Content |
Ψηφιακή μονάδα βάθους και πολυεφφέ. Επεξεργασία στα 32 bit
floating point. Ταχύτητες δειγματοληψίας 44.1 έως 96 kHz. Βιβλιοθήκη
με 1200 εργοστασιακά presets.Υψηλής ανάλυσης τύπου OLED οθόνη
επεξεργασίας. Οι είσοδοι και έξοδοι περιλαμβάνουν XLR balanced στα
24bit με επιλογή στάθμης στα +4dBu και -10dBV, AES/EBU καθώς και
MIDI IN, OUT, THRU, και θύρα Ethernet για σύνδεση σε δίκτυο
HiQnet.
|
The AD2055 combines 100% discrete, pure class A signal amplifiers with state-of-
the-art passive and active filter topologies. The AD2055's unique circuitry delivers
very high resolution transient detail at the operational extremes of real world equalization
demands. The AD2055 auto-bias DC servo loop control eliminates the need for all
interstage capacitor coupling. The AD2055 breathes life into all musical performances!
AD2055 FEATURES
Pure Class A, 100% discrete design
Smooth musical detail and sonic excellence
Minimum audio signal path
Dual mono operation
Transparent active and passive filter design
High headroom +30dB Very low noise -94dB
Fully balanced inputs and outputs
DC coupled, no transformers in audio path
Switched frequencies in high and low bands
Mid bands use X10 frequency for extended range
Wide bandwidth -3dB 1Hz to 450kHz
Low distortion less than 0.5% THD and IMD
All signal routing with sealed silver relays Conductive
plastic potentiometers for low noise
External 150W toroidal power supply 100% discrete
power supplies for audio path
Long lasting, stainless steel hardware
SONIC EXCELLENCE
The Avalon AD2055 Pure Class A music equalizer is the most powerful, low noise
parametric equalizer available today. Designed to optimize absolute signal integrity
and musical performance, the AD2055 combines the best of active and passive filter
topologies with sonic excellence unequaled by lesser designs. The AD2055 is the
perfect solution for two buss music-program equalization, special instrument EQ and
FX applications and ultra high performance mastering studio's.
Features include state-of-the-art, balanced 100% discrete, Pure Class A signal amplifiers,
practical user features and rugged hardware designed to deliver true high performance
audio for many years.
PASSIVE-ACTIVE FILTER DESIGN
Avalon equalizers feature the unique combination of both active and passive filter EQ designs.
This special combination enables the AD2055 to deliver high speed transient detail at the
operational extremes of real-world equalization demands. The passive high and low bands offer
alternate musical tone range to the full function active parametric mid bands. Passive equalizers
have long been a favorite with music lovers around the world. Full bodied, powerful (up to +/-32dB,
64dB range !) and sweet frequency selections are the benefits of the passive high-low EQ bands.
The full bandwidth twin mid bands provide variable frequency selection (X10 frequency multipliers
for very wide range), variable Q (width) and amplitude control.
MINIMUM SIGNAL PATH DESIGN
Avalon's advanced true symmetry design offers high-voltage, large headroom, extended bandwidth
and very low noise. The use of 100% discrete, Pure Class A signal amplifiers give the serious music
professional unlimited sonic character and a natural harmonic detail that enhances the program
material and becomes one with the music itself. The Avalon AD2055 breathes life!
