ORTOFON Concorde Elektro Twin Κεφαλή DJ

Καταργήθηκε

197.00 με ΦΠΑ 24%

Εξαντλημένο

CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Καταργήθηκε Καταργήθηκε Κωδικός προϊόντος: ConcordeElektroTwin Κατηγορία:
New model professional plug-in cartridge suited for general DJ use. The Elektro features improved construction and higher output. Kit includes two cartridges with two styli, cleaning brush and carry case. ORTOFON CONCORDE ELEKTRO KIT WITH 2 STYLI Ortofon has been a world leader in the DJ cartridge for many years now. Their new Elektro cartridge […]

 

Διαβάστε περισσότερα

New model professional plug-in cartridge suited for general DJ use. The Elektro features improved construction and higher output. Kit includes two cartridges with two styli, cleaning brush and carry case.

ORTOFON CONCORDE ELEKTRO KIT WITH 2 STYLI

Ortofon has been a world leader in the DJ cartridge for many years now. Their new Elektro cartridge is of the same standard as all their previous cartridges. The Elektro boasts an extremely robust sound, increased tracking ability and an output level over 7mv. To make this cartridge even more resistant against constant handling and heavy use, they have made the rubber suspension of the cantilever even more rigid against axial pull. This is a superb all round cartridge for all styles of music!! (Tone arm mounted).

The Ortofon DJ cartridges offer a clear visible cantilever with a red stylus point, which makes it easier to locate the stylus in the groove. This robust cartridge has been provided with a special telescopic cantilever construction consisting of a double tube design where the diameter of the outer tube at the same time has been raised from 0.7 to 0.8 mm.

. Output voltage at 1000 Hz, 5cm/sec. 7,5 mV
. Channel balance at 1 kHz 1,5 dB
. Channel separation at 1 kHz 25 dB
. Channel separation at 15 kHz 15 dB
. Frequency range at – 3dB 20-22.000 Hz
. Frequency response 20-15.000 Hz +3 / -2 dB
. FIM distortion at recommended tracking force, DIN 45.542 < 1%
. Tracking ability at 315Hz at recommended tracking force 80 µm
. Compliance, dynamic, lateral 6 µm/mN
. Stylus type Spherical
. Stylus tip radius R 18 µm
. Equivalent stylus tip mass 0,6 mg
. Tracking force range 3,0-5,0 g (30-50 mN)
. Tracking force, recommended 4,0 g (40 mN)
. Tracking angle 20°
. Internal impedance, DC resistance 750 Ohm
. Internal inductance 450 mH
. Recommended load resistance 47 kOhm
. Recommended load capacitance 200-600 pF
. Cartridge colour, body/stylus White/White

. Cartridge weight 5 g

Βάρος 0.50 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “ORTOFON Concorde Elektro Twin Κεφαλή DJ”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

ORTOFON Concorde Elektro Twin Κεφαλή DJ removeORTOFON OM D 25 mono ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeORTOFON Concorde Elektro Set removeORTOFON CONCORDE SERATO S-120 Set Κεφαλή removeORTOFON 2M Blue ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ Τύπου Nude Elliptical removeShure M92E ΚΕΦΑΛΗ ΠΙΚ ΑΠ P-mount too, Eliptical remove
NameORTOFON Concorde Elektro Twin Κεφαλή DJ removeORTOFON OM D 25 mono ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeORTOFON Concorde Elektro Set removeORTOFON CONCORDE SERATO S-120 Set Κεφαλή removeORTOFON 2M Blue ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ Τύπου Nude Elliptical removeShure M92E ΚΕΦΑΛΗ ΠΙΚ ΑΠ P-mount too, Eliptical remove
Image
SKUConcordeElektroTwinOMD25monoConcordeElektroSetConcorde S-120 Set2MBLUeM92E
Rating
Price197.00 με ΦΠΑ 24%75.00 με ΦΠΑ 24%129.00 με ΦΠΑ 24%160.00 με ΦΠΑ 24% 208.25 με ΦΠΑ 24% 146.31 με ΦΠΑ 24%
Stock

Εξαντλημένο

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Σε απόθεμα

AvailabilityΕξαντλημένοΣε απόθεμαΣε απόθεμαΣε απόθεμαΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Σε απόθεμα
Add to cart

Διαβάστε περισσότερα

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

New model professional plug-in cartridge suited for general DJ use. The Elektro features improved construction and higher output. Kit includes two cartridges with two styli, cleaning brush and carry case.

