KLARK TEKNIK DN200 Eνεργό DI Box με earth lift, -5, -30dB phantom power

Καταργήθηκε

162.00 με ΦΠΑ 24%

Εξαντλημένο

CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Καταργήθηκε Καταργήθηκε Κωδικός προϊόντος: E006290 Κατηγορία:
Ενεργό D.I Box με earth link 5dB att.& 30dB.Pad Τροφοδοτείτε από phanton power The DN200 Active Stereo Direct Injection Box from Klark Teknik is a dual-channel and multi-mode stereo DI box that delivers superior connectivity and audio performance. Housed in a robust alloy case with the same form factor as the DN100 Single-Channel DI, and further […]

 

Διαβάστε περισσότερα

  • Ενεργό D.I Box με earth link
  • 5dB att.& 30dB.Pad
  • Τροφοδοτείτε από phanton power

The DN200 Active Stereo Direct Injection Box from Klark Teknik is a dual-channel and multi-mode stereo DI box that delivers superior connectivity and audio performance. Housed in a robust alloy case with the same form factor as the DN100 Single-Channel DI, and further protected by a replaceable silicon sleeve, the DN200 features inputs on pairs of XLR, TRS, and RCA sockets, plus a switchable 20 dB pad and a ground lift switch.

In addition, the DN200 can operate in Sum mode, where left and right input signals are merged and routed to both left and right outputs, or Split mode, routing the left input signal to both the left and right outputs. The DN200 supports 24 to 48V phantom-power operation.

Dual-channel active direct injection boxRugged Neutrik Combo XLR connectors featuring high-impedance DI jack inputsRCA Phono inputsIndependent phantom power for each channel for maximum reliabilitySum switch optionally routes both inputs to both outputsSplit switch optionally routes left input to both outputsGlobal 20 dB Input Pad and Earth Lift switches24 to 48V phantom-powerStackable, protective silicone rubber sleeveCompact and rugged design

Βάρος 1.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “KLARK TEKNIK DN200 Eνεργό DI Box με earth lift, -5, -30dB phantom power”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

KLARK TEKNIK DN200 Eνεργό DI Box με earth lift, -5, -30dB phantom power removeLD SYSTEMS LDI02 ΕΝΕΡΓΟ DI BOX με ΜΠΑΤΑΡΙΑ removeSTEWART ADB1 ACTIVE D.I. BOX removePALMER AUDIO TOOLS PAN04 Passive DI Box - 2 channels removeBEHRINGER DI600P High-Performance Passive Direct Injection DI Box removePALMER AUDIO TOOLS PAN02 Active DI-box remove
NameKLARK TEKNIK DN200 Eνεργό DI Box με earth lift, -5, -30dB phantom power removeLD SYSTEMS LDI02 ΕΝΕΡΓΟ DI BOX με ΜΠΑΤΑΡΙΑ removeSTEWART ADB1 ACTIVE D.I. BOX removePALMER AUDIO TOOLS PAN04 Passive DI Box - 2 channels removeBEHRINGER DI600P High-Performance Passive Direct Injection DI Box removePALMER AUDIO TOOLS PAN02 Active DI-box remove
Image
SKUE006290LDI02ADB1EPAN04E005866PAN02
Rating
Price 162.00 με ΦΠΑ 24% 58.64 με ΦΠΑ 24% 164.56 με ΦΠΑ 24% 93.00 με ΦΠΑ 24% 39.00 με ΦΠΑ 24% 68.20 με ΦΠΑ 24%
Stock

Εξαντλημένο

Μόνο 5 απομένουν σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Μόνο 2 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

AvailabilityΕξαντλημένοΜόνο 5 απομένουν σε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΜόνο 2 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
Add to cart

Διαβάστε περισσότερα

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content
  • Ενεργό D.I Box με earth link
  • 5dB att.& 30dB.Pad
  • Τροφοδοτείτε από phanton power
The DN200 Active Stereo Direct Injection Box from Klark Teknik is a dual-channel and multi-mode stereo DI box that delivers superior connectivity and audio performance. Housed in a robust alloy case with the same form factor as the DN100 Single-Channel DI, and further protected by a replaceable silicon sleeve, the DN200 features inputs on pairs of XLR, TRS, and RCA sockets, plus a switchable 20 dB pad and a ground lift switch. In addition, the DN200 can operate in Sum mode, where left and right input signals are merged and routed to both left and right outputs, or Split mode, routing the left input signal to both the left and right outputs. The DN200 supports 24 to 48V phantom-power operation. Dual-channel active direct injection boxRugged Neutrik Combo XLR connectors featuring high-impedance DI jack inputsRCA Phono inputsIndependent phantom power for each channel for maximum reliabilitySum switch optionally routes both inputs to both outputsSplit switch optionally routes left input to both outputsGlobal 20 dB Input Pad and Earth Lift switches24 to 48V phantom-powerStackable, protective silicone rubber sleeveCompact and rugged design

pdf User´s Manual

LD Systems LDI02
DI Box active

Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated),

extremely low battery consumption. Battery: 9 V block (not included).

