Content |
The new Audio 3-stage CLASS-H SMPS amplifiers incorporate all the features to meet all your needs, whether youʼre starting a P.A. amplifier project from scratch or just need to upgrade your present sound reinforcement equipment. In the amps, youʼll find 2 and 4 channel models, all offering high power levels at low distortion in the range 1.5 to 6 kW, yet weighing around 8.6 kg and only 30 cm deep.
- Model Name: SP6K
- Output Power 1 kHz, 500
- Crosstalk (20 Hz - 20 kHz): > 75 dB
- Voltage Gain (selectable): 26 / 32 / 38 dB
- Input Sensitivity: 5.0 / 2.5 / 1.3 V
- Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL (Inteligent Clip Limiting), PMS (Power Management System), SSP (SOA Sentry Protection)
- Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch
- Indicators: Signal, Temperature, ICL (Inteligent Clip Limiting), PMS (Power Management System)
- Connectors:
- Input: 2 x XLR
- Line Output: 2 x XLR
- Speaker Output: 2 x Speakon
- Power Supply: 230 V - 50 Hz
- Dimensions (W x H x D): 483 × 88.9 × 310 mm
|
Power Output Level R-150 PLUS
STEREO
8ohm(T.H.D 0.05%) 50W+50W
4ohm(T.H.D 0.05%) 75W+75W
BRIDGED MONO
8ohm(T.H.D 0.05%) 50W
8ohm(T.H.D 0.5%) 170W
Frequency Response 20Hz- 20kHz, ±0.5dB
Convection Cooled
SoftStart Protection System
Balanced 10kΩ@0.775V Inputs
|
The E Series is a range of lightweight, high-power switch mode amplifiers designed to the highest standards of reliability and sound quality. Developed for the touring market, E Series retain the sonic integrity of the benchmark MC and T Series amplifiers, without the physical weight.
The switch mode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new, sophisticated MC² Audio 'intelligent' limiter. The E15, E25, E45 and E4-75 feature MC² Audioʼs proprietary current driven output stages for ultra-high definition sound, delivered over the entire audio bandwidth.
The E90 and the E100 are Class D amplifiers designed to meet the demands for higher power with increased efficiency whilst still maintaining the renowned MC² Audio sonic qualities and unsurpassed reliability.
All MC² Audio products are covered by a 5 year warranty.
Number of Channels: 2
Frequency Response:
20Hz to 20kHz
(+/- 0.3dB)
Output Power: (per channel)
8 ohms 1250W
4 ohms 2500W
2 ohms 4200W
Output Power: (bridged)
8 ohms 5000W
4 ohms 8400W
THD%: (@1dB below max output)
@ 1kHz |
Επαγγελματικός ενισχυτής 2x2000W RMS @ 4Ω, 2x2500W RMS @2Ω, 2x1000W @ 100V, bridged (mono) 2400W RMS @ 4Ω, 3600W/100V. Διαθέτει εισόδους 3-pin XLR, jack 6,3mm (balanced), εξόδους speakon και κλέμα. Επίσης διαθέτει πάνελ ρυθμίσεων με dip switches 10 θέσεων (clip limiter, filters, stereo/parallel inputs, bridge mode). Προστασίες turn on/off muting, triac crowbar σε κάθε κανάλι, σταθερή απόδοση ανεξαρτήτως φορτίου. 3U/19" rackmount. Διαστάσεις (HxWxD) 133x483x400mm - 33,1kg.
Χαρακτηριστικά
Ισχύς (Stereo Mode):
- 2x1050W @ 8Ohm (FTC 20Hz- 20kHz, 0,1%THD)
- 2x1100W @ 8Ohm (EIA 1kHz, 0,1%THD)
- 2x1600W @ 4Ohm (FTC 20Hz- 20kHz, 0,1%THD)
- 2x2000W @ 4Ohm (EIA 1kHz, 1%THD)
- 2x2500W @ 2Ohm (EIA 1kHz, 1%THD)
- 2x2500W @ 70V (EIA 1kHz, 1%THD)
- 2x1000W @ 100V (EIA 1kHz, 1%THD)
Ισχύς (Bridge Mode):
- 3200W @ 8Ohm (FTC 20Hz- 20kHz, 0,1%THD)
- 3600W @ 8Ohm (EIA 1kHz, 0,1%THD)
- 5000W @ 4Ohm (EIA 1kHz, 1%THD)
- 5000W @ 70V (EIA 1kHz, 1%THD)
- 3600W @ 100V (EIA 1kHz, 1%THD)
Signal to Noise, 20Hz-20kHz, 8Ohms: >-100dB
Ευαισθησία εισόδου @ 8Ohms: 1,42V (+5,3 dBu)
Voltage Gain @8Ohms: 64x (36dB)
Output Circuitry: 3-tier Class H
Απαιτήσεις ισχύος (230V)
- 1/8 power pink noise at 4 ohms: 7A
- 1/3 power pink noise at 4 ohms: 13,5A
Παραμόρφωση (SMPTE-IM): |
Επαγγελματικός ενισχυτής 2x2000W RMS @ 4Ω, 2x2500W RMS @2Ω,
2x1000W @ 100V, bridged (mono) 2400W RMS @ 4Ω, 3600W/100V.
