PALMER PCAB212V30 MI CAB 212 V30 – Guitar Cabinet 2 x 12″ with Celestion Vintage 30 8/16 Ohm

Palmer cabinets are rugged, flexible and affordable guitar cabinets. The main features are:

• Front-mounted speakers
• Detachable grill
• Solid workmanship
• Speaker mount and quality check carried out in Germany

• Cabinet impedance (Mono): 8
• Cabinet impedance (Stereo): 16/Speaker
• Power Rating (Mono): 120 W
• Power Rating (Stereo): 60/Speaker
• Cabinet weight without speakers: 15,6 kg
• Back: Closed
• Dimensions (WxDxH): 48x71x29 cm
• Front Grill: Fabric, detachable
• Speaker Mounting: 2 x 12" front mounted

Back in 1986 a new breed of hard rock player was on the rise. To meet the demands of the players and their increasingly ʽhot-roddedʼ amplifiers, we set out to develop a modern speaker, capable of handling much more power and overdrive. To achieve this, we coupled our ʽHʼ magnet (the closest in performance to Alnico) with a new cone and voice coil employing contemporary materials.

Our most revealing speaker, the Vintage 30 features enormously detailed and complex overtones, a warm low-end, a famously rich vocal mid-range and a beautifully detailed top-end. Used singly to reveal the complexities in hand-wired boutique amps, or in quartets for a wonderfully intricate vintage 3D crunch, the Vintage 30 sound has been captured on thousands of recordings from a diverse range of notable players including Slash, Steve Stevens and Peter Frampton.

• Nominal diameter: 12“, 305 mm
• Power Rating: 60 W
• Nominal impedance: 8 ohms
• Sensitivity: 100 dB
• Chassis type: Pressed steel
• Voice coil diameter: 1,75“, 44,5 mm
• Voice coil material: Round copper
• Magnet type: Ceramic
• Magnet weight: 50 oz, 1,42 kg
• Frequency range: 70 - 5000 Hz
• Resonance frequency, Fs: 75 Hz
• DC resistance, Re: 7,3 ohms

• 1960AJSB:

• Type: Speaker Cabinet
• Output (RMS): 300 Watt
• Speakers: 4 x 12" Celestion 75 speaker
• Impedance: 16/4 Ohm Impedance (Mono)/8 Ohm Impedance (Stereo)
• Dimensions (mm): 760 x 830 x 365
• Weight (kg): 36.4Kg

Hand Soldered, 120 Watt 4x12 Straight Front

To complement the 1959HW's visual sonic majesty we offer the 1960AHW (angled) and 1960BHW (straight) 4x12" cabinets that boast Basket Weave fret cloth, metal handles, "100" logos and are loaded with Celestion's highly-acclaimed G12H-30 re-issue speakers.

The 1960AHW and 1960BHW Cabinets match the 1959HW heads perfectly. Both are 120 Watt, 16 Ohm mono 4x12" cabinets featuring salt-n-pepper grille cloth, metal handles, and loaded with the bass version of Celestion's reissue of the G12H30 speaker.

The timeless tone of vintage handwired, all-tube Marshall amplifiers have made them highly desirable to collectors and sonic connoisseurs alike. Due to overwhelming public demand, Marshall is proud to introduce meticulous, handwired re-issues of three of their most sought-after amplifiers as the first products in our brand new Handwired Series – a Series that celebrates the company's rich tonal heritage and revisits the handcrafted traditions and skills that first launched the Marshall legend.

Marshall 1960BHW Specifications:

• Cabinet Type: Base (straight, flat front)
• Speaker Type: G12H-30
• Speaker Configuration: 4 x 12 inches
• Power (RMS): 120 Watts
• Impedance: 16 Ohms
• Dimensions (mm): 760 x 830 x 360 (approx. 30 x 33 x 14.2 inches)
• Weight (kg): 36.4 (approx. 80 lbs.)

Πληροφορίες

Handwired Ηχείο κιθάρας 120W 4x12" Celestion G12H-30 Reissue Speakers.

Πληροφορίες

Hχείο κιθάρας 150W με 2x12" μεγάφωνα Celestion G12T-75W για χρήση Μono (8Ω) / Stereo (16Ω).

Marshall 1960AX 100W 4x12'' Guitar Speaker Cabinet

Marshall Speaker Cabinets
Marshall is the only choice for serious musicians. Nothing compares to Marshall cabinets in terms of awesome tone and projection. Both visually and aurally, Marshall 4x12 cabs are indeed "the business.“

Great sound and looks however are not everything. Many years of experience mean that their speaker cabinets are also built to stand the test of time. Highly skilled craftsmen construct them from the finest quality materials with precision corner locked joints, tough cotton backed PVC covering, heavy-duty hardware, and the highest quality fittings.

The Marshall Stack
If one thing personifies the image of rock 'n' roll more than anything else it's the Marshall 4x12. Though often imitated, nothing compares with the original. The first 4x12 cab was designed and built by Jim Marshall in 1962. Since then Marshall has made many thousands, which have appeared on stages both large and small all over the world.

After the initial success of the Marshall 4x12, it wasn't too long before they designed and built the first stack, where an angled cabinet sits on top of a straight fronted cab, with the amplifier placed on top. This came about after discussions with Pete Townshend of The Who. Pete and Jim Marshall sat down and discussed The Who's requirements for an 8x12 cab with an angled top. This was designed and built, but due to this awesome cab being somewhat cumbersome, only six were ever made.

As a result, Marshall came up with the more practical idea of stacking an angled cab on top of a straight fronted model. Thus the famous Marshall stack was born. What happened to the six 8x12 cabs you ask? Well, 2 went to Pete Townshend, 2 went to John Entwhistle and the remaining 2 went to the Small Faces. The Marshall stack on the other hand has stayed in production ever since and has gone on to become the most recognizable rock 'n' roll icon.

As Marshall invented the stack, Marshall 4x12's are the only true originals. Everything else is merely an imitation.

Heavy-duty castors are fitted as standard to all Marshall full size 4x12's to ensure that these cabinets are ready to roll without rocking.

No sharp metal edges or rough fittings ? the smooth ABS plastic Marshall corner fits perfectly and offers excellent protection to all eight cabinet corners.

The highest quality woodwork includes the 'corner locking' of each and every joint. This helps give Marshall cabinets the incredible strength and durability, which has become as legendary as the Marshall sound itself.

Heavy-duty Grab Handles are fitted to all Marshall cabinets. Their tough, ergonomic recessed casing design gives easy access to the bar of the handle without affecting the cabinet's smooth lines.

Vintage-circa early 70's
Checkered cloth
White piping
Medium size white logo
Black Levant vinyl
Gold beading on Cab
Angled front
Speakers: 4 Celestion G12 M-25w SPKR-00016
Power: 100 watts
Impedance: 16 ohm
Dimensions: 760 x 830 x 360 mm
Weight: 37.7 kg
Cover: COVR-00022 optional