AD2055 SPECIFICATIONS
Circuit Topology High-voltage 100% discrete, balanced and symmetrical
Class A
Output Gain Range Unity Gain
Maximum Input Level +30dB balanced XLR pin 2 hot
Maximum Output Level +32dB balanced 600 ohms, DC coupled, high-current
discrete Class A
Input / Output Type XLR type, pin 2 hot balanced
Noise 20kHz Unweighted -94dB (EQ in)
Distortion THD, IMD 0.5% (typical 0.05% at +6dB 1kHz)
Frequency Response -3dB 1Hz to 450kHz (input band limited)
Equalizer Type Passive high and low bands plus two fully parametric mid
bands
Bypass Hard-wire relay bypass for equalizer in-out
Low Band F1 Passive, amplitude to -32dB to +32dB shelf or peak-dip curve
F1 Frequency Range Switched 10 position 18Hz, 25, 30, 50, 72, 100, 150, 215,
300, 450Hz
Mid Band F2 Active, amplitude to -16dB to +16dB peak-dip curve
F2 Frequency Range Variable 35Hz to 450Hz (x10) 350Hz to 4k5Hz, Q (width)
0.3 to 3.0
Mid Band F3 Active, amplitude to -16dB to +16dB peak-dip curve
F3 Frequency Range Variable 160Hz to 2k0Hz (x10) 1k6Hz to 20kHz, Q (width)
0.3 to 3.0
High Band F4 Passive, amplitude to -26dB to +26dB shelf or peak-dip curve
F4 Frequency Range Switched 10 position 1k5Hz, 2k5, 3k5, 5k, 7k2, 10k, 12k5,
15k, 20k, 25kHz
AC-DC Power External AC supply, 150w toroidal transformer, 4 pin cable 90v
isolated,
(B2T Power Supply Included) 100-240v selectable 50/60Hz, 150w max
Dimensions 19 x 3.5 x 12 in (482 x 88 x 305mm)
Shipping weight 30lbs (13.6 kg)
|
DBX-166XL
Compressor - limited- gate /expander 2 εισόδων κύκλωμα overeasy,
peakstopplus, είσοδοι- έξοδοι XLR κατάλληλος για studio & live χρήση.
Overview Bring a more professional sound to your mix
Adding a dbx® 166xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments. To protect your expensive amps and speakers the PeakStop® limiter provides an absolute ceiling for peak excursions or large transients that could damage your equipment.
dbx knows compressors...after all we invented them! The 166xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 166xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Features
- Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
- New gate timing algorithms ensure the smoothest release characteristics
- Program-adaptive expander/gates
- Great sounding dynamics control for any type of program material
- Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
- Stereo or dual-mono operation
- Balanced inputs and outputs on 1/4" TRS and XLR connectors
- Side Chain insert
- Classic dbx® "Auto" mode
Specifications Input Connectors | 1/4" TRS, female XLR (pin 2 hot) | Input Impedance | >50kΩ balanced, >25kΩ unbalanced | Max Input | >+24dBu, Balanced or Unbalanced | Input Type | Electronically balanced/unbalanced, RF filtered | Sidechain | 1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) | Sidechain Impedance | Tip = >10kΩ (Input), Ring = 2kΩ (Output) | Sidechain Max Input Level | >+20dBu (tip/input); >+20dBu (ring/output) | Output Connectors | 1/4" TRS, female XLR (pin 2 hot) | Output Impedance | 120Ω balanced, >60Ω unbalanced | Max Output | +21dBu balanced/unbalanced into 2kΩ or greater; >+18 dBm balanced/unbalanced (into 600Ω) | Frequency Response | 20Hz - 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain | Noise | |
|
Features Enhance switch to restore spectral balance of compressed signal Switchable Mode - Dual Channel or Stereo linked Above or Below Threshold LEDs Balanced XLR and Jack Inputs and Outputs Intuitive, user friendly layout Flawless performance
Innovation The ARX COMPO? is a unique compressor/limiter designed for use in any professional audio dynamics control application, packaged in a compact 1 RU chassis.The COMPO operates as two independent compressor/limiters, with 'industry standard' variable Threshold, Ratio and Output gain controls. A Stereo Link switch on the front panel lets both channels track as a stereo pair in a Master/Slave configuration. Enhance Switch The COMPO features an 'Enhance' switch, which provides frequency restoration to preserve the spectral balance of the audio signal, compensating for the sagging Low and High frequency response of compressed program material. The best way to think of it is as a 'smart' loudness control. Wide Scale metering There is comprehensive LED indication of all operating functions and status. Above or Below Threshold LEDs on each channel give you instant visual confirmation of compressor activity, as well as easy to read LED Gain Reduction meters. Balanced Inputs and Outputs On the rear panel, each channel has true differential Balanced inputs and outputs, on both XLR and TRS jack connectors. Other features include an Active/Bypass switch for each channel, and passive RFI filters on the inputs. Universal AC Power AC power range is a universal 100 to 120V or 220 to 240V AC, and is connected to the unit via a removable power lead and standard 3 pin IEC connector, with built-in fuse and voltage change switch. ARX Quality With its smooth compression, intuitive user friendly layout, high density precision circuitry, and extensive user-variable operating parameters, the ARX COMPO is the ideal installation 'set and forget' compressor, and is also equally at home in Studio, Broadcast and Sound Reinforcement environments.
