Content |
Data sheet [697,2 KB]
Battery disposal information [77,1 KB]
Ένα απο τα κορυφαία μικρόφωνα στην κατηγορία του. Η υπερκαρδιοειδής κάψα του είναι ιδανική για τη μείωση ανεπιθύμητων μικροφωνισμών, διαθέτει μεγάλο φάσμα συχνοτήτων, χαμηλή παραμόρφωση στα υψηλά επίπεδα πίεσης και με αντικραδασμική κατασκευή κάψας για μικρότερο δυνατό θόρυβο χρήσης. Ιδανικό για στούντιο ή ζωντανή χρήση. Διατίθεται και με διακόπτη On/Off
Top vocal microphones. These low-feedback dynamic supercardioid vocal
microphones feature a broad frequency spectrum, low distortion at high
sound pressure levels, and "shockproof" capsule mounting for all demanding
stage and studio applications. Also available with ON/OFF switch.
- Capsule type: Dynamic
- Polar pattern: Supercardioid
- Frequency response: (Hz) 50 - 16000
- Sensitvity (dBV/pa): -54 (2.0 mv/pa)
- Rated Impedance (ohm): 300
- Dimensions (mm) 52 x 165
- Max.SPL (dB) 134 dB (THD
| Δυναμικό μικρόφωνο για live και studio εφαρμογές της AKG. Σουπερκαρδιοειδές, απόκριση συχνοτήτων 70-20.000Hz, ευαισθησία 2,6mV/Pa
ΜΕ ΕΓΓΥΗΣΗ ΕΛΛΗΝΙΚΗΣ ΑΝΤΙΠΡΟΣΩΠΕΙΑΣ
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- Integrated 80 Hz High-Pass Filter
- Integrated Hum-Compensating Coil
The AKG D7 is a reference handheld dynamic vocal microphone designed to capture vocals and instruments with condenser-like sound for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated dual-layer Varimotion diaphragm exhibits a supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high gain before feedback and reduced stage bleed through the mic. Handling noise is minimized by the mechano-pneumatic capsule suspension and an integrated 80 Hz high-pass filter.
Thanks to a 70 Hz to 20 kHz frequency response and a maximum SPL of 147 dB, the D7 delivers detailed sound even on the loudest sources. A hum-compensating coil is incorporated to help reduce interference from electrical devices and to ensure that your captured sound comes through with minimal noise.
In addition, the heavy-duty die-cast chassis with a dent-resistant grille is built rugged to withstand the rigors of daily use. An XLR connector utilizing gold-plated pins ensures signal transfer with maximum conductivity. A padded zip case, SA 61 stand adapter, and a replacement inner windscreen are included.
Dual-Thickness Varimotion Diaphragm
Provides a subtle and open sound in all frequency ranges
Feedback Suppression
The laminate diaphragm material damps critical resonance peaks
Integrated Hum-Compensating Coil
Provides a crisp and a cleaner sound
Precision Metal Dust Filter
Protects the capsule from sound-changing pollution
Mechano-Pneumatic Suspension
Effectively eliminates unwanted handling noises
Microphone
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
Dynamic |
Polar Pattern |
Supercardioid |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
80 Hz |
Performance
Frequency Range |
70 Hz to 20 kHz |
Maximum SPL |
147 dB SPL |
Impedance |
600 Ohms |
Load Impedance |
2000 Ohms |
Sensitivity |
2.6 mV/Pa |
Signal-to-Noise Ratio |
76 dB A-Weighted |
Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
Output Connectors |
1 x XLR 3-Pin |
Physical
Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
Weight |
11.29 oz / 320 g |
|
AKG P3s Κατάλληλο για χρήση σε live. Δυναμικό, καρδιοειδές μικρόφωνο με διακόπτη. Μεταλλικό σώμα. Διαθέτει ελαστικό μανταλάκι και τσάντα μεταφοράς. Απόκριση συχνότητας 40 to 18,000 Hz Ευαισθησία 2.5mV/Pa, Max. SPL 144 dB SPL.
