NUMARK CS-1 Kεφαλή Πικάπ

69.00 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 1-3 Ημ. Διαθέσιμο 1-3 Ημ. Κωδικός προϊόντος: H99NU00005 Κατηγορία:
Κεφαλή πικάπ ιδανικό για μουσική και DJ δραστηριότητες, καθώς διαθέτει full-range απόκριση συχνότητας (20 to 22,000Hz), στρογγυλή βελόνα,  high output και βάρος 18 gr.

 

Διαβάστε περισσότερα

Κεφαλή πικάπ ιδανικό για μουσική και DJ δραστηριότητες, καθώς διαθέτει full-range απόκριση συχνότητας (20 to 22,000Hz), στρογγυλή βελόνα,  high output και βάρος 18 gr.

Βάρος 0.18 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “NUMARK CS-1 Kεφαλή Πικάπ”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

NUMARK CS-1 Kεφαλή Πικάπ removeORTOFON MC 1 Turbo ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeORTOFON OM 5E ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeORTOFON 2M Black ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ Τύπου Nude Shibata removeORTOFON Concorde Scratch TWIN removeORTOFON CONCORDE DIGITRACK Twin Κεφαλή remove
NameNUMARK CS-1 Kεφαλή Πικάπ removeORTOFON MC 1 Turbo ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeORTOFON OM 5E ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeORTOFON 2M Black ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ Τύπου Nude Shibata removeORTOFON Concorde Scratch TWIN removeORTOFON CONCORDE DIGITRACK Twin Κεφαλή remove
Image
SKUH99NU00005MC1TurboOM5E2MBlackConcordeScratchTWINCONCORDE DIGITRACKTwin
Rating
Price 69.00 με ΦΠΑ 24%199.00 με ΦΠΑ 24% 74.34 με ΦΠΑ 24%599.00 με ΦΠΑ 24%204.00 με ΦΠΑ 24%223.00 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 2 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 2 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Διαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Κεφαλή πικάπ ιδανικό για μουσική και DJ δραστηριότητες, καθώς διαθέτει full-range απόκριση συχνότητας (20 to 22,000Hz), στρογγυλή βελόνα,  high output και βάρος 18 gr.

The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile.  The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges.  The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.

Technical data  
Output voltage at 1000 Hz, 5cm/sec. 3,3 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 22 dB
Channel separation at 15 kHz > 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response FIM distortion at recommended 20-20.000 Hz + 4 / - 1 dB
Tracking ability at 315Hz at recommended tracking force *) > 65 µm
Compliance, dynamic, lateral 13 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,8-2,2 g (18-22 mN)
Tracking force, recommended 2 g (20 mN)
Tracking angle 20°
Internal impedance, DC resistance 100 Ohm
Recommended load impedance 47 kOhm /
Cartridge body material Noryl
Cartridge colour Black
Cartridge weight 4,1 g

The OM 5E is a magnetic cartridge (MM) with an elliptical shaped stylus that provides balanced and distortion-free playback for general purpose applications.

 

TECHNICAL DATA  
Output voltage at 1000 Hz, 5cm/sec. 4 mV
Channel balance at 1 kHz 2 dB
Channel separation at 1 kHz 22 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 Hz ± 2 dB
Tracking ability at 315Hz at recommended tracking force *)
65 µm
Compliance, dynamic, lateral 20 µm/mN
Stylus type Elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 1,5-2,0 g (15-20 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Internal impedance, DC resistance 750 Ohm
Internal inductance 450 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 200-600 pF
Cartridge colour, body/stylus Black/Black
Cartridge weight 5 g
Replacement stylus unit Stylus 5 E
*) Typical value

 

2M Black - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series. Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality.

2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.
The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet.

The 2M Black is the new moving magnet flagship from Ortofon. The 2M black is graced with a Shibata diamond stylus – the same diamond as on the acclaimed MC Jubilee. Its slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information. Users of the 2M Black will enjoy the benefit of impeccable sound quality, along with reduced record & stylus wear and reduced distortion and phase error as a result of the diamondʼs improved tracking geometry.

The cartridge body used for the 2M Black is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances. The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.


