Content |
Palmer Buff - Preamp for electrical Instruments
The Palmer PEBUFF is a Buffer and Booster for electrical instruments. Amplifying the guitar signal before it goes to the input of a tube amplifier opens a whole world of new sounds. The device can also be used as a cable driver for longer distances or larger pedalboard setups.
Specifications :
- Dimensions (L x W x H): 120 x 100 x 61 mm
- Voltage range: 9-20 V AC or DC, 9 V PP3 battery
- Max.power take-up: 10 mA
- Frequency response: 20 Hz - 10 kHz
- Distortion: 0.5% (1 kHz)
- Impedance, Input Normal: 1 MOhm
- Impedance, Input Bright: 4 MOhm
- Impedance, Output: 150 Ohm
- Signal-to-noise ratio: -60 dB
- Max. level: 5 V
- Max. gain: 13 dB
|
The CEB-3 Bass Chorus pedal offers a split-frequency chorus effect capable of applying warm, rich chorusing to the higher frequencies without muddying up the lows. It's the perfect chorus pedal for bassists.
- Compact chorus pedal especially designed for bass guitar
- Applies chorus sound to the high frequencies without altering low frequencies
- Effect Level, Low Filter, Rate and Depth knobs permit precise tonal shaping
- BOSS 5-year warranty
|
Πετάλι harmonizer για κιθάρα με δυνατότητα intelligent-fixed cromatic-detune voicing pitch shifting, 3 μέρη αρμονίας, 4 προεπιλογές μνήμης, σύνδεση sidechain, pre-harmony Distortion loop και ενσωματωμένο tuner.
Features
- Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
- 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
- Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
- Edit, store and recall 4 memory presets.
- Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
- Built-in guitar tuner
- Pre-harmony Distortion loop
- Features
- Shifting Modes
- Configurations
- Specifications
Features
- Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
- 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
- Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
- Edit, store and recall 4 memory presets.
- Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
- Built-in guitar tuner
- Pre-harmony Distortion loop
Shifting Modes
Triad Center Shifting Mode
Create musically correct harmonies based around your favorite chordal structure whether soloing a riff in a specific key or using the sidechain input for chord recognition.
Scalic Shifting Mode
Creates musically correct harmonies with various shifting depending on the harmony key.
Fixed (chromatic) Shifting Mode
Applies fixed harmony intervals to all notes with the fixed number of semitones selected.
Detune Shifting Mode
Get a thick overall sound applying a small fixed amount of pitch shifting to the lead guitar voice ranging from 5 cents to 30 cents in both up and down directions simultaneously.
Configuration Electric Guitar With Pre-Harmony Distortion and Stereo Amplifiers
Add distortion to your lead and harmonies.
The Side-Chain Using Two Guitars with Pre-Harmony Distortion
This configuration is used when the 2nd guitar is the source signal.
Specifications
Unit Dimensions: 9.75" x 7.9" x 3.4“
Unit Weight: 4 lbs./1.82 kg.
Power Supply: 9VAC 1300mA PS0913B-120 Included
Inputs: 1/4" Unbalanced
Outputs: 1/4" Unbalanced
Sidechain: Ground Lift Switch
|
Πεταλιέρα με 10 εφέ modulation κορυφαίας ποιότητας από την EVENTIDE. Phaser, Flanger, Chorus, Polymod, TremoloPan, Undulator. Vibrato, Q-wah Modfilter, Ringmod. 27 μνήμες, Tap Tempo και MIDI Clock Sync.
SPECIFICATIONS:
Analog Input/Output | Input impedance | 500K ohms | Output Impedance | 470 ohms | Recommended Load Impedance | 10K ohms or greater |
Connectors | Input 1 (mono) | ¼ inch mono phone jack | Input 2 | ¼ inch mono phone jack | Output 1 (mono) | ¼ inch mono phone jack | Output 2 | ¼ inch mono phone jack | Expression Pedal | ¼ inch mono phone jack | Aux Switch | ¼ inch stereo phone jack | USB | Type B Socket. Use 2.0 cables only. | MIDI In | Five pin DIN (Female) | MIDI Out/Thru | Five pin DIN (Female) | AC Adapter Jack | Power Supply included (see below) |
Physical | Power | 9 VDC, 1200 mA, Tip hot (+) | Dimensions | English: 4.8" (H) x 7.5" (W) x 2.12" (D)
Metric: 122 (H) x 190 (W) x 54 (D) mm | Weight | 2.15 lbs, 1kG |
|
The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.
The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.
The main features of the Marshall EH-1 ECHOHEAD include:
- 6 different, high quality delay effects for you to explore
- Multi-mode selector switch
- Delay time control
- Feedback control
- Level control
- Solid metal casing
- Passive bypass
- Tap tempo pedal input
- Power: 9V DC Centre Negative Regulated PSU or PP3 battery
- Minimum Current Draw: 80mA
- Switches: On/Off Switch
- Indicators: On/Off LED
- Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
- Input Impedance: 1MOhm
- Output Load Impedance: less than 1kOhm
- Dimensions: 120mm x 65mm x 55mm
- Weight: 510 grammes
|
Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.
Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.
- Snake Charmer Compressor CT05
- Connection: Input: x1 (guitar input), Output: x1 (line output)
- Input / Output Impedance: 830 k-ohm / 4 k-ohm
- Tube: 12AU7 (ECC82)
- Power Supply: Four AA alkaline batteries or DC9V AC adapter
- Battery Life: Approx. 18 hours
- Current Consumption: 95 mA
- Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
- Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
- Included Items: Four AA alkaline batteries
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.