PALMER PHDA02 Pro PHDA 02 – Reference Class Headphone Amplifier – 1-channel

353.91 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: 4049521090677
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
The PHDA02 – a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes. In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono […]

 

Διαβάστε περισσότερα

The PHDA02 – a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.

In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.

The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal-to-noise ratio at all loads.

Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.

The PHDA02 is equipped with low-noise op amps, and the output amplifiers’ discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5“.

 


 

Βάρος 1.58 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “PALMER PHDA02 Pro PHDA 02 – Reference Class Headphone Amplifier – 1-channel”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

PALMER PHDA02 Pro PHDA 02 - Reference Class Headphone Amplifier - 1-channel removeSennheiser HDVA 600 ΑΚΟΥΣΤΙΚΑ Headphones Amplifier removePRESONUS HP-4 Προενισχυτής Ακουστικών 4 καναλιών removeLD Systems HPA 6 - 19" Headphone Amplifier 6-channel ΕΝΙΣΧΥΤΗΣ ΑΚΟΥΣΤΙΚΩΝ removeSOUND DEVICES HX-3 Φορητός Ενισχυτής Ακουστικών removeLD Systems HPA 1 - Amplifier for headphones and wired IEM ΕΝΙΣΧΥΤΩΝ ΑΚΟΥΣΤΙΚΩΝ In-Ear-Monitoring remove
NamePALMER PHDA02 Pro PHDA 02 - Reference Class Headphone Amplifier - 1-channel removeSennheiser HDVA 600 ΑΚΟΥΣΤΙΚΑ Headphones Amplifier removePRESONUS HP-4 Προενισχυτής Ακουστικών 4 καναλιών removeLD Systems HPA 6 - 19" Headphone Amplifier 6-channel ΕΝΙΣΧΥΤΗΣ ΑΚΟΥΣΤΙΚΩΝ removeSOUND DEVICES HX-3 Φορητός Ενισχυτής Ακουστικών removeLD Systems HPA 1 - Amplifier for headphones and wired IEM ΕΝΙΣΧΥΤΩΝ ΑΚΟΥΣΤΙΚΩΝ In-Ear-Monitoring remove
Image
SKUPHDA02S07SE00313HP4 EULDHPA6HX-3LDHPA1
Rating
Price 353.91 με ΦΠΑ 24% 1,499.00 με ΦΠΑ 24% 138.87 με ΦΠΑ 24% 212.03 με ΦΠΑ 24% 491.97 με ΦΠΑ 24% 119.95 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 2 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 4 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 2 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Διαθέσιμο κατόπιν παραγγελίαςΜόνο 4 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The PHDA02 - a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.

In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.

The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal-to-noise ratio at all loads.

Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.

The PHDA02 is equipped with low-noise op amps, and the output amplifiers' discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5“.

 


 

Overview

Sound can be perfected with Sennheiserʼs HDVA 600. Delivering authentic sound in its purest form, listeners are treated to a world of sheer listening pleasure. Years of knowledge in audio engineering and innovations in acoustic amplification, resulted in the creation of the HDVA 600. The consistently symmetrical signal processing and extremely low harmonic distortion guarantees an absolutely precise sound. Also, thanks to their pre-amp performance, they are easy to adjust and be connected directly to speakers for optimum audio amplification. In essence, the HDVA 600 provides a spectacular listening experience when paired with any Sennheiserʼs audiophile headphones.

Features
Consistently symmetrical signal processing for maximum sound quality
Symmetrical inputs and outputs simplify integration into a system
High-end ALPS quadruple potentiometer achieve perfect channel equality
Variable gain factor (five stages) for optimized use of low impedance headphones
Sophisticated metal housing to protect against signal scatter and vibration
Solid controls turned from solid metal, providing the utmost in long-term stability

Το HP-4 της Presonus είναι η απάντηση στην ανάγκη για πολυκάναλο επαγγελματικό προενισχυτή ακουστικών, σε μικρό μέγεθος και προσιτή τιμή. Διαθέτει 4 εξοδους ακουστικών στο μπροστινό μέρος και η κάθε μια έχει το δικό της ποντεσιόμετρο για την αυξο,είωση της έντασης του ήχου και 150mW προενίσχυσης ανά κανάλι. Το HP-4 επίσης διαθέτει και volume control για τα monitor στο control room, διακόπτη monitor mute και διακόπτη mono προσφέροντάς σας έτσι μια πανίσχυρη και ολοκληρωμένη monitoring λύση σε μια απίστευτα χαμηλή τιμή.


 

LDHPA6 6-Channel Rackmount Headphone Amplifier

The LD Systems HPA 6 is a highly flexible 1U 19" rack format headphone amplifier with 6 fully independent channels and comprehensive features for a wide range of professional audio monitoring applications.

Each channel provides a 6.3 mm TRS headphone output on the front panel with level control, mono/stereo switching, discrete left/right muting  and a 6.3 mm TRS Aux input with Main/Aux balance control  for mixing in further signal sources. Four-segment LED meters permit visual output level monitoring, and two 6.3 mm TRS outputs per channel on the rear allow for connecting a total of 18 headphones.

The HPA 6\'s main section features a master level control with eight-segment LED metering  and 6.3 mm TRS input to mix in an additional source with all channels. The rear panel provides the main stereo inputs on balanced XLR and 6.3 mm TRS connectors and stereo outputs for daisy chaining multiple units.