Every day, ARX Audio interface products solve audio problems for thousands of people around the world.
T E C H N I C A L S P E C I F I C A T I O N S Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms Input Headroom + 22 dB CMRR >60 dB, 20 Hz-20 KHz Output Impedance Balanced 300 ohms, Unbalanced 150 ohms Output Level (Max) + 22 dB Frequency Response 20Hz to 20KHz ±0.4dB Signal to Noise ratio -85 dB Unweighted, -99 dB 'A' weighted Distortion .02% THD @ 0dB,1KHz Dynamic Range 107 dB Enhance Section Low Enhance 50 Hz, High Enhance 10 KHz Power Requirements 100/120 V AC, 220/240 V AC Weight 5 lbs/2.2 Kg Dimensions 19“W x 1?“H x 6“D, 482 x 44 x 155mm Input/OutputConnector type XLR, Balanced Jack
Front Panel Controls Channel A Active/Bypassed IN/OUT switch Threshold, Ratio and Output Gain controls Numbered marker panel for labelling compressor assigns 5 segment LED Gain Reduction display Above/Below Threshold status LEDs Enhance switch and status LED Stereo link switch and status LED Channel B controls identical to Channel A Rear Panel Connectors Balanced XLR Input and Output connectors. Balanced TRS jack Input and Output connectors. AC input connector, with voltage switch and fuse. |
Νέα έκδοση S Compressor gate/expander 2 εισόδων κύκλωμα "autodynamic" είσοδοι - έξοδοι XLR κατάλληλος για γενική χρήση.
Bring a more professional sound to your mix
Adding a dbx® 266xs Compressor/Limiter/Gate to your live sound rig or studio gives you more dynamic control to help create a more polished, professional sound. Having compression in your audio chain gives you the ability to smooth out uneven levels, add sustain to guitars and fatten up your drums. It also makes it easy to bring vocals to the front of your mix - adding greater clarity and making them stand out from the surrounding instruments.
dbx knows compressors...after all we invented them! The 266xs is the latest in a long line of the world's most successful compressors from the inventors of the technology. Its patented Overeasy® compression technology provides smooth and musical performance while the AutoDynamic™ attack and release controls, found only on dbx compressors, puts great sound within easy reach. The 266xs can operate in stereo or dual-mono modes, has true RMS power summing and features quality XLR and 1/4" TRS inputs and outputs. It cuts no corners on visual feedback with gain reduction metering and easy-to-read backlit switches.