Διαθέτει εισόδους 3‐pin XLR, jack 6,3mm (balanced), εξόδους speakon
και κλέμα. Επίσης διαθέτει πάνελ ρυθμίσεων με dip switches 10 θέσεων
(clip limiter, filters, stereo/parallel inputs, bridge mode). Προστασίες
turn on/off muting, triac crowbar σε κάθε κανάλι, σταθερή απόδοση
ανεξαρτήτως φορτίου. 3U/19" rackmount. Διαστάσεις (HxWxD)
133x483x400mm ‐ 33,1kg.
|
Τελικός ενισχυτής, ισχύος 2x 1150 Watt/8Ω, 2x1950 Watt/4Ω, και 2x2200 Watt/2Ω.
Διαθέτει high&low pass filter, fan ψύξης, θερμική προστασία και θύρες συνδέσεως:
XLR-3pin, Euro block, RJ-45, data&speakon. Βάρος: 14 kg. Διαστάσεις: 48x8.8x44.6 cm-2U rack space.
Model T4n
Product Type Power Amplifier
Output Power (W) 1kHz THD+N=1% (120V)
2Ω per channel 2200
4Ω per channel 1950
8Ω per channel 1150
4Ω bridge 4400
8Ω bridge 3900
Output Power (W) 1kHz 20mS burst (120V)
2Ω per channel 2900
4Ω per channel 1950
8Ω per channel 1150
4Ω bridge 5800
8Ω bridge 3900
SN ratio (20Hz-20kHz) 106dB
THD+N 20Hz-20kHz, Half Power RL-4Ω, 8Ω
Intermodulation Distortion 60Hz: 7kHz, 4:1, Half Power 0.1%
Frequency response RL=8Ω,Po=1W,HPF=OFF 20Hz-20kHz (Max) 0dB
Frequency response RL=8Ω,Po=1W,HPF=OFF 20Hz-20kHz (TYP) 0dB
Frequency response RL=8Ω,Po=1W,HPF=OFF 20Hz-20kHz (MIN) 6dB
Channel Separation (Half Power RL=8Ω,1kHz Att. max input 600Ω shunt) 70dB
Residual Noise Att,min 20Hz-20kHz(DIN AUDIO) -70dBu
Damping factorRL=8Ω 1kHz 800
Voltage Gain Att.max 26dB
Maximum Input Voltage +24dBu
Input Impedence 20kΩ (balance) 10kΩ (unbalance)
Controls Specifications
Front Panel POWER switch(push on/push off) attenuator (31 position) x2
Rear Panel MODE switch (STEREO/BRIDGE/PARALLEL) X1; HPF switch (20Hz/OFF 12dB/oct) x1; AMP ID switch (6PDIP)x1
Connectors Specifications
Input XLR-3-31 type/ch; Euroblock connector (balance)/ch
Output SPEAKON/ch, 5way biding postx1
Date Port RJ45x2
Indicators Specifications
Power/Standby x1 (Green/Orange)
Remote x1 (Green)
Protection x1 (Red)
Temp x1 (Red) heatsink temp 85°C
Signal x2 (Green)
Mute x2 (Red)
Clip/Limit x2 (Red)
Load protection POWER switch on/off mute; DC-fault: power supply shutdown / do not return automatically
Cooling Variable-speed fan: x2
Power requirements 120V/60Hz
Weight 14.0 kg
Dimensions (W x H x D) 480 x 88 x 456mm (2U)
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.