MASTER AUDIO CM805SW Boundary Microphone για Συνέδρια Εκκλησίες Λευκό

Πυκνωτικό μικρόφωνο SENNHEISER, 40Hz-20kHz. Με διακόπτη ON/ΟFF.

Τύπος κάψας : σούπερ - καρδιοειδές
Ευαισθησία σε ελεύθερο πεδίο, χωρίς φορτίο : (1kHz) 3 mV/Pa
Μέγιστη Στάθμη Εντασης : 150 dB
Αντίσταση : 200 Ohm
Τερματισμένη αντίσταση : 1000 Ohm
Διαστάσεις : d 47 x 193 mm
Βάρος : w/o cable 311 g
Απόκριση συχνότητας : 40.....20000 Hz
Phantom powering : 12 - 48 V

Κάψα elecret σούπερ - καρδιοειδής, 40Hz-20kHz

Τύπος κάψας : σούπερ - καρδιοειδής 
Ευαισθησία σε ελεύθερο πεδίο, χωρίς φορτίο (1kHz) : 10 mV/Pa +- 2,5 dB
Αντίσταση : 200 Ohm (K6)
Τερματισμένη αντίσταση : 1000 Ohm (K6)
Σχετικό επίπεδο θορύβου : 20 dB
Διαστάσεις : d 44 x 131 mm
Βάρος :

Πυκνωτικό μικρόφωνο, καρδιοειδές, επανέκδοση του θρυλικού C451EB+CK1, ευαισθησία 9MV/PA, απόκριση συχνότητας 20Ηz-20kΗz, μέχρι 155 dΒ MAX SPL, 3 επιλογές προευαισθησίας, 2 επιλογές bass-cut filters. Πλήρως θωρακισμένο από ηλεκτρομαγνητικές παρεμβολές. Περιλαμβάνεται βαλίτσα μεταφοράς και αντιανεμικό. Κατάλληλο για studio recording, ιδανικό για σήματα πλούσια σε μεταβατικά όπως drums, percussions και overhead χρήσεις.
3 ΕΤΗ ΕΓΓΥΗΣΗ

Specification

Polar pattern: cardioid
Frequency range: 20?20,000 Hz
Sensitivity: 9 mV/Pa (-41 dBV re 1 V/Pa)
Max. SPL for 0.5 % THD: 135/145/155 dB SPL (-0/-10/-20 dB)
Equivalent noise level: 18 dB-A to DIN 45 412
Signal/noise ratio (A-weighted): 76 dB
Preattenuation pad: switchable, 0, -10,-20 dB Bass cut filter: switchable to flat or 12 dB/octave at 75 Hz or 150 Hz
Electrical impedance: Recommended load impedance: >1.000 Ohms
Power requirement: 9?52 Volt phantom power to DIN 45 596/IEC 268-15
Current consumption: Connector: 3-pin male XLR
Finish: satin nickel plated
Size: dia.: 190 mm (0.7 in.); length: 160 mm (6.3 in.)
Net/shipping weight: 125/760 g (4.4 oz./1.7 lbs.)
Standard accessories: W 90 windscreen, SA 40 stand adapter

 Όμοιο με C 411PP αλλά με βύσμα mini XLR για χρήση με το B 29L τροφοδοτικό μπαταρίας, το MPA III L εξωτερικό phantom power και όλα τα AKG WMS bodypack transmitters.

AKG C411L Ultralight Condenser Microphone

• Ultra-light vibration pickup
• Condenser transducer in sealed enclosure
• Cable with lockable miniature XLR connector

Weighing only 18 grams (0.6 oz.), this ultra-light condenser pickup is ideal for acoustic guitar, mandolin, violin, and most other stringed instruments. The C 411 will give a clear and uncolored sound without changing the balance of the instrument. Attaching the C 411 on or near the bridge or anywhere else on the instrument is easy with the included non-marring, reusable, solventfree adhesive compound.

C 411 L: With mini XLR connector for use with B 29 L battery operated power supply, MPA V L external phantom power adapter, or AKG WMS bodypack transmitters.

The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.

The VP88 uses a mid-side (M-S) configuration. One microphone cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other microphone cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image seperation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production. Switches on the top of the microphone control output mode, stereo imaging, low-frequency rolloff settings, and battery on/off.

The VP88 can operate on phantom power or an internal 6V battery. The VP88 is supplied with a multi-connector "Y-splitter" cable, foam windscreen, swivel stand adapter, 6-volt battery, and zippered carrying/storage bag. Optional accessories include an isolation mount, a 7.6 m (25 ft) microphone extension cable, a phantom power supply, and a 4.3 m (14 ft) microphone stand.

• Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
• Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available
• Mono compatibility ideal for broadcast applications
• 40 to 20,000 Hz frequency response
• Low noise and distortion
• Wide dynamic range
• Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
• Operates on phantom power or a 6V camera battery
• LED power indicator
• Internal shock mount for reduced stand vibration and handling noise
• Built-in "pop" screen
• Includes windscreen, swivel adapter, and Y-cable