The P 3 S microphone is ideal for backing vocals, guitar, wind instruments and many other applications. It has a metal case and wire mesh grill to ensure exceptional ruggedness.
Key Features:
- Rugged performance microphone designed for backing vocals and instruments
- Rugged wire mesh cap with internal windscreen
- Die-cast metal body
- Complete with stand adapter and zip bag
- On/Off switch
Specifications:
- Polar pattern Cardioid
- Frequency range 40 to 18,000 Hz
- Sensitivity 2.5mV/Pa
- Max. SPL 144 dB SPL
- Recommended load impedance >=2,000 ohms
|
The first Neumann microphone with a dynamic capsule. Functionally optimized design
specifically for the broadcast field, featuring integrated pop protection, suppression of
structure-borne noise and a hypercardioid directional characteristic.
Emotion conveyed with technical perfection. This is the ideal which the Neumann
microphones in the Broadcast Line have been designed to fulfill. The fine-tuning to the
requirements of professional broadcast studios and the individual, functionally optimized
design* ensure that these are microphones of character.
The BCM 705 is Neumann?s first dynamic microphone. The housing and headgrille are
identical to those of the BCM 104; only the green logo indicates that this is something new
from Neumann. The principle of reduction to the essentials can be seen in the dynamic
capsule with a hypercardioid directional characteristic, specifically designed for speech
reproduction at close range. Multi-level isolation from structure-borne noise ensures operation
free of interference, even in a lively studio environment.
Mechanical Features
The microphone headgrille twists off easily for quick cleaning. Neumann offers optional,
color-coded headgrilles so that, for reasons of hygiene, each announcer can use his or her
individual headgrille. Iin front of the capsule, mounted on a frame holder, a fine gauze serves
as a built-in popscreen.
The microphones of the Broadcast Line have an elastic mount against structure-borne noise,
that is compatible with standard broadcast-segment microphone arms.
Acoustic features
The frequency response has a light treble boost, in the region from 2 kHz to 9 kHz, aiding the
speech intelligibility. The bass frequency response is designed to compensate for the overemphasis
of the bass caused by the proximity effect.
The integrated Pop Screen
A pop screen not only prevents the occurrence of plosive pop noises in vocal recordings, but also
efficiently prevents unwanted particles, from respiratory moisture, nicotine, to food remnants, from
settling on the diaphragm. The pop screen can be removed for cleaning without the use of tools.
Mounting
The preferred mode of operation is to suspend the BCM 104 or BCM 705 from a standard studio
boom arm.
A thread adapter to fit different connector threads is included. In order to provide protection from
structure-borne noise, both the capsule and the microphone in its mount are elastically suspended.
The optional SG 5 swivel mount allows additional angling of the microphone by +/-90 degrees.
FEATURES:
Dynamic capsule
Hypercardioid directional characteristic
Characteristic, functionally optimized design*
Integrated, neutral pop protection
Integrated elastic suspension
Individual headgrilles for different users
Colored rings to identify the replacement headgrilles
Easy removal and cleaning of microphone headgrille (with bayonet mount)
Mechanical compatibility with standard studio boom arms
Multi-level isolation from structure-borne noise
No power supply required
APPLICATION HINTS:
Announcer's mic for broadcasting and studio
This is just one of the most common applications. We recommend
additional experimentation to gain maximum use from this microphone.
TECHNICAL DATA:
Acoustical operating principle Pressure gradient transducer
Directional pattern Hypercardioid
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 10 kohm 1,7 mV/Pa = ?55,4 dB ± 1 dB
Rated impedance 200 ohms
Rated load impedance >= 10,000 ohms
Equivalent SPL CCIR 468-3 32 dB
Equivalent SPL DIN/IEC 651 18 dB-A
S/N ratio CCIR 468-3 62 dB
S/N ratio DIN/IEC 651 76 dB
Weight 500 g
Diameter 64 mm
Length 85 mm
Height (without suspension) 110 mm
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
Transducer | (Moving Coil, with Neodymium Magnet) Dynamic | Polar Pattern | Supercardioid | Frequency Response | 50 Hz - 16 kHz | Maximum Input Sound Level | not specified by manufacturer | Power Requirements | None Dynamic, Requires No Phantom or Battery Power | Output Impedance | 150 Ohms (290 Ohms Actual) | Output Connectors | XLR-3 Type | Dimensions | 6.375 x 2" (162 x 51mm) LxDiameter | Weight | 9.92 oz. (278 g) | | Βαλίτσα που περιλαμβάνει 3 δυναμικά μικρόφωνα καρδιοειδούς πολικού διαγράμματος με διακόπτη.
