“When I run my guitar into two amps simultaneously, I always get a loud hum”. This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded […]
“When I run my guitar into two amps simultaneously, I always get a loud hum”. This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended.
The PGA03 Y-box can also be used as a line driver for long cable runs. Also, the PGA03 features a phase reverse switch for the AMP 2 output when using pre-amps or amps that are out of phase.
Can be operated with a power supply unit (not included) or with batteries. “I always get a loud hum when I hook up both my amps…“. A rather common problem! We’ve got the answer !! The Palmer Y-box’s FET input circuitry adapts your guitar signal, driving a transformer which routes the ungrounded signal to the output. Ground hum is eliminated. 9V battery operation is recommended. The Y-box also serves as a line driver for long leads, and it allows for phase reversal of the AMP 2 output. This comes in handy when you’re using two (pre-) amps.
Βάρος
0.25 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “PALMER GA03 Y-Box Guitar Splitter Διαχωριστής Ενεργός για δύο ενισχυτές Κιθάρας” Ακύρωση απάντησης
Κάθισμα Drums ρυθμιζόμενο καθ΄ύψος (500mm-630mm), Ανατομική στρογγυλή σέλα διαμέτρου 280mm, Διάμετρος σωλήνα:28,6mm/25mm, Πόδια διπλά ενισχυμένα με αντιολισθητικά προστατευτικά στα άκρα.
Content
"When I run my guitar into two amps simultaneously, I always get a loud hum". This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended.
The PGA03 Y-box can also be used as a line driver for long cable runs. Also, the PGA03 features a phase reverse switch for the AMP 2 output when using pre-amps or amps that are out of phase.
Technical specifications:
Product type
Splitters
Split type
1 in 2
Inputs
1
Input connectors
6.3 mm jack
Adjustable input
no
Number of split-outputs per canal
1
Output connectors
6.3 mm jack
THRU outputs/channel
1
Transformer isolated outputs
Yes
Adjustable output
no
Controls
ground lift, phase
Indicators
Power
Operating voltage
9 V block, 9 V DC power supply
Width
125 mm
Depth
80 mm
Height
45 mm
Cabinet material
sheet steel
Cabinet surface
Powder coated
Weight
0,528 kg
Optional Power Supply PW9V
Can be operated with a power supply unit (not included) or with batteries. “I always get a loud hum when I hook up both my amps…“. A rather common problem! We’ve got the answer !! The Palmer Y-box’s FET input circuitry adapts your guitar signal, driving a transformer which routes the ungrounded signal to the output. Ground hum is eliminated. 9V battery operation is recommended. The Y-box also serves as a line driver for long leads, and it allows for phase reversal of the AMP 2 output. This comes in handy when you’re using two (pre-) amps.
Κάθισμα Drums ρυθμιζόμενο καθ΄ύψος (500mm-630mm), Ανατομική στρογγυλή σέλα διαμέτρου 280mm, Διάμετρος σωλήνα:28,6mm/25mm, Πόδια διπλά ενισχυμένα με αντιολισθητικά προστατευτικά στα άκρα.
ZBox Overview
Take back your guitar tone!
Today's guitar amp modeling plug-ins are simply amazing in their ability to faithfully model real guitar amplifiers. From IK Multimedia's Amplitube, to Waves, to Native Instruments, to Line 6, to Digital Performer's included Custom '59, you can plug your guitar directly into your audio interface, dial up a guitar tone in your plug-in software, and play. The sound is simply stunning.
The solution? ZBox!
ZBoxʼs unique advantage? Authentic matching circuits that emulate the two-jack switching network found on many classic amplifiers, complete with analog simulation of the input tube grid. Only ZBox delivers the most authentic amplifier impedance matching available for the absolute truest sound and "feel” from your guitar.
ZBox is the "missing link” for digital guitar processing, providing the hardware-driven input characteristics required to truly emulate a real guitar amp.
If you use Digital Performer's Custom 59 amp model plug-in, or a third-party guitar plug-in product like IK Multimedia Amplitube, Waves GTR, Native Instruments Guitar Rig, or similar guitar modeling software, use ZBox to further enhance the authenticity of the tones you play from these products!
Just plug your guitar into ZBoxʼs Lo-Z or Hi-Z input (whichever sounds better), and plug the ZBox into the guitar input on the destination device (audio interface, wireless box, mixer, recorder, PA, etc.) as shown.
ZBox provides the proper input impedance levels to match your guitarʼs output signal. The result? Your guitar sounds like it is connected to a real guitar amp and has a much warmer tone and authentic "response.”
This is especially true when using digitally modeled guitar processing software (plug-ins) on your computer, audio interface, digital mixer, etc.
To support a wide range of guitars, ZBOX provides authentic "Hi-Z” and "Lo-Z” inputs, just like the ones found on many classic guitar amps, complete with analog simulation of the input tube grid.
Βάση ενισχυτή κιθάρας σε σχήμα 'X' με ρυθμιζόμενο το πίσω μπράτσο.
Εφαρμογή:
Ενισχυτής
Τύπος:
Ρυθμιζόμενη
Είδος:
Μονή
The concept behind the cab merger may be very simple, but it fills an important gap!
Have you ever wanted to connect two guitar cabinets to one amplifier output? The PCABM makes it possible.
In addition, you can select whether the cabinets should be wired in parallel or series with one another. For example, if you interconnect two 8 ohm cabinets. The PCABM offers you two resulting impedances to choose from: 4 ohms (parallel) or 16 ohms (serial). The device is passive and does not affect the tone in any way.
Type: passive
Number of inputs: 2
Input connections: 6.3mm jack
Number of outputs: 2
Output connections: 6.3mm jack
Cabinet material: die-cast aluminium
Case surface: powder-coated
Width: 105 mm
Depth: 35 mm
Height: 35 mm
Πρακτική, εύχρηστη και σταθερή βάση για άλτο σαξόφωνα (Εb). Κατασκευή από αλουμίνιο με προστατευτικά λάστιχα στο σημείο που εφάπτεται το σώμα και η καμπάνα του σαξοφώνου προς αποφυγή τραυματισμού του οργάνου. Αναδιπλώνεται τόσο, έτσι ώστε να τοποθετηθεί στην θήκη του από βελούδο και στη συνέχεια μέσα στην καμπάνα του οργάνου για εύκολη μεταφορά.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
%20of%20your%20guitar%20to%20the%20impedance%20of%20a%20non-amp%20input,%20such%20as%20the%20mic/instrument%20preamp%20inputs%20on%20your%20audio%20interface.%20Without%20proper%20impedance%20matching,%20your%20guitar%20wonʼt%20sound%20natural%20or)
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.