| Content | The MAILA COL full-range column module makes MAILA truly versatile. With its 4x 6.5'' woofers, the elegant column element not only provides an extended low-mid range, but also includes a 4-channel DSP amplifier with 2.5 kW total power, which drives both the column itself and the MAILA SAT satellites.
In this way, MAILA sets with column module can not only be used as a ground stack variant, but also as a flown array consisting of MAILA COL and up to eight MAILA SAT - especially useful for festivals and fixed installations. In addition, as with a classic line array, users can select different subwoofer arrangements and adapt them to the sound reinforcement requirements on site.
On the ground, the use of MAILA COL provides a further advantage: the interconnected column module allows ground stack sound setups that are significantly higher (up to 3.4 metres) than conventional systems and, with its greater throw, also enables uniform sound coverage in the far field.
With LogoLink®, LD Systems has added another innovation to MAILA. Via the free MAILA app (iPadOS), every MAILA system can be quickly, easily and precisely adjusted and wirelessly supplied with software updates. Once connected, the app automatically recognises the existing MAILA components and enables the system to be set up quickly and easily - including calculation of the SAT angles - in the run-up to an event. The highlight: the wireless antennas are invisibly integrated into the LD logo of the MAILA COL.
Product type
MAILA Column
Low/mid driver dimensions
4 x 6.5 "
Woofer voice coil (mm)
50 mm
System Power (RMS)
2500 W
Frequency response (-6dB)
105 Hz - 500 Hz
Max. SPL Peak (Pink noise)
130 dB (fullspace @1m, Crastfactor 4)
Max. SPL Peak (Sine burst)
125.4 dB (fullspace @1m, 10% THD)
Max. SPL Avarage (Sine burst)
122 dB (100 Hz - 2 kHz, fullspace @1m, 10% THD)
Protection circuits
limiter, over-current, thermal overload
Input impedance
20000 Ohm(s)
Controls
Rotary/push encoder
Indicators
Indication LED, LC display, Limit, Power, Protect, Signal
Line input connectors
XLR
Line output connectors
XLR
Speaker output connections
SmartLink+®
Wireless Connectivity
LogoLink® for App Control
Power consumption (max.)
800 W
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Operating Temperature
0 - 40 °C
Relative Humidity
< 80 %, not condensing
Cabinet material
Die-cast aluminium
Cabinet surface
Powder-coated
Cabinet construction
Bass Reflex
Mounting
3 x M10, 4 x Pin, EasyMount+®
Bit depth AD/DA converter
24 bit
Sampling frequency
48 kHz
|
Ηχείο εξωτερικού χώρου, επιδαπέδιο, αδιάβροχο (με προδιαγραφές IPx4, IPx3). Με μετ/στή γραμμής 100/70V, 87 dΒ, απόκριση συχνότητας 100 -8.000Ηz, μεγάφωνο διπλού κώνου 12cm. Ιδανικό για κήπους, εξοχικά, ξενοδοχεία.
| SPECIFICATION |
|
|---|
| ENCLOSURE | :BASS-REFLEX TYPE | | RATED INPUT | :30W | | RATED IMPEDANCE | :330ohms(30W), 670ohms(15W), 1kohms(10W), 2kohms(5W),3.3kohms(3W) | | IMPEDANCE SETTING | :SCREW TERMINAL | | SOUND PRESSURE LEVEL | :87dB(1m/1W) | | FREQUENCY RESPONSE | :100-8000Hz | | SPEAKER UNIT | :12cm CONE-TYPE | | WATER RESISTANCE | :IP-X4 | | INPUT CONNECTOR | :PUSH-IN CONNECTOR or SCREW TERMINAL | | APPLICABLE CABLE | :SOLID COPPER WIRE 0.9-1.6mm TWISTED COPPER WIRE 0.75-2.5mm | | FINISH | :SPEAKER COVER, BASE/ FRP RESIN SPEAKER PANEL/ ABS RESIN | | DIMENSIONS | :270 x 335 mm | | WEIGHT | 2.4kg |
|
JBL VRX915M 15'' 2-way 800W RMS Stage Monitor
Key Features :
Compact and low-profile for minimal obstruction of audience sightlines
50 x 90 nominal coverage
Bi-amplified or full-range passive operation
Differential Drive woofer with neodymium magnet for high power capacity and very light weight
