Content |
The ultra compact MAUI 5 weighs in at less than 11 kg while delivering 800 watts of peak power and a maximum SPL of 120 dB. Providing both sound reinforcement with extended coverage and feedback resistant monitoring the subwoofer base and 3-piece column system assembles in seconds with custom multipin connectors. The junior member of the MAUI family is most easily portable and fits onto any car seat.
The vented 8" subwoofer also houses the system's Class D amplification with overcurrent, short circuit and thermal protection, LD Systems' proprietary LECC digital processing and a 4-channel mixer. Featuring Bluetooth© technology for wireless streaming and microphone, line level and hi-Z inputs which can be used simultaneously the MAUI 5 lets you connect a wide variety of sources including music players and instruments such as keyboards or guitars. Individual level controls, subwoofer and master volumes plus high shelf filtering for room correction enable a perfectly balanced performance.
- Item Number: LDMAUI5
- Product Type: complete PA system
- Type: active
- Colour: black
- Max. SPL (continuous): 114 dB
- Max. SPL (peak): 120 dB
- Frequency Response: 50 - 20,000 Hz
- Dispersion Angle (H x V): 120° x 20°
- Total Height: 1985 mm
- Weight: 10.9 kg
- Other Features: DSP-based signal processing
- Woofer characteristics
- Woofer Size: 1 x 8“
- Woofer Size: 1 x 203.2 mm
- Woofer Magnet: ferrite
- Woofer Brand: custom-made
- Woofer Voice Coil: 2“
- Woofer Voice Coil: 50.8 mm
- Cabinet Type: bass reflex
- Cabinet Material: ABS
- Subwoofer Width: 305 mm
- Subwoofer Height: 405 mm
- Subwoofer Depth: 395 mm
- Mid/Hi System
- Midrange Size: 4 x 3“
- Midrange Size: 4 x 76.2 mm
- Midrange Magnet: neodymium
- Midrange Brand: custom-made
- Midrange Voice Coil: 1“
- Midrange Voice Coil: 25.4 mm
- Mid/Hi System Impedance: 4 ohm
- Speaker Inputs: 1
- Speaker Input Connections: custom-made multi-pin
- Mid/Hi System Cabinet Type: closed
- Mid/Hi System Cabinet Material: ABS
- Mid/Hi System Cabinet Surface:
- Mid/Hi System Width: 82 mm
- Mid/Hi System Height: 535 mm
- Mid/Hi System Depth: 105 mm
- Amplifier Module (integrated in subwoofer)
- Amplifier: class D
- Amplifier Power System (RMS) 200 W
- Amplifier Power System (peak): 800 W
- Protection Circuits: DSP-based multiband limiter, overvoltage, short circuit, overcurrent
- Cooling System: convection
- Controls: Sub Level, MP3/Hi-Z Level, Main Level, Line Level, Mic Level, BT Level, BT Pairing Button
- Display Elements: Signal, On, Limit, Protect
- Power Supply: switching power supply
- Operating Voltage: 100 V AC - 120 V AC / 50 - 60 Hz, 200 V AC - 240 V AC, 50 - 60 Hz (automatic adjustment)
- Line Inputs: 2 x stereo
- Line Input Connectors: XLR, 6.3 mm jack
- Mic Inputs: 1
- Mic Input Connectors: XLR, 6.3 mm jack
- MP3 Inputs: 1
- MP3 Input Connectors: 3.5 mm jack
- Hi-Z Inputs: 1
- Hi-Z Input Connectors: 6.3 mm jack
- Speaker Outputs: 1
- Speaker Output Connections: custom-made multi-pin
- DSP Features
- Word Length AD / DA Converter: 24 / 24 Bit
- Internal Sampling Frequency: 48 kHz
|
Reloop's Active PA Set stands for mobile sound quality. The heart of the entire independent PA system is the massive 600 watt subwoofer module which in addition to a 38 cm speaker also accommodates a perfectly modulated final amplifier including limiter and diplexer. The 'highlights' of the Reloop Active PA system are the two 150 watt satellites.
