MC2 Audio E45 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x2500W 4ohm 230V

The E Series is a range of lightweight, high-power switch mode amplifiers designed to the highest standards of reliability and sound quality. Developed for the touring market, E Series retain the sonic integrity of the benchmark MC and T Series amplifiers, without the physical weight.

The switch mode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new, sophisticated MC² Audio 'intelligent' limiter. The E15, E25, E45 and E4-75 feature MC² Audioʼs proprietary current driven output stages for ultra-high definition sound, delivered over the entire audio bandwidth.

The E90 and the E100 are Class D amplifiers designed to meet the demands for higher power with increased efficiency whilst still maintaining the renowned MC² Audio sonic qualities and unsurpassed reliability.

All MC² Audio products are covered by a 5 year warranty.


Number of Channels:  2

Frequency Response:

20Hz to 20kHz
(+/- 0.3dB)


Output Power: (per channel)

8 ohms     1250W     
4 ohms     2500W     
2 ohms     4200W    

Output Power: (bridged)

8 ohms 5000W
4 ohms 8400W

THD%: (@1dB below max output)

@ 1kHz

Number of Channels: 2

Output Power: (per channel)

8 ohms     1000W
4 ohms  1850W
2 ohms  N/A


Output Power: (bridged)

8 ohms 3700W
4 ohms N/A


THD%: (@1dB below max output)

@ 1kHz 

Dynacord H 5000

 
The power amp H5000 is part of Dynacord´s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with "floatingË switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications.  

 
Dynacord H 5000 features:

    2x 1500 Watt / 8 Ohm
    2x 2500 Watt / 4 Ohm
    2x 3500 Watt / 2 Ohm
    Cooling: Front-to-Rear, 5-stage-fans
    Dimensions (WxHxD): 483 x 88.1 x 498 mm
    Weight: 14.5 kg
    Protections:
    Audio limiters
    High temperature
    DC
    HF
    Short Circuit
    Back-EMF
    Peak current limiters
    Inrush current limiters
    Turn-on delay
    Mains Circuit Breaker Protection
    Mains Overvoltage Protection

Επαγγελματικός τελικός ενισχυτής 2x1200W RMS @ 4Ω, 2x800W RMS @ 8Ω. Διαθέτει εισόδους 3-pin XLR θυληκο και 1/4" TRS, balanced, εξόδους speakon. Τέλος διαθέτει περιστροφικούς encoders ακριβείας για ελεγχό παραμέτρων Gain και DSP . Προστασίες short circuit, open circuit, υπερθέρμανσης, RF και DC faults. Διαστάσεις (HxWxD) 89 mm ? 483 mm ? 259 mm - 6kg.

Απαιτήσεις ισχύος: 1/8 ισχύος στα 4Ω

• -100V AC: 6.2A
• -120V AC: 5.6A
• -230V AC: 3.2A

Dynamic Headroom (4Ω): 2.73 dB
Damping Factor (8Ω): 100
Απόκριση Συχνότητας (20 Hz-20 kHz): +0.7 dB, -0.8 dB
Αντίσταση εισόδου: 20 kΩ (balanced), 10 kΩ (unbalanced)
Maximum Input Level: +23.5 dBu

Συνδέσεις ανά κανάλι:

• 3-pin XLR θυληκο
• 1/4" TRS, balanced
  
  Υπάρχει επιπλεόν είσοδος USB type B, χρήση μόνο για την ενημέρωση του λογισμικού του ενισχυτή.
  

Έξοδοι ανά κανάλι :

• Speakon binding posts
• Speakon pinout: Channel A on 1+, 1-; Channel B on 2+, 2; Channel B on 1+, 1-

Προστασίες ενισχυτή και υπερφόρτωσης: short circuit, open circuit, υπερθέρμανσης, RF και DC faults.

'Ελεγχοι:

• 2 x Περιστρεφόμενοι encoders
• 3 x κουμπιά λειτουργίας (HOME, ENTER, EXIT)

Ενδείξεις:

• Power-On: Μπλε LED
• Σήμα: 2 x Πράσινο LED
• Clip: 2 x Κόκκινο LED

Λειτουργίες DSP:

• High-pass filter, 4th-order Linkwitz-Riley, adjustable frequency 20 Hz to 4 kHz
• Low-pass filter, 4th-order Linkwitz-Riley, adjustable frequency 60 Hz to 4 kHz
• 4-band parametric EQ with variable frequency, gain, and bandwidth
• Peak limiter with power, agressiveness, and impedance selection
• Delay 50 msec max.

• Διαστάσεις: 89 × 483 × 259 mm 2U
• Βάρος: 6 kg (net), 7.8 kg (shipping)