ORTOFON CONCORDE ELEKTRO KIT WITH 2 STYLI

Ortofon has been a world leader in the DJ cartridge for many years now. Their new Elektro cartridge is of the same standard as all their previous cartridges. The Elektro boasts an extremely robust sound, increased tracking ability and an output level over 7mv. To make this cartridge even more resistant against constant handling and heavy use, they have made the rubber suspension of the cantilever even more rigid against axial pull. This is a superb all round cartridge for all styles of music!! (Tone arm mounted).

The Ortofon DJ cartridges offer a clear visible cantilever with a red stylus point, which makes it easier to locate the stylus in the groove. This robust cartridge has been provided with a special telescopic cantilever construction consisting of a double tube design where the diameter of the outer tube at the same time has been raised from 0.7 to 0.8 mm.

. Output voltage at 1000 Hz, 5cm/sec. 7,5 mV
. Channel balance at 1 kHz 1,5 dB
. Channel separation at 1 kHz 25 dB
. Channel separation at 15 kHz 15 dB
. Frequency range at - 3dB 20-22.000 Hz
. Frequency response 20-15.000 Hz +3 / -2 dB
. FIM distortion at recommended tracking force, DIN 45.542 < 1%
. Tracking ability at 315Hz at recommended tracking force 80 µm
. Compliance, dynamic, lateral 6 µm/mN
. Stylus type Spherical
. Stylus tip radius R 18 µm
. Equivalent stylus tip mass 0,6 mg
. Tracking force range 3,0-5,0 g (30-50 mN)
. Tracking force, recommended 4,0 g (40 mN)
. Tracking angle 20°
. Internal impedance, DC resistance 750 Ohm
. Internal inductance 450 mH
. Recommended load resistance 47 kOhm
. Recommended load capacitance 200-600 pF
. Cartridge colour, body/stylus White/White

. Cartridge weight 5 g

Ortofon D 25 M Mono Cartridge Spherical Diamond

OM D 25 M Technical Data:

  • Output voltage at 1000 Hz, 5cm/sec.: 4 mV, Lateral (mono)
  • Channel balance at 1 kHz
  • Channel separation at 1 kHz
  • Channel separation at 15 kHz
  • Frequency range: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz +3 / - 2 dB
  • FIM distortion at recommended tracking force, DIN 45.542:
  • Tracking ability at 315Hz at recommended tracking force: > 70 µm
  • Compliance, dynamic, lateral: 7 µm / mN
  • Stylus type: Spherical
  • Stylus tip radius: R 25 µm
  • Equivalent stylus tip mass: 0,5 mg
  • Tracking force range: 2,0-3,0 g (20-30 mN)
  • Tracking force, recommended: 2,5 g (25 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 750 Ohm
  • Internal inductance: 450 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-600 pF
  • Cartridge colour, body/stylus: Black/Black
  • Cartridge weight: 5 g
  • Replacement stylus unit: Stylus D 25 M
  • Features

    • 1 System
    • 1 Replacement Stylus
    • Small brush
    • Inside a velvet-case


    Technical Data

    Output voltage at 1000 Hz: 5cm/sec. 7,5 mV
    Frequency response: 20-15.000 Hz +3 / -2 dB
    Stylus type: Spherical
    Tracking force range: 3,0-5,0 g (30-50 mN)
    Tracking force, recommended: 4,0 g (40 mN)
    Cartridge weight: 5 g

    A revolutionary new high performance cart for DJs! Exceptional tracking ability of 120 μm!

    The Ortofon-Serato S-120 represents a completely new way of constructing and designing cartridges. Its breakthrough patent pending technology has been designed to provide maximum freedom for DJ performance.

    An innovative technology, called asymmetric suspension, takes the cartridge performance to the next level. 

    Its superior tracking force ensures the S-120 stays in the groove even under extreme live performance conditions. 

    In addition, its design achieves an unprecedentedly low level of record wear, which helps protect your valuable vinyl. On top of this, the S-120 is capable of providing a level of sound quality never thought possible from a modern DJ cartridge.

    Output voltage at 1000Hz, 5cm/sec. 