features:
- 600 watt RMS high-end active subwoofer satellite combination
- Set consists of:
1 x 300 watt RMS high-end active subwoofer
2 x 150 watt RMS high-end active satellites
2 x Aluminium loudspeaker stands
2 x PA professional speaker cables
1 x line cord
technical data:
Subwoofer:
- Type: active bandpass subwoofer
- Frequency range: 35 Hz - 250 Hz
- Acoustic pressure: 129 dB
- Speaker: 38 cm (15“) "Long-Throw" woofer
- Active electronic filter
- Integrated diplexer
- Opto limiter
- Dynaclip protective system
- Transportation wheels
- Carrying handles
- Inputs: 6.3 mm jack, XLR
- Outputs: PA professional speaker cables
- Dimensions: 447 x 542 x 640 mm
- Weight: 48.5 kg
Satellites:
- Type: active 2-way system
- Frequency range: 100 Hz - 18 kHz
- Impedance: 4 ohm
- Acoustic pressure: 119 dB
- Speaker: 20.3 cm (8“) mid/low-frequency speaker, 2.54 cm (1“) tweeter
- Connections: PA professional speaker cable
- Dynamic protective system
- Dimensions: 272.5 x 420 x 250 mm
- Weight: 10 kg |
User´s Manual
LD Systems MAUI 28 G2 W
Compact Column A System with Mixer and Bluetooth white
- All-in-one column speaker for PA and monitor applications
- 2,000 watts peak Class-D system power offer high performance with a low weight
- Powerful bass reproduction with 2 x 8" woofers
- Balanced mids thanks to the 16 x 3" full-range speakers
- Precise and silky highs with 2 x 1" high-frequency drivers
- Increased range and wider coverage through the array arrangement
- Homogeneous dispersion pattern through a BEM-optimised tweeter wave guide
- Distortion-free sound even at the highest volume thanks to LD Systems DynX® DSP technology
- Full control through a 4-channel mixer including Bluetooth® Stereo Audio Streaming
- Two-piece column for compact transport
- Secure plug-and-play connection thanks to the wireless multi-pin mechanism
- A wide range of application options through dismountable columns
- Easy operation with presets for mono or stereo configuration
- Extensive and smart accessories for installation and transport
A complete sound system that you can carry together with your instrument: introducing the MAUI 28 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 28 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed with year-long experience in the design of the column systems as a user-friendly solution for medium sized gigs and fixed installations.
The MAUI 28 G2 is equipped with two 8" woofers, sixteen 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier with an enormous 2,000 watts peak power and produce a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides a top-class performance every time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way crossover with run time correction.
The design of the MAUI 28 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer, DJ or musician in a small band, you will be thrilled with the extraordinary sound and portability of the MAUI 28 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 28 G2 is a well thought out overall solution, down to the last details.
Product type
PA Complete Systems
Type
active
Colour
Black
Max. SPL (peak)
126 dB
Frequency response
45 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Overall height
2059 mm
Weight
30,9 kg
Woofer characteristics
Low/mid driver dimensions
2 x 8 "
Woofer size
2 x 203 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Cabinet construction
vented
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Subwoofer width
370 mm
Subwoofer height
484 mm
Subwoofer depth
480 mm
Subwoofer weight
19.7 kg
Mid/Hi System
Midrange size
16 x 3 "
Midrange size
16 x 76.2 mm
Midrange magnet
Ferrite
Midrange brand
Custom-made
Midrange voice coil
1 "
Midrange voice coil
25.4 mm
Horn
Waveguide
Tweeter dimensions
2 x 1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Neodymium
Tweeter brand
Custom-made
Tweeter voice coil
1 "
Tweeter voice coil (mm)
25.4 mm
Loudspeaker inputs
1
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
780 / 795 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.6 / 5.6 kg
Amplifier module (integrated in subwoofer)
Amplifier
Class D
Amplifier output system (RMS)
1000 W
Amplifier output system (peak)
2000 W
Protection circuits
DC protection , Multiband limiter , short circuit , thermal overload
Cooling
Convection
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch , Hi-Z Level , Line level , Main level , Mono/stereo switch , MP3/Bluetooth Level , Power , Sub level
Indicators
Limit , mono , On , Protect (protection circuit engaged) , Setup , Signal , stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line inputs
2 x stereo
Line input connectors
RCA , XLR/6.3 mm jack
Line outputs
2 (1x System Out, 1x Sub Out)
Line output connectors
XLR
Mic inputs
1
Mic inputs
XLR/6.3 mm jack
MP3 inputs
1
MP3 input connectors
3.5 mm jack
Hi-Z inputs
1
Hi-Z input connectors
6.3 mm jack
Loudspeaker outputs
1
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
| Φορητό σύστημα PA 1000 W με ψηφιακό μίκτη 5 καναλιών, subwoofer 12'' και 1.5” x10 line array ηχεία. Είσοδος Bluetooth. SPX digital reverbs και 1knob EQ με multi band comp για master output.
