Content |
The Roadie X-Stream blends fog and air to produce a variety of effects; from an optically translucent haze to an immensely dense "white-out" of fog.
* Output and density level control
* Continuous output
* 5000 m³/min fog output
* Integrated high velocity fan
* 2 x 2500 W heat exchanger
* 18 min heat-up time
* For vertical or horizontal effect projection
* 2 x 9.5 liter fluid capacity
* Different fluid options for different applications
* Low fluid sensing
* Onboard DMX
* On-board control panel
* Optional hand-held remote control
| VIPER 2,6
Μηχανή καπνού 2600W, λειτουργεί με DMX 512 ή αναλογικό 0-10V ή αυτόνομα,
για την λειτουργία της χρειάζεται 1 ή 2 (για LOOK FAN) κανάλια, 7 λεπτά χρόνος
προθέρμανσης της αντλίας, εσωτερικό timer για χρήση της αυτόνομης λειτουργίας.
Κατανάλωση 240ml/min για μέγιστη έξοδο και 35ml/min συνεχούς ροής. Οθόνη
προγραμματισμού και βάρος 12kg. Δυνατότητα σύνδεσης με LOOK FAN.
Digital technology and a new Design
The viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power.
Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.
Features:
- Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room. The fan can be adjusted separately from 0 - 99% .
- DMX 512 as standard
The Viper 2.6 can be controlled via DMX 512. Pump and fan can here be controlled separately. Thus, the connected fan can be used as wind machine as well. The connection is done with 5pin-XLR-plugs, two following addresses will be taken. The DMX start address can be adjusted and saved via the control panel. The address remains saved also when the machine is unplugged. The machine can also be controlled with analog (0 - 10V) via a lighting desk or a XLR-remote (option). The adjustment of the fan is done directly at the machine, the pump can be adjusted via the analog control. The connection is done with 3-pin-XLR-plug. A Stand-Alone-Mode is possible as well. The adjustments of the pump and the fan are done directly at the machine. Pressing the start button once, the machine starts running with the pre-adjusted levels.
With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.
The control panel with LED display and simple symbols allow an easy operation. It also protects the control buttons against dirt.
- Robust flightcase version
The flightcase on wheels protect the inbuild machine and fan and ensures an easy transport and flexible handling. Handles at both sides of the case allow an easy lifting. Removable lids enable direct access to control panels and fluid tank.
Liquid
The following Look fog liquids are available for the Viper 2.6/Viper deLuxe: Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid)
Safety
The viper 2.6 is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke
complete with a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper 2.6:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Technical Data
Procedure: vaporizing fog generator
Power requirement: 2600 Watt
Voltage: 230 V / 50 Hz
Warm up time: approx. 7 min.
Fluid consumption at max. output
at continuous output: 240 ml/min.
70 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection: max. 15 m
Fogging time at
external Fan: max. 800 Watt
Air quantity adjustable in 99 steps
Control: DMX 512
0 - 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 520 x 230 x 250 mm
Weight without bottle: approx. 12 kg |
Μηχανή καπνού 400W με χειριστήριο, χρόνος προετοιμασίας ± 5min. ΄Εξοδος καπνού ± 2,3m, κατανάλωση υγρού 21ml/min, κάλυψη καπνού 50m³/min, δοχείο 0,25L. Bάρος: 2kg.
