OMNITRONIC XPA-1200 Class AB Ενισχυτής 2x610W RMS 4Ω

Original price was: €446.39.Current price is: €421.60. με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: 4026397593907
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Κατόπιν Παραγγελίας Κατόπιν Παραγγελίας Κωδικός προϊόντος: XPA-1200 Κατηγορία:
10451034 OMNITRONIC XPA-1200 Class AB PA amplifier with limiter, 2 x 610 W RMS (4 ohms), 2 x 420 W RMS (8 ohms) 2 operating modes can be selected (stereo or bridged) 2 level controls Each channel with LED for activated protective circuit (protect) and output meter with clip LED Signal inputs via XLR or […]

 

Διαβάστε περισσότερα

  • 10451034 OMNITRONIC XPA-1200 Class AB PA amplifier with limiter, 2 x 610 W RMS (4 ohms), 2 x 420 W RMS (8 ohms)
    • 2 operating modes can be selected (stereo or bridged)
    • 2 level controls
    • Each channel with LED for activated protective circuit (protect) and output meter with clip LED
    • Signal inputs via XLR or 6.3mm jack connectors
    • Speaker outputs via lockable speaker jacks and pairs of screw terminals
    • Additional Speaker plug for 8-ohm bridge operation
    • Class AB circuitry
    • Highly efficient Air flow from front to rear
    • The device is cooled by temperature-controlled fan
    • (19″) 48.3 cm rack installation 2 U
    • For application areas such as: Clubs/dancing school; Installation; mobile use; mobile djs / entertainer; restaurants, bars and hotels; Rental; sports centres/gyms

    Package contents

    • 1 x amplifier, 1 x user manual, 1 x power cord, 4 x foot, 4 x screw
    Power supply: 115/230 V AC, 50/60 Hz
    Power consumption: 800 W 1/8 power
    Output power: 2 x 610 W RMS (4 ohms)
    2 x 420 W RMS (8 ohms)
    1200 W RMS bridged (8 ohms)
    Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
    Frequency range: 20 – 20000 Hz
    S/N ratio: >95 dB
    THD: <0,5 % at 1 kHz
    Cooling: 1 x temperature-controlled fan , Air flow from front to rear
    Impedance: Input: 20 kOhm , bal.
    Input: 10 kOhm , unbal.
    Circuitry: Class AB
    Slew rate: >20 V/µs
    Damping factor: >350
    Control elements: Power switch, level control per channel, groundlift selector, limiter selector, mode switch (stereo/bridged)
    Controls: Short-circuit; overheat; DC voltage; power on/off transients; softstart
    Status LED: Power, level meter, clip, bridged, protect
    Connections: Input: line via 2 x 3-pin XLR
    Input: line via 2 x 6.3 mm jack socket (mono) mounting version
    Output: speaker via 2 x speaker built-in socket (F)
    Output: speaker via screw terminal
    Input: Speaker (bridge) via 1 x speaker built-in socket (F)
    Output: Speaker (bridge) via screw terminal
    Input sensitivity: 1,4 V
    Max. level: Input: +21 dBV
    Input: +9 V
    Housing design: (19″) 48.3 cm rack installation 2 U
    Dimensions: Width: 48,3 cm
    Depth: 35,4 cm
    Height: 8,9 cm
    Weight: 11,90 kg
Βάρος 12.5 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “OMNITRONIC XPA-1200 Class AB Ενισχυτής 2x610W RMS 4Ω”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