Χαρακτηριστικά :
- 1000W (HF:190W+LF:810W) power output
- 12” subwoofer
- 1.5” x10 slim line array ηχεία
- Digital mixer (3 mono mic/line + 1 stereo line)
- Multi band comp "mode” for master output
- 1-knob EQ για κάθε channel
- Υψηλή ανάλυση SPX digital reverbs (4τύποι, έλεγχος παραμέτρων)
- 2 είσοδοι Hi-Z (υψηλή αντίσταση)
- Link out and monitor out
- Περιλαμβάνεται προστατευτικό κάλυμμα
- Προαιρετικός ποδοδιακόπτης (reverb foot)
- Προαιρετική πλατφόρμα μεταφοράς & βάση για το sub με πρόβλεψη για να συνδέεται το κάλυμμα προστασίας
- sound pressure up to 119 dB
- Nominal coverage H 170° V 30°
- Διαστάσεις : System: 334 x 2,000 x 418 mm (maximum), Line array Ηχείο: 67 x 582 x 86 mm, Subwoofer: 334 x 550 x 418 mm, Spacer: 67 x 555 x 86 mm (each)
- Βάρος: 23 kg
Iσχύς: |
1000W |
Woofer: |
12" subwoofer |
Φάσμα Συχνοτήτων: |
37 Hz - 20 kHz |
Διαστάσεις: |
System: 334 x 2,000 x 418 mm (maximum) |
Βάρος: |
23.0kg |
(Koνσόλα): |
1000W (Powered subwoofer: 810W, Line array speaker : 190W) |
Ισχύς: |
1000W |
Eισόδoι/Έξοδοι: |
3 mono mic/line + 1 stereo line/2 mono line / 1 Link out, 1 Monitior out |
Κανάλια: |
3 mono mic/line + 1 stereo line/2 mono line |
Equalizer: |
multi band EQ |
Eφφέ: |
SPX digital reverb |
Διαστάσεις: |
System: 334 x 2,000 x 418 mm (maximum), |
Βάρος: |
23.0kg |
| Even in the SMALL configuration, the smallest MAILA system is an extremely powerful, active full-range stereo system. The ground stack system consists of one MAILA SUB 2x15'' high-performance subwoofer with cardioid function, three MAILA SAT satellites and one MAILA SPA amplifier module, which drives the satellites, per stereo side.
Like the larger MAILA configurations, MAILA S combines a variety of acoustic concepts to bring maximum power and sound quality from an exceptionally compact and versatile PA system. The 2.5 kW 2x15'' high-performance subwoofer uses a bandpass design and delivers a massive and powerful bass foundation with its newly developed SysCore® DSP.
The MAILA SAT satellites in the elegant unibody aluminium housing are based on the Advanced WaveAhead® technology. Here, five 1'' tweeters are placed in front of a 6.5'' midrange driver and coupled without interference via the SonicGuide® (two combined waveguides). Furthermore, despite the compact dimensions of the satellite, the integrated passive membrane provides extended punch down to 100 Hz. The result is a classic line array dispersion with impressive throw.
On the back of the housing of each MAILA SAT is a rotating handle which hides a groundbreaking innovation: via the patented EasySplay® mechanism, users can adjust the inclination of each individual satellite continuously from 0° to 8° in the blink of an eye. The angle can be adjusted with just one hand, even under load. In this way, every MAILA system offers a uniquely flexible concept for adapting the sound coverage to any sound reinforcement situation at any time.
MAILA is not just "one" product, but a scalable sound reinforcement system that sets new standards in its diversity and flexibility. If required, the MAILA SPA module with its SysCore® DSP can control up to eight MAILA SAT and, in addition to the ground stack variant, also enables flown configurations with a separately placed subwoofer. In this way, MAILA S covers small conferences and lectures just as effortlessly and precisely as DJ performances at festivals and corporate events or a small live band.
Directly on the device or via the free MAILA app (iPadOS), every MAILA system can be adjusted quickly, easily and in detail and supplied with software updates wirelessly. Based on the integrated LogoLink® Wireless Connection, operating ranges of up to 30 metres are no problem for MAILA under practical conditions. Once connected, the app automatically detects the available MAILA components and enables the system to be set up quickly and easily - including calculation of the SAT angles - in the run-up to an event. The highlight: the wireless antennas are invisibly integrated into the LD logos (LogoLink®).
With MAILA, LD Systems presents a new sound reinforcement concept with which users do not need to commit to one system only. MAILA has many faces.
Scope of delivery includes: 6x MAILA SAT satellite, 2x MAILA SPA amplifier module, 2x MAILA SUB subwoofer, 2 x MAILA POLE DB distance rod, 2 x MAILA FC1, 2 x MAILA SUB CB, 2 x MAILA SUB PC and 4 x power cable.