Κατασκευαστής |
BEHRINGER |
Application |
Portable PA |
Τύπος Μικροφώνου |
Ενσύρματο |
Κάψα Μικροφώνου |
Δυναμική |
Κατηγορία Μικρόφώνου |
Χειρός |
Πολικό Διάγραμμα |
Καρδιοειδές |
Απόκριση Συχνότητας |
80-15000 |
Ευαισθησία (mV / Pa) |
2,5 |
Σειρά |
ULTRAVOICE series |
Μοντέλο |
XM1800S |
Part Number |
000-199 |
Εγγύηση |
1 Χρόνος Εγγύηση |
Product Features:
Dynamic vocal and instrument microphone with on/off switch for excellent studio and live performance
Ultra-wide frequency response for brilliant and transparent sound
Extremely high signal output lets your voice cut through
Cardioid characteristic minimizes background noise and feedback
Convenient on/off switch to mute during breaks
Integrated spherical wind and pop noise filter
Microphone stand adapter and impact-resistant carrying case included
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
The Behringer XM1800S is a set of three dynamic microphones and a hard case, perfect for starting your recording or live setup. Dynamic microphones are an essential for live performance and recording. Thanks to Behringer's XM1800S Ultravoice Dynamic Microphone, 3 Pack, you'll have a set of versatile microphones which serve to provide you with excellent, high quality, results, night after night. Their super-cardioid polar pattern design ensures a tight and focused sound, with minimal bleed from off-axis sources. This is especially useful for ensuring vocals cut through dense mixes or if the vocalist plays an instrument simultaneously.
The bundle includes a protected, padded, hard-case, built to withstand the hardships of continued use and touring. As well as this, there's three microphone stand adapters. Thanks to Behringer you'll be presented with a premium quality package, ideal for a wide range of applications.
The ideal choice for live sound
Dynamic microphones are designed to be robust, durable and resitant to damage, and moisture,and are able to withstand the most powerful of voices. The XM1800s' super-cardioid design provides you with a tight sound. This is ideal for a focused capture, whilst rejecting ambience from unwanted, off-axis sources. Because of the tight pick up pattern the XM1800S are an excellent choice to use on musicians who play an instrument whilst singing. Behringer make your job easier, ensuring that every voice is heard and resonates with the listener.
A great all round package
As well as the three dynamic XM1800S mics, the pack also includes an impact-resistant carry case, microphone clips and stand adapters. Behringer have included these accessories to provide the key essentials you'll need for transporting and setting up your microphones. The impact-resistant carry case is designed to offer added durability and a safe way of transporting your microphones, minimising any damage.
Features
- Dynamic vocal and instrument microphone with on/off switch for excellent studio and live performance
- Ultra-wide frequency response for brilliant and transparent sound
- Extremely high signal output lets your voice cut through
- Cardioid characteristic minimizes background noise and feedback
- Convenient on/off switch to mute during breaks
- Integrated spherical wind and pop noise filter
- Microphone stand adapter and impact-resistant carrying case included
- Conceived and designed by Behringer Germany
Specifications
- Type: Cardioid Dynamic Microphone
- Impedance: 600 ohms
- Sensitivity: -52dBV (0 dBV = 1V/Pa), 2.5mV/Pa
- Frequency Response: 80Hz - 15kHz
- Connector: Gold-Plated XLR
- Weight: Approx. 230g
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.