Αυτοενισχυόμενο ηχείο monitor Coaxial με μονάδα woofer 15'' και 3'' Titanium driver . Μαγνητικά θωρακισμένο. Απόκριση συχνότητας 45Hz - 20KHz. Διαθέτει ενισχυτή biamp (HF : 500Watt, LF : 500Watt). Με Ψηφιακό DSP Processor με επιλογή 5 διαφορετικών Preset Είσοδο 2 x XLR. Βάρος: 39,5Kg Διαθέσιμο σε : Μαύρο και Πράσινο / Τιμή τεμαχίου
features:
2-way 15 "active coaxial / bass reflex studio monitor
15 "precision woofer 300W
3 "Titanium tweeter 100W
Frequency response: 45Hz - 20kHz
SPL: 118dB at 2m
DSP controller: 2 channel, 96kHz / 48 bit, High Quality AD / DA converters
Room EQ Adjustment Presets
1KW latest Class D Amplifier
S / N Ratio (A weighted) RF / LF:> 90dB / 95dB
THD + N @ 1W: 0.003% +
Input Connectors: 2 x XLR balanced
Input Impedance: 2.2 K Ohms
Weight: 39.5 Kg
Dimensions: W700xH450mmxD465mm
The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.
Power ON / OFF LED
Standby / ON LED
Audio Clip LED
Woofer :
5" Focal drive unit, Polyglass cone
Tweeter :
Aluminum/Magnesium inverted dome Focal tweeter
Shielding :
Integral by cancellation magnet
Construction :
Reinforced and damped Aluminum cabinet
Finish :
Black powder cabinet
Dimensions with spikes :
289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“)
Dimensions with table stand :
299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“)
Net weight :
7.7kg - (17lb)
Μonitor 2 δρόμων-2ενισχυτών near field, woofer 5.25? SFG?, tweeter 1"
τιτανίου προσαρμοσμένο σε eos waveguide, 100WRMS για LF and
50WRMS για HF, 70Ηz?20kΗz +1/-2dΒ, >109dB SPL peak. XLR, RCA
inputs. Δυνατότητα πολλαπλών ρυθμίσεων και συνεργασία με JBL RMC
calibration kit. Μαγνητική θωράκιση. 7,7kg., (173W x 269H x 241D mm).
ΤΙΜΗ ΤΕΜΑΧΙΟΥ
S2X
The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.
The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
Review at a glance: "Sonic sensation“
“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)
“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)
Woofer
Number
1
Basket Ø
7.5" (186 mm)
Voice coil Ø
2" (50 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
250 W / 350 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)
-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz
0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz
±4 dB (1 dB steps)
Low Shelf EQ
±4 dB (1 dB steps)
Tweeter gain
±2 dB (0.5 dB steps)
Input connectors
Analog
XLR
Digital (optional)
AES/EBU / SPDIF / word clock
General data
Panel
Front
Frequency response
35 Hz - 50 kHz
THD > 80 Hz
≤0.8 %
Long term output
≥110 dB
Max. peak
≥120 dB
Crossover frequencies
2200 Hz
Input impedance
10 KOhm
Weight
23.8 lb (10,8 kg)
Magnetically shielded
Optional
Height x Width x Depth
14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
Mackie HR624 MK2 ενεργό monitor δύο δρόμων ιδανικά για χρήση σε studio, με εξαιρετικά γραμμική απόκριση συχνότητας. Kαμπίνα MDFμε εσωτερική αντιστήριξη.
Χαρακτηριστικά:
6.7" high-precision, low-distortion LF driver
1" titanium dome ferrofluid-cooled tweeter
Optimized waveguide for wide, even tone
Twin FR Series amps: 100W LF, 40W HF
Cast aluminum Zero Edge baffle minimizes diffraction
Internal damping eliminates midrange artifacts
Acoustic Space Control, LF roll-off, HF shelf controls
Balanced XLR, TRS, and unbalanced RCA inputs
OmniMount for easy wall or ceiling placement
THX pm3 certified for surround applications
Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.