TECHNICAL DATA

Output voltage at 1000 Hz, 5cm/sec.5 mV
Channel balance at 1 kHz1 dB
Channel separation at 1 kHz26 dB
Channel separation at 15 kHz15 dB
Frequency range at - 3dB20-31.000 Hz
Frequency response20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force80 µm
Compliance, dynamic, lateral22 µm/mN
Stylus typeNude Shibata
Stylus tip radiusr/R 6/50 µm
Tracking force range1,4-1,7g (14-17 mN)
Tracking force, recommended1,5 g (15 mN)
Tracking angle20°
Internal impedance, DC resistance1,2 kOhm
Internal inductance630 mH
Recommended load resistance47 kOhm
Recommended load capacitance150-300 pF
Cartridge colour, body/stylusBlack/Black
Cartridge weight7,2 g
Replacement stylus unit2M Black


For DJs that require increased tracking ability, the Scratch is up to the task. Featuring a reinforeced rubber suspension, DJs don't need to worry about compromising sound quality and stylus life when working with higher tracking forces. With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

This Ortofon Concorde Set contains;
- 2x Ortofon Concorde Scratch Element
- Ortofon Needle Brush
- All parts come in a special Ortofon box casing

Features:

  • Output Voltage at 1000Hz, 5cm/sec. : 7mV
  • Channel Balance at 1 Khz : 1,5dB
  • Channel Seperation at 1 Khz : 25dB
  • Channel Seperation at 15 Khz : 15dB
  • Frequency Range at 3db : 20-20.000Hz
  • Stylus Type : Spherical
  • Internal Impedance : 750 Ohm
  • Tracking Force recommended : 4,0G(40mN)
  • Cardridge Weight : 18,5 gram
  • Replacement Stylus Unit : Scratch
  • Professional plug-in catrridge designed for use Serato Scrach Live and other digital interface formats using time coded vinyl. Set includes two cartridges with two styli, cleaning brush and carry case.

    ORTOFON CONCORDE DIGITRACK KIT WITH 2 STYLI

    Ortofon\'s Red Digitrack Cartridge is designed specifically for coded vinyl. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for coded vinyl with low wear, high output and the best mix and scratch ability.

    With the introduction of the DigiTrack cartridge, Ortofon continues to break new ground. Finally, technology has become an art. The Digitrack is the perfect marriage of ease and function. With the advent of new computer technology, a DJ can now manipulate MP3\'s with the style and feel of a turntablist and the tradition of a turntable. Introducing the world\'s first needle designed specifically for code vinyl. Low wear, high output and no more lugging around crates of records.

    Our engineers spent hundreds of hours studying the characteristic of time coded vinyl from such products as Serato Scratch, FinalScratch, Virtual DJ, PCDJ Scratch and many others. They\'ve designed a product that will pick up all the coded information while leaving minimal wear on your record. Combine superior output and tracking ability and you\'ve got a cartridge that will perform flawlessly every time. Ideal for both mixing and scratching. The DigiTrack will keep you in the groove all night long.

    TECHNICAL DATA CONCORDE DIGITRACK

    Output voltage at 1000 Hz,
    5cm/sec.
    8 mV
    Channel balance at 1 kHz
    1,5 dB
    Channel separation at 1 kHz
    22 dB
    Channel separation at 15 kHz
    15 dB
    Frequency range
    20-20.000 Hz
    Frequency response
    20-18.000 Hz -3 /- 2dB
    FIM distortion at recommended tracking force,
    DIN 45.542
    < 1%
    Tracking ability at 315Hz at
    recommended tracking force
    80 m
    Compliance, dynamic, lateral
    12 m/mN
    Stylus type
    Spherical
    Stylus tip radius
    R18
    Equivalent stylus tip mass
    0,6 mg
    Tracking force range
    2-4 g (20-40 mN)
    Tracking force, recommended
    3,0 g (30 mN)Tracking angle 20Internal impedance, DC resistance

    1325 Ohm
    Internal inductance
    765 mH
    Recommended load resistance
    47 kOhm
    Recommended load capacitance
    200-600 pF
    Cartridge colour, body/stylus
    Red/Red
    Cartridge weight
    18,5 g
    Replacement stylus unit
    Digitrack

    Weight0.18 kg0.40 kg0.05 kg0.70 kg0.50 kg0.50 kg
    DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
    Additional information
    Βάρος 0.18 kg
    Βάρος 0.40 kg
    Βάρος 0.05 kg
    Βάρος 0.70 kg
    Βάρος 0.50 kg
    Βάρος 0.50 kg