cm) w x 11" (27.94 cm) d - 10.5 lbs (4.76 kg)

• Qty Included Pair
• Availability US
• Orientation
  • Vertical
  • Horizontal
• Height10" (25.4 cm)
• Width7" (17.78 cm)
• Depth4" (10.16 cm)
• Weight4 lbs (1.81 kg)
• Front Array Driver Complement
  • (1)  4.5" (11.43 cm) d (Round) - Mid/Woofer
  • (1)  1" (2.54 cm) d (Round) - Tweeter

• Total Frequency Response80 Hz → 25 kHz
• Sensitivity (1 watt @ 1 meter)89 dB
• Lower and Upper -3dB Limits100 Hz → 22 kHz

• Mounting TypeKeyhole Hanger
• Available Orientations
  • Vertical
  • Horizontal
• Mounting Location
  • Back of Speaker
  • Bottom of Speaker
  Near: Bottom, Center

• Mounting Type1/4" 20 Threaded Insert
• Available Orientations
  • Horizontal
  • Vertical
• Mounting Location
  • Back of Speaker
  • Bottom of Speaker
  Near: Bottom, Center

• Mounting TypeKeyhole Hanger
• Available OrientationsHorizontal
• Mounting LocationBack of Speaker - Near: Center

• Mounting TypeKeyhole Hanger
• Available Orientations
  • Horizontal
  • Vertical
• Mounting Location
  • Back of Speaker
  • Bottom of Speaker
  Near: Bottom, Center

• Recommended Amplifier Power Per Channel 20 watts → 100 watts

• Audio Inputs
• Speaker Inputs (1) 5-way Binding Posts - Gold-Plated