Content |
ORTOFON TA-210 TONERAM
The Ortofon TA-210 tonearm has gone to the next level by reducing unwanted vibrations in the tonearm. TA-210 armtube is a lot less stressed than conventional armtubes due to the Technical rubber and TPE excellent damping properties.
FEATURES:
• TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings
• TA-210 has a standard 5-pin DIN connector for tonearm cable
• The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
• Counterweight with Inner/outer scale
- Inner scale to be applied with main counterweight
- Outer scale to be applied when extra mass ring is added
• Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
• TA-210 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
• Extra mass ring, weight 45 g, for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)
TECHNICAL DATA:
• Effective mass without headshell: 5 g
• Effective armlength (distance between the stylus and pivot point): 329.0 mm
• Mounting distance (distance between the pivot point and turntable center): 316.6 mm
• Offset angle: 16.5 degrees
• Overhang: 12.4 mm
• Tracking force adjusting range (direct reading): 0-3/0-4 g
• Height adjustment range: 35-55 mm
• Diameter of the armbase mounting hole: 19-20 mm
• Diameter of the center shaft of tonearm: 18.0 mm
• Inner null point: 66 mm
• Outer null point: 120.9 mm
• Counterweight for cartridge + headshell mass between 21 and 28g included
• Headshell LH-2000E included
• Headshell weight: 15.5 g
• TA-210 total weight including headshell: 536 g
• Set of tonearm cables 6NX-TSW-1010 included |
Single puck of aluminum for 7-inch singles
Universally suitable for all record players
Height approx. 20 mm
Color: silver
|
Audio-Technica AT-LP140XP BL, Direct Drive Turntable, professional turntable, manual, high-performance direct drive motor, anti-resonance / shock mount die-cast aluminium platter, selectable 33/45/78 RPM speeds, S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest, forward / reverse operation and variable pitch control with quartz speed lock, adjustable pitch range: +/-8 %, +/-16 %, +/- 24 %, stroboscopic platter with speed indicator, popup stylus target light, accessories Included: AT-XP3 phono cartridge, AT-HS6 headshell, dual RCA (male) to dual RCA (male) cable with ground wire, counterweight, felt mat, dust cover, 45 RPM adapter, plug-type stylus target light, colour: black
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Professional anti-resonance, mass-damped, die-cast aluminium platter
- Including AT-XP3 cartridge with AT-HS6 universal half inch-mount headshell
The AT-LP140XP fully manual professional DJ turntable features a high-torque direct-drive motor and anti-resonant, mass-damped, die-cast aluminium platter to ensure stable, on-axis rotation at 33-1/3, 45, and 78 RPM. It is equipped with an S-shaped tonearm with height adjustment, adjustable tracking force (counterweight) and adjustable dynamic anti-skate control.
Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the durable, high-output AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus included with the turntable. It comes pre-mounted to an AT-HS6 universal ½“-mount headshell.
Designed to connect to components with a dedicated phono input, the turntable comes with a detachable dual RCA output cable which supplies a strong 5.5 mV phono output.
Additional professional features include a start/stop button; forward and reverse play; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-8%, +/-16%, and +/-24% adjustment ranges; a stroboscopic platter with speed indicator; a retractable plug-type stylus target light; and a removable hinged dust cover.
- Experience high-fidelity audio and professional DJ performance
- Direct-drive, high-torque servo motor with speed stabilization
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Professional anti-resonance, mass-damped, die-cast aluminium platter with felt mat
- AT-HS6 universal ½“-mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
- Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
- Dedicated phono-level output (5.5 mV)
- Stroboscopic platter with speed indicator
- Forward/reverse operation and variable pitch control with quartz speed lock
- Retractable plug-type target light for easier cueing in low light
- Damped base construction for reduced low-frequency feedback coloration
- Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 RPM adapter, counterweight, felt mat, and removable hinged dust cover.
Cartridge & Stylus |
Model |
AT-XP3 |
Type |
VM Dual Magnet |
Output Voltage |
5.5 mV (@ 1.0 kHz, 5cm/sec) |
Vertical Tracking Force Range |
2.0 to 4.0 g (standard 3.0 g) |
Stylus Shape |
Conical |
Stylus Size |
0.6 mil |
Recommended Load Impedance |
47,000 ohms |
Weight |
6.2 g |
Headshell |
Model |
AT-HS6 |
Weight |
9 g |
Tone arm |
Type |
Balanced S-shaped tonearm with detachable headshell |
Effective Length |
230.5mm |
Overhang |
16mm |
Maximum Tracking Error Angle |
Less than 3 degree |
Applicable Cartridge Weight |
3.5 - 8.5 g |
Anti-skating Range |
0-4 g |
Turntable |
Drive Method |
Direct drive |
Type |
3-speed, fully manual operation |
Motor |
High-torque DC motor |
Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
Pitch Variation |
+/-8% or +/-16% or +/-24% |
Turntable Platter |
Die-cast aluminium |
Starting Torque |
2.2 kgf-cm |
Wow and Flutter |
50 dB |
Output Level |
5.5 mV nominal at 1 kHz, 5 cm/sec |
Power Supply Requirements |
115/230V AC, 60/50 Hz |
Power Consumption |
4.3 W |
Weight |
10.0 kg |
| Φορητό πικάπ με διακόπτη scratch, ενσωματωμένο ηχείο, εξόδους RCA, σύνδεση USB και δυνατότητα αυτόνομης λειτουργίας με μπαταρίες (δεν περιλαμβάνονται).