OMNITRONIC XPA-1200 Class AB Ενισχυτής 2x610W RMS 4Ω removeDYNACORD SL-2400 / 230V Power Amplifier 2400 Watts removeINTER-M V-2000 Τελικός ενισχυτής 2Χ550W/4Ω, 2Χ300W/8Ω, 2Χ900W/2Ω removeCROWN XLS-2000 Tελικός ενισχυτής 2x1050W/2Ω-2x650W/4Ω-2x375W/8Ω removeQSC PL-325 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x850W RMS @4Ω, 2x1250W RMS @2Ω removeRCF ED1100 EXTENDED DYNAMIC STEREO POWER AMPLIFIER 1100W , 2 IN remove
NameOMNITRONIC XPA-1200 Class AB Ενισχυτής 2x610W RMS 4Ω removeDYNACORD SL-2400 / 230V Power Amplifier 2400 Watts removeINTER-M V-2000 Τελικός ενισχυτής 2Χ550W/4Ω, 2Χ300W/8Ω, 2Χ900W/2Ω removeCROWN XLS-2000 Tελικός ενισχυτής 2x1050W/2Ω-2x650W/4Ω-2x375W/8Ω removeQSC PL-325 ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ 2x850W RMS @4Ω, 2x1250W RMS @2Ω removeRCF ED1100 EXTENDED DYNAMIC STEREO POWER AMPLIFIER 1100W , 2 IN remove
Imagexpa-1200 xpa1200 amplifier omnitronic 2x610w ab stereo
SKUXPA-1200E009262V-2000XLS-2000PL-325ED1100
Rating
Price Original price was: €446.39.Current price is: €421.60. με ΦΠΑ 24% Original price was: €1,394.64.Current price is: €1,245.00. με ΦΠΑ 24% Original price was: €626.20.Current price is: €504.06. με ΦΠΑ 24% Original price was: €545.60.Current price is: €454.00. με ΦΠΑ 24%1,684.13 με ΦΠΑ 24% Original price was: €954.79.Current price is: €716.10. με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 5 απομένουν σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Εξαντλημένο

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 5 απομένουν σε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΕξαντλημένοΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Διαβάστε περισσότερα

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content
  • 10451034 OMNITRONIC XPA-1200 Class AB PA amplifier with limiter, 2 x 610 W RMS (4 ohms), 2 x 420 W RMS (8 ohms)
    • 2 operating modes can be selected (stereo or bridged)
    • 2 level controls
    • Each channel with LED for activated protective circuit (protect) and output meter with clip LED
    • Signal inputs via XLR or 6.3mm jack connectors
    • Speaker outputs via lockable speaker jacks and pairs of screw terminals
    • Additional Speaker plug for 8-ohm bridge operation
    • Class AB circuitry
    • Highly efficient Air flow from front to rear
    • The device is cooled by temperature-controlled fan
    • (19") 48.3 cm rack installation 2 U
    • For application areas such as: Clubs/dancing school; Installation; mobile use; mobile djs / entertainer; restaurants, bars and hotels; Rental; sports centres/gyms

    Package contents

    • 1 x amplifier, 1 x user manual, 1 x power cord, 4 x foot, 4 x screw
    Power supply: 115/230 V AC, 50/60 Hz
    Power consumption: 800 W 1/8 power
    Output power: 2 x 610 W RMS (4 ohms) 2 x 420 W RMS (8 ohms) 1200 W RMS bridged (8 ohms)
    Power connection: Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
    Frequency range: 20 - 20000 Hz
    S/N ratio: >95 dB
    THD: <0,5 % at 1 kHz
    Cooling: 1 x temperature-controlled fan , Air flow from front to rear
    Impedance: Input: 20 kOhm , bal. Input: 10 kOhm , unbal.
    Circuitry: Class AB
    Slew rate: >20 V/µs
    Damping factor: >350
    Control elements: Power switch, level control per channel, groundlift selector, limiter selector, mode switch (stereo/bridged)
    Controls: Short-circuit; overheat; DC voltage; power on/off transients; softstart
    Status LED: Power, level meter, clip, bridged, protect
    Connections: Input: line via 2 x 3-pin XLR Input: line via 2 x 6.3 mm jack socket (mono) mounting version Output: speaker via 2 x speaker built-in socket (F) Output: speaker via screw terminal Input: Speaker (bridge) via 1 x speaker built-in socket (F) Output: Speaker (bridge) via screw terminal
    Input sensitivity: 1,4 V
    Max. level: Input: +21 dBV Input: +9 V
    Housing design: (19") 48.3 cm rack installation 2 U
    Dimensions: Width: 48,3 cm Depth: 35,4 cm Height: 8,9 cm
    Weight: 11,90 kg

Solid DYNACORD amplifier technology at highly competitive prices.
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.

Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 1800 W, 4 Ω - 1200 W, 8 Ω - 750 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 3400 W, 4 Ω - 1800 W, 8 Ω - 950 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 3600 W, 8 Ω - 2400 W Input Sensitivity, rated power @ 8 Ω, 1 kHz +6.6 dBu (1.66 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class H Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 17.7 kg (39.0 lbs)

Όμοια χαρακτηριστικά με τον V-2000 αλλά με ισχύ 2Χ550W/4Ω, 2Χ300W/8Ω, 2Χ900W/2Ω, bridge 1900W/4Ω, 10,5Kg.

