| Content | Looking for a portable and versatile active speaker for live sound applications? Then look no further than the Mackie Thump215XT 15" Powered PA Loudspeaker System with DSP and Bluetooth, a powerful PA speaker that includes a 2-channel mixer, great for small club/band PA systems, singer/songwriters, boardrooms, A/V presentations, classrooms, or as a personal monitor for practice or performance. The system features four application-specific voicing modes, an outdoor mode, and Bluetooth for streaming, speaker link, and wireless control.
The Thump215XT's mixer features two combo XLR-1/4" mic/line channels with dedicated gain controls, while an XLR output is provided for daisy-chaining additional speakers. A 3.5mm TRS aux input is also available on channel 2 for connecting your favorite portable player. The tough, impact-resistant polypropylene enclosure ensure protection from on-the-road wear and tear. The bottom of the cabinet provides a pole cup for mounting on a speaker pole or stand. Additionally, M10 fly points are included for permanent installation. The angled design allows the speaker to be used as a floor monitor for onstage performance monitoring.
- 1400W ultraefficient Class-D amplifier
- Built-Like-A-Tank to conquer every gig while lightweight for easy loading
- Frequency response: 40 Hz to 20 kHz
- Max SPL: 129 dB
- 15” high-performance woofer
- 1” compression driver
- Outdoor mode optimizes voicing for open air venues
- Built-in Feedback Eliminator reduces squeals and out of control rumble
- Music Ducking mode automatically reduces the level of Ch.2 when Ch.1 receives signal
- Front LED On/Off switch
- Standard pole mount
- M10 flypoints for permanent install
- Monitor wedge provides optimal angle for use as a floor monitor
- Universal power supply
Under the hood of ThumpXT is some powerful processing that you can tap into to up your sound quality game. With 4 different application-specific voicing modes, you can instantly optimize your speakers for how you use them at the push of a single button.
- Music: Made to enhance pre-recorded music
- Live: Great for general sound reinforcement
- Club: Provides a low-end punch
- Monitor: Optimizes the speaker for use as a floor wedge keeping feedback in check
Ever bring your speakers from inside a room to the scary outdoors and wonder why it sounds so different? You're not alone, and lucky for you we've thought of everything. When you set up your system out in the wild, just push the Outdoor Mode button and your lovely, full sound is restored.
Easily stream music directly to the speaker and enjoy the wireless freedom to dance around while playing DJ. And while you’re at it, you can dive into the Thump Connect 2 App and adjust anything from system EQ and Voicing Modes to channel levels and venue-specific presets.
- Bluetooth connectivity for streaming, speaker linking, and control
- Download the Thump Connect 2 app for complete wireless control
- Link 2 ThumpXT loudspeakers for a powerful, wireless, music playback system in both stereo and dual-zone configuration
- Channel 1 features a combo XLR-1/4" input that accepts mic or line signals
- Channel 2 features a combo XLR-1/4" line input plus stereo 3.5mm input
- Thru output contains audio from both input channels
These are the loudest, most powerful, and best sounding Thump loudspeakers ever, and they are ready to take on your most demanding gigs. Completely redesigned from the ground up, Thump has beefier drivers, 1400W Class-D amplifiers, and powerful tools to make your next gig easier than ever.
You've got music playing nice and loud, but it's time for another announcement. Sure, you could mess with your levels every time, but who's got time for that. Simply press the Music Ducking button, and channel 2 will automatically turn down whenever you speak into the mic on channel 1.
Ever get a little too up close and personal with the microphone only to hear a loud, ear-destroying squeal? That's commonly known as feedback. And it's an unfortunate issue that physics won't change its mind on. But wait! Hit the Feedback Eliminator button and laugh in the face of those silly acoustic laws.
|
Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs
|
One of the best ways to fill the room with bass with your PA system is by adding a subwoofer. Mackie's Thump 115S powered subwoofer was designed to boost the low-frequency power and output of a PA system using their Thump Series powered speakers, but it'll work with any system that needs more bass. This sub features a built-in amplifier that sends up to 1400 watts to the 15" low-frequency driver in an efficient bandpass enclosure, creating plenty of bass energy for just about any musical application or venue. Internal protection circuits keep the sub rockin' and safely under control, even when the party gets loud and raucous.
Integrates well
Selectable High Pass Modes with a variable crossover setting optimizes the sub for different system configurations and musical genres. A 2-channel input mixer plus 2 full-range and 2 high-pass outputs offer plenty of wiring and integration options. Convenient, top corner handles help ease the pain when carrying this Built-Like-A-Tank™ sub to and from a gig.