Product type
PA Complete Systems Accessories
Components
2 x MAILA SPA, 2 x MAILA SUB, 6 x MAILA SAT
Total Height
2502mm (Vertikal subwoofer)
Dispersion (H x V)
100° x Curvature dependent
Accessories (included)
2 x Distance bar, 2 x MAILA FC1, 2 x MAILA SUB CB, 2 x MAILA SUB PC, 4 x power cable
System Power (RMS)
7500 W
Frequency response (-6dB)
34 Hz - 20 kHz
| MAUI 11 G2 W Portable Column PA System with Mixer and Bluetooth white
A complete sound system that you can carry together with your instrument: introducing the MAUI 11 G2. The two column elements in the padded shoulder bag, the subwoofer in one hand and the guitar or keyboard in the other - and off you go! Setting up the complete system, which doubles as a PA and monitor system is just as easy thanks to the special multi-pin cable plugs. The compact and elegant MAUI 11 G2 offers an unbeatable sound quality and wide-ranging sound distribution. It was developed after years of experience in the design of the column systems as a user-friendly solution for small to medium-sized gigs and fixed installations.
The MAUI 11 G2 is equipped with three 6.5" woofers, eight 3" full-range speakers and two 1" neodymium HF drivers. They are driven by a light Class-D power amplifier boasting 1,000 watts of peak power and producing a grunty bass, balanced mids and precise and silky highs. The DynX® DSP technology from LD Systems provides top-class performance each time and the highest level of freedom from distortion. It includes a multiband limiter which protects against overloading, an EQ, a compressor and a 3-way-crossover with run time correction.
The design of the MAUI 11 G2 line array achieves a longer range, increased resistance to feedback and a wider space coverage, which makes separate monitor speakers superfluous. The wave guide of the tweeters has been developed using the Boundary Element Method (BEM), a numerical simulation of the sound radiation and dispersion. It reduces reflections from the floor and ceiling and prevents sidelobe levels and thus achieves an homogeneous dispersion - Your audience hears you in the back row just as clearly as in the front.
With the integrated 4-channel mixer, system presets for mono or stereo configuration and Bluetooth® Audio Streaming, you have full control over the system. Whether you are a singer-songwriter, solo entertainer or DJ, you will be thrilled with the extraordinary sound and portability of the MAUI 11 G2. The column and the subwoofer can be set up separately: thus, the system is extremely flexible and is also an excellent choice for fixed installations. With a selection of clever transport accessories and special mounting hardware, the MAUI 11 G2 is a well thought out overall solution, down to the last details.
General
Product type
PA Complete Systems
Frequency response
50 - 20000 Hz
Dispersion (H x V)
120° x 20 °
Woofer characteristics
Low/mid driver dimensions
3 x 6.5 "
Woofer voice coil (mm)
38.1 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Mid/Hi System
Midrange size
8 x 76.2 mm
Midrange brand
Custom-made
Midrange voice coil
25.4 mm
Tweeter dimensions
2 x1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil (mm)
25.4 mm
Speaker input connections
Custom-made multipin
Cabinet construction mid/high
Closed
Mid/Hi system cabinet material
Aluminium
Mid/Hi system cabinet surface
HD coating
Mid/Hi system width
96 mm
Mid/Hi system height
620 / 730 mm
Mid/Hi system depth
104 mm
Mid/Hi system weight
5.4 / 2.6 kg
Amplifier module (integrated in subwoofer)
Amplifier output system (RMS)
500 W
Amplifier output system (peak)
1000 W
Protection circuits
DC protection, Multiband limiter, short circuit, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
10% to 80%, (non-condensing)
Controls
Bluetooth switch, Hi-Z Level, Line level, Main level, Mono/stereo switch, MP3/Bluetooth Level, Power, Sub level
Indicators
Limit, mono, On, Protect (protection circuit engaged), Setup, Signal, stereo
Power connector
IEC power cable (included)
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Power consumption Off / On / Max.
0/11/600 W
Line input connectors
RCA, XLR/6.3 mm jack
Line outputs
1 x direct out
Line output connectors
XLR
Mic inputs
XLR/6.3 mm jack
MP3 input connectors
3.5 mm jack
Hi-Z input connectors
6.3 mm jack
Speaker output connections
Custom-made multipin
DSP characteristics
Bit depth AD/DA converter
24 bit
Internal sampling frequency
48 kHz
Signal/noise ratio
100 dB
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.