4" (voice coil) diameter compression driver with neodymium magnet
Specifications:
|
Frequency Range
|
:
|
60 Hz - 20 kHz
| |
Frequency Response
|
:
|
70 Hz - 20 kHz
| |
Coverage Pattern
|
:
|
50 x 90 nominal
| |
Crossover Modes
|
:
|
Passive / Bi-amp
| |
Crossover Frequency
|
:
|
1.1 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive Full-Range 800 W / 1600 W / 3200W, 2 hrs1 Passive Full-Range 600 W / 1200 W / 2400W, 100 hrs
| |
System Maximum SPL
|
:
|
127 dB SPL continuous (133 dB SPL peak)
| |
System Sensitivity (1w @ 1m
|
:
|
98 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2265H 380 mm (15 in) Differential Drive?? woofer 8 Ohms
| |
HF Driver
|
|
1 x JBL 2452H, 100 mm (4.0 inch) diameter voice coil, 38 mm (1.5 inch) exit, neodymium magnet compression driver 8 Ohms
| |
Nominal Impedance
|
:
|
8 ohms
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
Symmetrical stage monitor, 15/18 mm, plywood
| |
Finish
|
:
|
Black DuraFlex finish
| |
Grille
|
:
|
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing
| |
Input Connectors
|
:
|
Neutrik Speakon NL-4 (x2), one on each end
| |
Dimensions (H x W x D)
|
:
|
629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75" stage height)
| |
Net Weight
|
:
|
21 kg (46.0 lb)
|
| Features
* 2-way bass reflex active speaker system
* Built-in high power amplifier 600W
* SD/USB Multimedia player with display
* Bluetooth receiver for audio streaming
* High-efficiency 12" woofer
* Piëzo horn for high/mid-range
* 1x XLR/6.35mm jack combi microphone input
* 1x 6.35mm jack microphone input with echo
* Trapezoidal enclosure with metal corners
* Line in/output RCA
* Bass treble and master control
* Robust metal grille
* Recessed handles
* Tophat 35mm
Specifications
* Select the supplied features: The item has a speaker pole mount
* Which playback options are available?: Bluetooth SD-Card USB
* Input Connections - can pick multiple: 6.3 mm jack RCA SD Card slot USB XLR (3-pin)
* Output Connections - can pick multiple: RCA
* Output power:Max: 600W
* Tweeter type: Piezo
* Amount of tweeters: 1
* Diameter woofer: 12"
* Amount of woofers: 1
* SPL max: 110dB
* Weight (kg): 13.3000 |
The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection. Connections are dual Neutrik Speakon and 1/4" jacks. With professional features, excellent sonic performance, and great value, Yamaha Club Concert Series loudspeakers deliver premium quality night after night.
The CW118V enclosure houses a powerful cast-frame 18" woofer with a frequency response of 30Hz - 2kHz. 600W program handling, 1,200W peak. Sensitivity: 96dB. 22“W x 32“H x 25“D. 71 lbs.
Yamaha CW118V 18" Club Concert Series Subwoofer Speaker Features:
- Tough, paintable exterior coating
- Cast-frame 18" woofer
- Frequency response of 30Hz-2kHz (-10dB)
- 600W program handling/1,200W peak
- Sensitivity: 96dB
- 22“W x 32“H x 25“D
|
- Built-in amplifier with crossover
- 12" (300mm) extremely powerful mid-low woofer
- Line and mic input with bass and treble controls
- Line output allows daisy chaining of additional speakers
- High power dynamic compression driver horn
- Wide dispersion horn
- Stand mounting with 35mm pole socket
- ABS impact resistant lightweight system
- Input connector for microphones
- Volume control for the microphone
- Volume control for the line input
- Volume control for the output
- Output connector to a second box or amplifier (line level)
- Line input connector for the audio input source e.g. mixer, CD player, etc.
- Power Max: 600W
- Power RMS: 300W
- Woofer: 12"
- Horn: High Compression Dynamic Driver
- SPL Peak: 122dB
- Frequency response: 50Hz - 18kHz
- Dimensions: 300 x 350 x 580mm
- Weight: 13.1kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.