Product highlights:
- powered PA subwoofer
- 15" woofer in a bandpass enclosure
- built-in amplifier: 1400 watts peak
- maximum SPL: 131 dB
- frequency range: 46-150 Hz
- 4 High Pass Modes: Flat, Deep, Punch, Variable (with control)
- phase switch and output level control
Other features:
- inputs: 2 XLR
- outputs: 4 XLR (2 full-range, 2 high-pass)
- Built-Like-A-Tank™ bandpass enclosure with weather-resistant perforated metal grille
- Integrated M20-threaded pole mount
- dimensions: 18.13" W x 18.25" H x 25.13" D
- weight: 52.2 lbs.
- warranty: 1 year
- MFR # THUMP115S
What's in the box:
- Powered 15" PA subwoofer
- 6' AC Power cord (IEC 3-prong)
- Quickstart guide
|
Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 12 M
Description For a band, monitors play an important role too. The classic
Description monitor for vocals/guitar is a 12" monitor. The PREMIUM PR:O
Description 12 M monitor is designed without compromise exactly for this
Description application to provide the highest possible level of on-stage
Description performance.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 70 Hz ? 19 kHz
Frequency response @ -10dB 63 Hz ? 19 kHz
Speaker 1x 12?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Dimensions (WxHxD) 39 cm x 55,5 cm x 38 cm
Dimensions (WxHxD) 15 1/4? x 21 3/4? x 15?
Weight 16 kg
Weight 35.2 lbs
|
User's manual
LD Systems STINGER SUB 15 A G3
Active 15" bass-reflex PA subwoofer
- Active 15” bass reflex PA subwoofer
- High-efficiency 450 watts RMS digital power stage and 133 dB max. SPL
- 15” custom design woofer for extended low end down to 40 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
STINGER SUB 15 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 15 A G3 is powered by high efficiency Class D amplification with a mighty 450 watts RMS output. It drives a custom designed 15” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 15 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 15 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
15 "
Woofer Size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
RMS
450 W
Peak power
900 W
Frequency response
40 - 200 Hz
Max. SPL (peak)
133 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
567 mm
Height
477 mm
Depth
624 mm
Weight
31,9 kg
| LD Systems ICOA SUB 15 A Powered 15" Bass Reflex PA Subwoofer
Music starts to really groove when you can feel the bass in your body. The ICOA SUB can deliver as much bass as you want - to get the people rocking and entice them to the dance floor. It can even lend a multimedia presentation that special oomph it needs to reach its audience.
The ICOA SUB pumps out serious bass and gives you greater headroom and a clearer sound. This is because your subwoofer relieves the main speaker, whose woofers are now less burdened by high-energy bass impulses, resulting in less intermodulation distortion. Even at higher volumes, the sound doesn't get muffled. Voices and instruments stay crystal clear.
Thanks to its powerful Class D amplifier with 400-watt RMS or 1600-watt peak output, you have some serious power at your command. The presets of the integrated DynX DSP - which offers crossover frequencies of 80, 100 and 120 Hz - let you finely balance your ICOA SUB perfectly with your system. Signal polarity can also be reversed and the SUB offers a delay line-preset for distances up to 10 meters.
When your needs begin to expand as the venues get bigger, your setup can grow along with you. Simply add more ICOA SUBs, which can be operated in parallel, giving you more and more power. You can also take advantage of the cardioid-preset. Simply position the additional subwoofers next to your ICOA SUB facing to the rear and enable the cardioid-preset to get a quieter and controlled low-end at the back while still keeping the punch at the front.
The rugged housings made of 18 mm laminated wood can be stacked, while the M20 thread on top lets you mount the main speakers using a distance pole. Transport is simplified by mounting rollers to the rear. Corner protectors guard the edges during setup. To keep the ICOA SUB from slipping out of your hands, its four aluminium grips are covered in rubber.
Whether you're a DJ, singer-songwriter, rock or party band, the ICOA SUB produces the perfect bass to complement your live music. Lectures and multimedia presentations also benefit from its clarity and powerful presence, giving you the proper support to amplify emotions in your audience.
Product type
PA subwoofer
Low/mid Woofer dimensions
15 "
Woofer dimensions (mm)
381 mm
Woofer voice coil (mm)
76.5 mm
Frequency response (-10dB)
36Hz Preset depending
Protection circuits
Excursion Limiter, over voltage, over-current, Peak Limiter, RMS Limiter, thermal overload
Line input connectors
XLR/6.3mm jack combo jacks (balanced)
Line output connectors
XLR
Operating voltage
100 - 240 V
Power consumption (max.)
675 W
Operating Temperature
0 - 40 °C
Relative Humidity
< 60% (non-condensing)
Cabinet material
18 mm Multiplex
Cabinet surface
texture paint
Cabinet construction
Bass Reflex
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.