- Fog machine for small party rooms
- On/off cable remote control
- Mounting bracket
- Overheat protection
- Fluid level indication
- Smoke-output: ca. 2 m
- Control: Wired remote control provided
- Power supply of device: Fix fehlt
Technical specifications
Power supply: |
230 V AC, 50 Hz |
Smoke-output: |
2 m |
Warm-up time: |
5 min. |
Output volume: |
14 m³/min. |
Tank capacity: |
0.3 l |
Dimensions (L x W x H): |
265 x 145 x 170 mm |
Weight: |
2,5 kg |
Power consumption: |
400 W |
Fluid consumption: |
ca. 21 - |
IP classification: |
IP20 |
Color: |
Silver |
Height: |
17 cm |
Depth: |
26,5 cm |
Width: |
14,5 cm |
Packaging units
PU | EAN | Weight | Dimensions |
1 |
4026397578775 |
2,06 kg |
29cm x 15cm x 15cm |
|
Μηχανή καπνού 1100 watt με έξοδο 7000 (cu.ft/min) και χρόνο προθέρμανης 8 λεπτά, Automatic circuit cut-off , ADJ?s Electronic Thermo Sensing (ETS)
Product: Fog Fury 2000
The ADJ Fog Fury 2000 is a 1100W portable, high output fog machine with new advances in technology. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance pump system for optimum output. ADJʼs Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with no warm-up time between fog blasts.
The Fog Fury 2000 also has convenient features such as a LED heating indicator system that changes colors depending on whether the fogger is heating up, ready to use, or if the fog fluid is low.
This fogger produces 7000 cubic feet of fog per minute, has an external tank with a 2.5 Liter capacity, and has an 8 minute warm-up time. This machine uses water-based fog fluid only.
Specifications:
• 1100W portable, high output Fog Machine
• High performance pump for optimum output
• ADJʼs Electronic Thermo Sensing (ETS) technology to always maintain optimum heat levels with no warm-up times between fog blasts
• Automatic circuit cut-off to protect pump if fog fluid tank runs dry
• Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging
• LED heating indicator system in tank: Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low
• Fog Output: 7000 (cu.ft/min)
• Warm-up time: 8 min.
• External fog fluid tank: 2.5 Liter
• Single yoke to mount on a wall or from trussing bracket
• Convenient carrying handle
• Includes On/Off wired remote control with 25ft./8M cable
• Heater: 1100W
• Power Consumption: 1200W max
• Power: AC 120V/60Hz or 230V/50Hz (non switching)
• Dimensions (LxWxH): 16.75” x 11.75” x 9” / 421 x 295 x 224mm
• Weight: 16 lbs. / 6.89 kg.
• Only use high quality, water-based fog fluid
|
MDG MAX 5000 HO APS Smoke Machine 2815W
Extremely powerful,adjustable fog output Virtually noiseless, with the finest fog and the longest hanging times Automatic Purging System (APS) to prevent build-up and clogging Compatible with remote control timer and DMX interface Detachable remote control and 8 m (26 ft) cable included
Powerful fog output (up to 85 m3/3,000 ft3 per minute) Portability option
TECHNICAL DATA MAX 5000APSH.O. Maximum fog output 445 m3 (3,000 ft3) per minute Fluid consumption 4.5 L (34 oz) per hour at 2.76 bar (40 psi) Gas type N2 only Gas consumption 5 kg (11 lb) per hour at 2.76 bar (40 psi) Reservoir capacity 6.5 L (0.66 US gallon) Automatic Purging Standard feature System (APS) Fog colour Pure white Particle size 0.5-0.7 microns Warm-up time (maximum) 8 minutes Fluid type MDG Neutral Fluid (M.S.D.S. available on request) Operating voltage 115 or 230 VAC, 50/60 Hz Power consumption 2815 W Dimensions Length 68.5 cm (24?) Width 28 cm (7?) Height 30 cm (12?) Weight 33 kg (43 lb) Shipping weight 44 kg (97 lb) (with flight case) Approval CE approved, CSA and UL pending |
Z-80 with Wireless Remote
UK Version
• Z80 MK2 included wireless remote
• UK power connector
Technical Info
Power supply: AC 230/240 V – 50/60 Hz
Heater: 700 Watt
Output: 2500 cu. ft/min
Tank capacity: 0,8 L
Fluid consumption rate: 125 min/ L
Included remote: FC-5
Optional remote: FC-4
Dimensions: 330 x 160 x 130 mm (LxWxH)
Weight: 4,0 kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.