MARMITEK Split TS14 – Audio splitter – 1 in / 2 out – Toslink

• Με βελτιωμένο ρυθμό δειγματοληψίας 192 kHz για την καλύτερη αναπαραγωγή ήχου.
• Υποστηρίζει ασυμπίεστα σήματα ήχου 2 καναλιών LPCM (γραμμική διαμόρφωση παλμικού κώδικα).
• Υποστηρίζει συμπιεσμένα 2κάναλα και πολυκάναλα ηχητικά σήματα Dolby Digital και DTS.
• Ιδανικό για παρουσίαση ή διανομή σε άλλο δωμάτιο.
• Ο οπτικός (Toslink) διαχωριστής ψηφιακού ήχου μπορεί να διαχωρίσει μια ενιαία οπτική ψηφιακή είσοδο σε τέσσερις εξόδους χωρίς καθυστέρηση ή απώλεια ποιότητας.
• Υποστηρίζει τα πρότυπα S/PDIF και Toslink.

Γραφικό equalizer 1/3 της οκτάβας, 2x31 περιοχών. Επιλεγόμενο εύρος αυξομείωσης 6/15dB, φίλτρο Bessel αποκοπής χαμηλών συχνοτήτων στα 40Hz με 18dB ανά οκτάβα. Hλεκτρονικά ισορροπημένες (balanced), unbalanced και RF φιλτραρισμένες είσοδοι και έξοδοι με XLR, TRS jacks και γυμνών επαφών, 3U.

1231 Dual 31-Band Graphic Equalizer

The dbx? 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1231 provides standard features like dual-channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other insightful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.

The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 3U steel/aluminum chassis.

SPECIFICATIONS:

 

DBX 1215
Ισοσταθμιστής 2 x 15 περιοχών με XLR IN/OUT

1215 Dual 15-Band Graphic Equalizer

The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.

The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.

•   Switchable boost/cut ranges of ±6 or ±15 dB
•   Electronically balanced/unbalanced inputs
•   Servo balanced/unbalanced inputs
•   RF filtered inputs and outputs
•  XLR, Barrier Strip, and 1/4" TRS connectors
•  -12dB/+12dB input gain range
•  18dB/octave 40Hz Bessel low-cut filter
•  Chassis/signal ground lift capability
•  Internal power supply transformer
•  Power-off hardwire relay bypass with 2-second power-up delay

Νέα έκδοση S ηλεκτρονικού crossover 3 δρόμων με επιλεγόμενη συχνότητα cross, ρυθμιζόμενο input & output level, κλίση αποκοπής 24dB ανά οκτάβα, L & R είσοδοι & balanced έξοδοι με XLR.

More sound to your amps and speakers

The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.

The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.

XLR balanced ins and outs

Mode switches for mono 4-way or stereo 2-way/3-way operation

Low frequency summed (subwoofer) output

x10 range switch on both channels

40Hz high pass (low cut) filter both channels

Phase reverse switch on all outputs

Individual level controls on all outputs

24dB per octave Linkwitz-Riley filters (the professional standard)

Stereo/Mono status LEDs indicate the selected mode

dbx® 2 year parts and labor as standard

CSA NRTL/C approved

CE compliant

A passive dual channel line splitter that is mainly used to feed the left and right master outputs of a mixer into several inputs such as power amplifiers, recording machines etc. A specially designed audio frequency transformer maintains signal integrity and prevents ground loop hum. This unit also converts unbalanced signals into balanced signals and vice versa.

Technical specifications:

• 2 channel line splitter "1 into 3"
• Each channel with: Input: female XLR type with parallel male XLR Type output 2 transformer isolated male XLR type outputs
• Transformer ratio 1 : 1
•  Nominal level: 0 dB
• Max. level +20 dB
• Nominal impedance input and output: 600 ohms
• Ground lift switch

• Συνδέστε 2 τηλεοράσεις ή βιντεοπροβολείς και κάντε εναλλαγή μεταξύ 4 συνδεδεμένων συσκευών HDMI.
• Ο διακόπτης μήτρας HDMI σας επιτρέπει να παρακολουθείτε άλλες συσκευές HDMI σε 2 οθόνες ανεξάρτητα.
• Χρησιμοποιήστε τον ενσωματωμένο υποβιβαστή 1080p σε περίπτωση που 1 ή περισσότερες οθόνες δεν υποστηρίζουν ανάλυση 4K.
• Κατάλληλο για την πιο πρόσφατη ανάλυση Ultra HD 4K60 (3840 x 2160/60 Hz), High Dynamic Range (HDR), Deep Color και χρώματα chroma 4:4:4.
• Υποστηρίζει Dolby Atmos και DTS:X και όλες τις άλλες κοινές μορφές ήχου.
• Με πρόσθετη ψηφιακή έξοδο ήχου για να συνδέσετε επίσης τον δέκτη AV χρησιμοποιώντας ένα μόνο καλώδιο.
• Υποστηρίζει κανάλι επιστροφής ήχου (ARC) για την αποφυγή προβλημάτων συγχρονισμού χειλιών.
• Πραγματοποιεί εναλλαγές αυτόματα ή/και με το τηλεχειριστήριο.