3 ταχύτητες 33 1/3, 45 και 78 στροφές Προστατευτικό κάλυμμα και ενσωματωμένη χειρολαβή Ενσωματωμένο ηχείο
Θύρα USB για τη σύνδεση και εγγραφή σε υπολογιστή
Έξοδος ακουστικών και είσοδος aux 1/8” |
-Newly developed top panel and reinforced housing construction -Reworked metallic buttons with improved feel & tactile response -USB audio output for digitizing your records easily
- Newly developed top panel and reinforced housing construction
- Reworked metallic buttons with improved feel & tactile response
- Precision Pitch with selectable ranges of +/-8 %
- Superior finish in deep black metallic
- Quartz-driven DJ turntable with direct drive
- Perfect for beginners
- USB audio output for digitizing your records easily
- Precise motor control with 2 speeds selectable (33 1/3 & 45 rpm)
- Precision-engineered, die-cast aluminium platter with stable rotation
- Statically balanced s-shaped tone arm with hydraulic lift and anti-skating - mechanism
- Universal connection for pick-up systems (SME)
- Extendible needle illumination
- Built-in phono pre-amplifier (no grounding necessary)
- Switchable phono and line level output
- Shock-absorbing feet for vibration isolation
- Sturdy, heavy construction with optimized damping features
Turntable:
- Type: direct drive turntable
- Drive: quartz-driven direct drive
- Motor: 8-pol., 2-phase, brushless DC motor
- Turntable speeds: 2 speeds, manual (33 1/3, 45 RPM)
- Starting torque: > 1kg/cm
- Brake time: < 1 sec.
- Start-up / rpm change: < 1 sec.
Platter:
- Material: aluminium die-cast
- Diameter: 332 mm
Connections:
- 1x PHONO/LINE out (gold-plated)
Accessories included:
- Platter, OM Black pick-up system (by Ortofon), headshell, slipmat, counterweight, power cord,
operating instruction manual
| Όπως και το PLX-1000, το PLX-500 δημιουργήθηκε για να αναπαράγει υψηλής ποιότητας ήχο βινυλίου. Η πιο σύντομη διαδρομή του ήχου από την stylus στην έξοδο, μειώνει την παραμόρφωση, ενώ ο διακόπτης phone/line σας επιτρέπει να συνδέσετε απευθείας το πικάπ στο ηχοσύστημά σας ή σε ενεργά ηχεία, χωρίς την προσθήκη εξωτερικού ενισχυτή.
Τεχνικά χαρακτηριστικά:
Included Accessories
Slip mat
Dust cover with jacket stand
Adapter for 45 EP records
Head shell (with cartridge)
Balance and shell weights
Audio conversion cord:
• 1 Stereo pin plug (female)
• 1 Stereo mini plug (male)
USB cord
Specifications
Width: 450 mm
Height: 159 mm
Depth: 368 mm
Weight: 10.7 kg
Turntable
Drive Method: Servo-type direct drive
Platter: Aluminium, die-casting diameter: 332 mm
Motor: 3-phase, brushless DC motor
Braking System: Electronic brake
Rotation Speed: 33⅓, 45, 78 rpm
Rotation Adjustment Range: ±8 %
Wow and Flutter:
Signal-to-Noise Ratio: 50 dB
Starting Torque: > 1.6 kgf・cm
Start Time: Within 1 sec (at 33⅓ rpm)
Tone Arm
Arm Type
• Universal type S-shape tone arm
• Gimbal-supported type bearing structure
• Static balance type
Overhang: 16 mm
Effective Length: 230.5 mm
Tracking Error: Within 3°
Height Adjustment Range: 6 mm
Stylus Pressure Variable Range: 0-4 g (1 scale 0.1 g)
Proper Cartridge Weight:
Cartridge type: VM
Terminals
Outputs: 1 PHONO/LINE (RCA)
USB: 1 USB B port |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.