Minimum Guaranteed Power
per channel, both channels driven
XLS 1000
XLS 1500
XLS 2000
XLS 2500
Stereo, 2 ohms (per ch.)550W775W1050W1200W
Stereo, 4 ohms (per ch.)350W525W650W775W
Stereo, 8 ohms (per ch.)215W300W375W440W
Bridge-Mono, 8 ohms700W1050W1300W1550W
Bridge-Mono, 4 ohms1100W1550W2100W2400W

Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.

XLS

  • XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
  • Integrated PureBand™ Crossover System for better performance and control
  • Peakx™ Limiters provide maximum output while protecting your speakers
  • XLR, 1/4“, RCA inputs provide outstanding flexibility
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
  • Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

XLS Series with Integrated DriveCore™ Technology
The XLS Series of power amplifiers from Crown define the standard for live sound systems with unmatched performance, technology, and affordability.

This high-performance line consists of four models each providing enormous power and flexibility thanks to the integrated DriveCore™ Technology, PureBand™ Crossover System and Peakx™ limiters. And weighing in at only 10 lbs or less, they provide the ultimate in lightweight portability.

Generating chest-thumping lows and crystal clear highs, the four models in the series – the XLS1000, XLS1500, XLS2000, and XLS2500 – are engineered to meet any demanding audio requirements – reliably and within budget.

Every XLS Series amplifier is backed by Crown's unequaled Three-Year, No-Fault, Fully Transferable Warranty that covers everything.

With over five decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the Crown XLS Series. They are a powerful argument for performance, flexibility, and value!

Integrated DriveCore™ Technology
Class D amplifiers are notable for extraordinarily high efficiency and being well suited for driving difficult reactive loads such as subwoofers. However, their performance can suffer impaired performance on marginal and unstable AC line supplies.

To overcome this obstacle, Crown engineers developed DriveCore™ Technology – a proprietary hybrid analog-digital integrated circuit (IC) developed with Texas Instruments that drives the "front end" of the Class D output stage. Over 60 years of Crown's design knowledge and experience went into the development of this technology resulting in truly remarkable benefits.

DriveCore™ Technology provides an extremely wide-tolerance with regards to sagging or "dirty" AC line conditions providing consistent performance without affecting audio quality. This means that your performance will not be compromised by fluctuating generator power or overloading by lighting rigs, backline gear, etc.

In addition, DriveCore™ Technology's patented feedback and PWM modulation circuits enable fast recovery on peak transients, accurate reproduction of low-level detail, and precise tracking of low-frequencies at high power levels for maximum subwoofer output.

Advanced Switched-Mode Power Supply
This advanced power supply is highly efficient and optimized for maximum power transfer from the AC line through the Class D output stage to the loudspeakers. A benefit to this is substantial weight reduction when compared to older 60Hz transformer-based power supplies. All four models in the line weigh 10 pounds or less with no compromise in performance. This makes the XLS Series the benchmark for high performance lightweight portability.

PureBand™ Crossover System
The PureBand™ Crossover System in the XLS Series adds an enormous amount of flexibility and performance to any system. With this system, the crossover frequency is completely variable allowing the choice of any crossover point between 50Hz and 3kHz on 1/12 octave centers. The use of 4th order Linkwitz-Riley filters provides steep slopes for a seamless transition between high and low drivers. And with four crossover modes to choose from providing the ultimate in flexibility, all of your system needs are covered:

  1. Crossover Mode (CH1=LPF, CH2=HPF) – When chosen, this mode enables a LowPass Filter on Channel 1 and a HighPass Filter on Channel 2 at the frequency chosen.

  2. LowPass Mode (CH1=LPF, CH2=LPF) – When chosen, this mode enables a LowPass Filter on both Channel 1 and Channel 1 at the frequency chosen.

  3. HighPass Mode (CH1=HPF, CH2=HPF) – When chosen, this mode enables a HighPass Filter on both Channel 1 and Channel 2 at the frequency chosen.

  4. Bridge Mode (LPF or HPF) – When the amplifier is put into Bridge-Mono, you are still able to use the crossover system and employ either a LowPass Filter or HighPass Filter at the frequency chosen.

All of the PureBand™ Crossover System settings can be fully configured quickly and easily from the front panel using the intuitive LCD interface.