Features
- Error proof operation to smooth uneven levels, add sustain to guitars, fatten drums or tighten up mixes
- New gate timing algorithms ensure the smoothest release characteristics
- Program-adaptive expander/gates
- Great sounding dynamics control for any type of program material
- Separate precision LED displays for gain reduction, compression threshold and gate threshold allow quick, accurate setup
- Stereo or dual-mono operation
- Balanced inputs and outputs on 1/4" TRS and XLR connectors
- Side Chain insert
- Classic dbx® "Auto" mode
Specifications Input Connectors | 1/4" TRS and female XLR (pin 2 hot) | Input Type | Electronically balanced/unbalanced, RF filtered | Input Impedance | 40kΩ balanced/unbalanced | Max Input | >+22dBu Balanced or Unbalanced | Output Connectors | 1/4" TRS, female XLR (pin 2 hot) | Output Type | Impedance-balanced/unbalanced, RF filtered | Output Impedance | +4dBu: 100Ω balanced, 50Ω unbalanced; -10dBu: 1kΩ balanced, 500Ω unbalanced | Max Output | >+21dBu balanced/unbalanced into 2kΩ or greater; >+18dBm balanced/unbalanced (into 600Ω) | Sidechain | 1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) | Sidechain Impedance | Tip = >10kΩ (Input), Ring = 2kΩ (Output) | Sidechain Max Input Level | Tip = >+22dBu (Input) | Sidechain Max Output Level | Ring = >+20dBu (Output) | Compressor Threshold Range | -40dBu to +20dBu | Compressor Threshold Characteristic | Selectable OverEasy® or hard knee | Compressor Ratio | 1:1 to Infinity:1 | Compressor Attack Time | Scalable Program-Dependent AutoDynamic™ | Compressor Release Time | Scalable Program-Dependent AutoDynamic™ | Expander/Gate Threshold Range | -60dBu to +15dBu | Expander/Gate Ratio | 1:1 to 4:1 | Expander/Gate Attack Time | |
| DBX 223XS
Ηλεκτρονικό crossover 2 δρόμων με επιλεγόμενη συχνότητα cross,
ρυθμιζόμενο input & output level, κλίση αποκοπής 24dB ανά οκτάβα,
L & R είσοδοι & balanced έξοδοι με XLR.
Overview
More sound to your amps and speakers
The secret to making speakers sound great lies with the crossover you use. With the dbx® 223xs Crossover you\'ll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world\'s finest processors. The 223xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 223xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.
The dbx 223xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs
Features
- XLR balanced ins and outs
- Mode switch for stereo 2-way or mono 3-way operation
- Low frequency summed (subwoofer) output
- x10 range switch on both channels
- 40Hz high pass (low cut) filter both channels
- Phase reverse switch on all outputs
- Individual level controls on all outputs
- 24dB per octave Linkwitz-Riley filters (the professional standard)
- Stereo/Mono status LEDs indicate the selected mode
- dbx® 2 year parts and labor as standard
- CSA NRTL/C approved
- CE compliant
Specifications
Input Connectors |
XLR (pin 2 hot) |
Input Type |
Electronically balanced/unbalanced, RF filtered |
Input Impedance |
Balanced >50k ohm, unbalanced >25k ohm |
Max Input |
>+22dBu balanced or unbalanced |
CMRR |
>40dB, typically >55dB at 1kHz |
Output Connectors |
XLR |
Output Type |
Impedance-balanaced/unbalanced, RF filtered |
Output Impedance |
Balanced 200 ohm, unbalanced 100 ohm |
Max Output |
>+21dBu balanced/unbalanced into 2k ohms or greater |
Bandwidth |
20Hz to 20kHz, +/-0.5dB |
Frequency Response |
< 3 Hz to > 90 kHz, +0/-3 dB |
Signal to Noise Ratio |
Ref: +4 dBu, 22 kHz measurement bandwidth |
Signal-to-Noise (Stereo Mode) |
>94dB (Low Output), >91dB (High Output) |
Signal-to-Noise (Mono Mode) |
>94dB (Low Output), >93dB (Mid Output), >91dB (High Output) |
Dynamic Range |
> 106 dB, unweighted, any output |
THD+Noise |
< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz |
Interchannel Crosstalk |
< -80 dB, 20 Hz to 20 kHz |
Crossover Frequencies (Stereo Mode) |
Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
Crossover Frequencies (Mono Mode) |
Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) |
Crossover Filter Type |
Linkwitz-Riley, 24 dB/octave, state-variable |
Low cut Switch |
Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. |
Phase Invert Switch |
Inverts the phase at the output, one switch per output. |
x1 / x10 Switch |
Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. |
Mode Switch |
Selects stereo/mono and 2/3-way operation |
LF Sum Switch |
Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2ʼs low output phase invert LED to indicate that this output is not operational in the LF sum mode. |
Indicators |
Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) |
Operating Voltage |
100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ |
Operating Temperature |
32°F to 113°F (0°C to 45°C) |
Power Consumption |
15W |
Power Connector |
IEC receptacle |
Dimensions |
1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) |
Unit Weight |
3.7 lbs. (1.7 kg) |
Shipping Weight |
5.4 lbs. (2.5 kg) |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.