    10 mV

    Channel balance at 1kHz

    1,5 dB

    Channel separation at 1kHz

    20 dB

    Channel separation at 15 kHz 

    15 dB

    Frequency range at -3dB

    20-18.000 Hz

    Frequency response

    20-18.000 Hz +3/- 2dB

    FIM distortion at recomm. tracking force DIN 45.542 

    Tracking ability at 315 Hz at recomm. tracking force  

    120 μm

    Compliance, dynamic lateral 

    11 μm/m N

    Stylus type

    Spherical

    Stylus tip radius

    R 18 μm

    Tracking force range

    1,5-10,0 g (15-100 mN)

    Tracking force recommended

    4,0 g (40 mN)

    Internal impedance, DC resistance

    1680 Ohm

    Internal inductance

    920 mH

    Recommended load resistance

    47 kOhm

    Recommended load capacitance

    200-600 pF

    Cartridge weight

    18,5 g

    Replacement stylus unit                  

    Ortofon-Serato S-120

     

    The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today. The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. The 2M series of cartridges feature Ortofonʼs trademark split pole pins, an invention which enables moving magnet cartridges to have a flat frequency response, as with a moving coil cartridge.  Split pole pins were invented by Ortofon, and were originally presented in the 500 series and Super OM series. The 2M Blue uses an improved engine, which provides an increased output of 5.5mV.  
    TECHNICAL DATA
    Output voltage at 1000 Hz, 5cm/sec. 5,5 mV
    Channel balance at 1 kHz 1,5 dB
    Channel separation at 1 kHz 25 dB
    Channel separation at 15 kHz 15 dB
    Frequency range at - 3dB 20-25.000 Hz
    Frequency response 20-20.000 + 2 / - 1 dB
    Tracking ability at 315Hz at recommended tracking force 80 µm
    Compliance, dynamic, lateral 20 µm/mN
    Stylus type Nude Elliptical
    Stylus tip radius r/R 8/18 µm
    Tracking force range 1,6-2,0g (16-20 mN)
    Tracking force, recommended 1,8 g (18 mN)
    Tracking angle 20°
    Internal impedance, DC resistance 1,3 kOhm
    Internal inductance 700 mH
    Recommended load resistance 47 kOhm
    Recommended load capacitance 150-300 pF
    Cartridge colour, body/stylus Black/Blue
    Cartridge weight  7,2 g
    Replacement stylus unit 2M Blue

    Κεφαλή με ελλειπτική βελόνα. Βάρος ανάγνωσης 0,75-1,50gr. Ευαισθησία 5 mV. Απόκριση  συχνοτήτων 20-18KHz, διαχωρισμός καναλιών 20db.


    The versatile M92E fits both of the major types of tone-arm mounts in use today. This high-value model offers faithful sound reproduction at a very attractive price. A natural bi-radial diamond tip teamed with a tubular aluminum alloy stylus cantilever accurately traces the grooves of your records for a difference you can hear.

    Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Biradial Diamond Tip + Tubular Aluminum Alloy Stylus Cantilever.  Accurately traces the grooves of your records for smooth sound throughout the frequency range.
        Universal mount
        Biradial diamond tip
        Tubular aluminum alloy stylus cantilever
        Standard mount adapter
        Mounting hardware
        Stylus guard
        Low Tracking Force
        Minimizes wear on your irreplaceable vinyl collection

    Shure M92E Excellent high-value cartridge with smooth sound. Fits turntables with P-mount tone arms or standard ½ inch mount tone arms.

    • Type: MM
    • Fixing: P-mount
    • Output voltage: 5,0mV bei 1kHz, 5cm/sec.
    • Amplifier-connection: Phono MM
    • Frequency range: 20-18.000Hz
    • Material: diamond, bonded
    • Stylus type: elliptical 0.4 x 0.7 mil
    • Tracking force range: 0,75-1,5g
    • Tracking force, recommended: 1,25g
    • Recommended load resistance: 47 kOhm
    • Recommended load capacitance: 200-300pF
    • Weight: 7,3g*

    Weight0.50 kg0.50 kg0.30 kg0.10 kg0.70 kg0.20 kg
    DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
    Additional information
    Βάρος 0.50 kg
    Βάρος 0.50 kg
    Βάρος 0.30 kg
    Βάρος 0.10 kg
    Βάρος 0.70 kg
    Βάρος 0.20 kg