 

Product type DI Boxes
Channels 1
Inputs 2
Input connectors 6.3 mm Jack , XLR
Max. input level + 10 / + 30 dBu dBu
Input impedance 1 M Ohm(s)
Outputs 1
THRU outputs/channel 1
Output connectors XLR
Frequency response 20 - 20.000 Hz
THD
Indicators Power
Controls ground lift , Power
Operating voltage +48 V phantom power , 9 V block
Cabinet material metal
Cabinet surface painted
Width 135 mm
Depth 128 mm
Height 53 mm
Weight 0,645 kg

The Stewart ADB-1 is a single channel active direct box that allows an unbalanced source to
directly feed a balanced input. Musical instruments, tape recorders, VCRs and sound projectors
can be run "direct" to the mixing console, avoiding unnecessary degradation of sound quality.
The ADB-1 operates on either phantom power or a 9-volt battery.

FEATURES:
Flat response
Low distortion
Low noise
Wide dynamic range
No transformer
RF protection on input and output
Switchable ground isolation
Flush mounted slide switches

2-channel passive DI box for line and loudspeaker levels. PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.

Specifications

  • No. of channels: 2
  • Passive/Actibe: Passive
  • Transformer balanced: Yes
  • Attenuator: -30 dB
  • Input/Output Gain: -20 dB
  • Ground lift switch: Yes
  • Max Input Level: +54 dBu
  • Max Output Level: +4 dBu
  • Frequency Range  2K Source Imp. -1dB: 10 Hz - 40 kHz
  • Input Impedance  60Hz: 60 kΩ
  • Nom. Output Impedance: 600 Ω
  • Housing: Steel
  • Dimension: 110 x 110 x 45 mm

Behringer DI-600P High-Performance Passive Direct Injection Box

Introducing the Ultra-Compact DI-Boxes from BEHRINGER

There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal.

The DI600P lets you connect instruments or amplifier outputs of up to 3,000 Watts. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies.

This is the sort of medicine that?ll cure headaches in your studio or on stage.

It often happens that you want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. The direct connection between audio equipment can quickly turn out to be a real challenge: technical problems crop up that can affect the signal.

Hook Your Guitar or Amp Up to the PA

Be ready for your next gig with the Behringer Ultra-DI DI600P direct box. Designed to send instrument or amplifier signals to the main mixing board, the DI600P is a high-performance passive DI is a useful tool in any gig rig or studio. Dual 1/4" TS jacks are wired in parallel let you plug your instrument into one and use the other as an output to your amp. The balanced XLR mic-level output feeds your mixer a clean and super-flat signal that is true to the source. Sweetwater knows that grounding issues and hum can be a problem at live gigs. The DI600P sports a ground lift switch to kill unwanted ground loops and hum. It also has a filter switch for optimal guitar tone and an instrument/amp switch with a 30dB input level drop. The Behringer Ultra-DI DI600P direct box is an extremely useful tool for any stage rig!

Behringer Ultra-DI DI600P Direct Box Features:

  • Compact, high-performance passive direct box
  • Jack input 1/4" TS in and parallel out
  • Gold-plated XLR output / impedance balanced
  • Super-flat frequency output for uncolored sound
  • Switchable filter that optimizes the DI for guitars
  • Instrument/Amp switch lowers the input level 30dB for feeding amplifiers into the DI
  • Instruments or amplifier outputs with up to 3,000 watts can be connected directly
  • Offers impedance and signal matching of instruments to mixers
  • Perfect for stage and studio use
  • Ground lift switch eliminates typical ground loop problems
  • Rugged metal case can take the rigors of the road

Get your signal to the board with Behringer's Ultra-DI DI600P direct box!

Tech Specs
  • Type: Passive DI Box
  • Channels: 1
  • Ground Lift: Yes
  • Inputs: 1 x 1/4"
  • Outputs: 1 x 1/4“, 1 x XLR
  • Height: 1.4"
  • Width: 3.75"
  • Depth: 5"
  • Weight: 0.66 lbs.
  • Manufacturer Part Number: DI600P

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.
Weight1.00 kg0.70 kg0.50 kg0.47 kg0.30 kg0.31 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.00 kg
Βάρος 0.70 kg
Βάρος 0.50 kg
Βάρος 0.47 kg
Βάρος 0.30 kg
Βάρος 0.31 kg