Peakx™ limiters
Peakx™ limiters provide the ultimate in performance and protection for your entire system. This advanced algorithm was specifically developed and tuned to work with this amplifier and power-supply to achieve higher SPL will less audible artifacts. This means less distortion, less shutdowns, and maximum safe power delivered to your speakers. The Peakx™ limiters can be easily turned on or off by channel right from the front panel eliminating the need to be digging around in the back of the dark rack.

Sensitivity (for full rated power at 4 ohms)

1.4 Vrms

Frequency Response (at 1 watt, 20 Hz - 20 kHz)

+0 dB, –1 dB

Signal-to-Noise Ratio

Rated as dBr to full rated 8Ω power output (A-Weighted):
XLS1000 > 97 dB
XLS1500, XLS2000, XLS2500 > 103 dB

Damping Factor (8 ohm): 10 Hz to 400 Hz

> 200

Crosstalk (below rated 8Ω power)

At 1kHz: > 85dB
At 20kHz: >55dB

Input Impedance (nominal)

20 kΩ balanced, 10 kΩ unbalanced

Load Impedance

2 to 8 Ω per channel in Stereo
4 to 8 Ω in Bridge Mono

AC Line Voltage and Frequency Configurations Available (± 10%)

120 VAC 60 Hz
100 VAC 50/60 Hz
220 and 240 VAC 50 Hz

Ventilation

Flow-through ventilation from front to back

Cooling

Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation

Air Volume Requirements (per minute per unit)

80.15 ft³ (2.27 m³)

Integrated Processing

PureBand™ Crossover System

Crossover Filter: Linkwitz-Riley 24dB per Octave

Crossover Frequency Range: 50 HZ - 3 kHz

Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channels LPF), HighPass (both channels HPF), Bridge (LPF or HPF).

Peakx™ limiters: Channel independent clip limiter designed to
provide maximum output while protecting your loudspeakers

Input/Output

Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute signal to additional amplifiers.

Output Connectors: Two 4-Pole Speakon® Output Connectors
accept 2-pole or 4-pole Speakon® connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two speakers to a single Speakon connector.

One pair of back-panel binding posts per channel; accepts
banana plugs or bare wire. (European models do not accept
banana plugs.)

Construction

XLS1000/XLS1500: 8.12-Inch (20.62cm) depth
XLS2000/XLS2500: 10.35-Inch (26.29cm) depth

Dimensions

EIA Standard 19-inch (48.3-cm) rack mount width
(EIA RS-310-B), 3.5-inch (8.9-cm) height.
XLS 1000/1500: 7.7-inch (19.6-cm) depth.
XLS 2000/2500: 10.7-inch (27.2-cm) depth.

Net Weight , Shipping Weight

XLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
XLS1500: 8.6 lb (3.9kg), 13.6 lb (6.2 kg)
XLS2000: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)
XLS2500: 10.75 lb (4.9kg), 15.8 lb (7.1 kg)


Επαγγελματικός τελικός ενισχυτής για touring εφαρμογές με switching
τροφοδοτικό. Ισχύς 2x850W RMS @4Ω, 2x1250W RMS @2Ω, bridged
(mono) 2500W @4Ω. Διαθέτει εισόδους XLR (in και link out) και κλέμα
για ελεύθερο καλώδιο, εξόδους speakon, μπόρνες και θύρα data HD‐15
(15‐pin). Προστασίες short circuit, open circuit, υπερθέρμανσης, RF,
on/off muting, DC fault, active inrush limiting. 2U/19" rackmount.
Διαστάσεις (HxWxD) 89x483x397mm ‐ 10kg.

The high efficiency of the ED series enables maximum efficiency with low heat generation.

A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The 2U amplifier provides 2x550W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 550 Watt rms 
Power output stereo 8Ω:2 x 265 Watt rms 
Power output bridged 8Ω:1100 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 105 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 10 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Thermal, direct current, RFI, short circuit, transformer protection 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:10 A 
Power Consumption:2200 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:350 / 13.77 mm/inch 
Net Weight:15 / 33.06 Kg/Lbs 
SHIPPING INFORMATION
Package height:120 / 4.72 mm/inch 
Package width:540 / 21.25 mm/inch 
Package depth:475 / 18.07 mm/inch 
Shipping Weight:17 / 37.47 Kg/Lbs

 

Weight12.5 kg17.70 kg10.50 kg4.00 kg10.00 kg17.00 kgDimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔAdditional information
Βάρος 12.5 kg
Βάρος 17.70 kg
Βάρος 10.50 kg
Βάρος 4.00 kg
Βάρος 10.00 kg
Βάρος 17.00 kg