  • Type: 6-channel
  • Inputs: Main Input (Stereo), Direct In (Stereo), 6 x Aux In (Stereo)
  • Input Connections: XLR and 6.3 mm jack L&R (Main Input, balanced), 6.3 mm stereo jack (Direct In), 6.3 mm stereo jack (Aux In)
  • Input Impedance: 13 kOhm
  • Line Outputs: Main Output (stereo, balanced)
  • Line Output Connectors: XLR and 6.3 mm jack L&R
  • Headphone Outputs: 6 x 3
  • Headphone Output Connectors: 6.3 mm stereo jack
  • Power Output: 6 x 125 mW
  • Minimal Connected Impedance per Channel: 8 ohms
  • Frequency Response: 20 Hz - 20.000 Hz
  • Controls: Main Input Level, 6 x Input Mix Main/Aux, 6 x Headphone Level, 6 x Mono Switch, 6 x Mute L&R, Power
  • Indicators: Main Input/Direct In Level Meter (8-segment LED chain), 6 x channel level meter (4-segment LED chain), 6 x mono LED, 6 x Mute L&R LEDs, Power LED
  • Power Supply: IEC power socket
  • Operating Voltage: 220 - 240 V AC, 50 - 60 Hz / 110 - 120 V AC, 50 - 60 Hz
  • Power Consumption: 40 W
  • Cabinet Material: metal
  • Cabinet Surface: painted
  • Width: 483 mm
  • Height: 44 mm
  • Depth: 217 mm
  • Accessories (included): power cord

Φορητός ενισχυτής Ακουστικών υψηλής ποιότητος. Διαθέτει 3 ανεξάρτητες εξόδους ακουστικών (1/4 TRS η μία μπορεί να είναι 1/8 TRS) με έλεγχο στάθμης στη κάθε μια, ένδειξη peak σε κάθε έξοδο, επιλογή λει­τουργείας mono/stereo, 1 είσοδο Line XLR, 1 unbalanced είσοδο Line 1/4 TRS, 1 unbalanced είσοδο 1/8 TRS, έξοδο Loop για να συνδεθεί με άλλη HX- 3, έξοδο balanced TA3 line / tape, Λειτουργεί με 2 μπαταρίες ΑΑ η με εξωτερικό 5-18 VDC.

Αριθμός Εισόδων0  
Τύπος Εισόδου  
Βύσμα Εισόδου  
Προενίσχυση Μικροφώνου  
Τροφοδοσία Phantom  
Ενδεικτικά Όργανα  
Αριθμός Εξόδων0  
Τύπος Εξόδου  
Βύσμα Εξόδου  
Τροφοδοσία  
Ιδιαίτερα Χαρακτηριστηκά

 

The LD Systems HPA 1 is a versatile headphone amplifier with high power output for stage, studio and home recording and is the perfect solution for wired in-ear-monitoring.. The compact device in a rugged, ergonomically shaped plastic housing with soft-touch surface and practical belt clip is very extensively equipped. In addition to locking XLR connectors for the stereo signal L/R input, the HPA 1 has a balanced 3.5 mm stereo jack as AUX input, which can be used in parallel for clicks or playback. It is protected for safe operation against excessive input levels; a hollow pin socket with negative internal contact enables the connection of a network adapter for fixed operation. A 3.5 mm stereo jack is provided as earphone and headphone output. Volume level and balance can be set with easy-grip knobs, a push-button switches between the summed mono and stereo signals. A full-fledged limiter is integrated for distortion-free playback and as protection against feedback. The LD Systems HPA 1 has bi-colour LEDs to facilitate the features overview, which displays the response of the limiter during peaks and the battery status. At 165 grams, the headphone amplifier is distinctly light-weight and can be operated for up to 12 hours thanks to a high quality 9 V block battery.
  • Model Name: LDHPA1
  • Product Type: headphone amplifier
  • Type: 1-channel stereo
  • Inputs: Main Input (Stereo), 1 x Aux In (Stereo)
  • Input Connections: XLR-F (L + R Input, balanced), 3.5 mm stereo jack (Aux In)
  • Input Impedance: 6 kOhm (XLR In), 10 kOhm (3.5 mm jack)
  • Input Sensitivity: 3 dBu (XLR In), -6 dBV (3.5 mm jack)
  • Max. Input Level: 16 dBu (XLR In), 7 dBV (3.5 mm jack)
  • Protection Circuits: Audio Limiter, Max. Input leveling, Power OFF -Mute relay
  • Headphone Outputs: 1
  • Headphone Output Connectors: 3.5 mm stereo jack
  • Power Output: 2 x 1.65 Vrms / 1% THD 33 Ohm Load
  • Minimal Connected Impedance per Channel: 16 ohms
  • Frequency Response: 20 Hz - 40,000 Hz
  • THD 1 kHz Sine: 0.04%
  • Controls: Power/Volume, Balance L/R, Stereo/Mono (Focus) switch,
  • Indicators: Signal (Green) / Peak (Amber), Battery (low battery: red) / Power LED (Power ON: green)
  • Power Supply: 9 V DC block battery, DC jack
  • Operating Voltage: 9 V DC
  • Power Consumption: Nom. 70 mA / Max. 150 mA
  • Housing Material: plastic
  • Housing Surface: soft-touch
  • Housing Colour: black
  • Width: 80 mm
  • Height: 42.5 mm
  • Depth: 133 mm
  • Accessories (included): belt clip, 1 m 3.5 mm stereo jack cable
Weight1.58 kg0.40 kg2.00 kg3.00 kg2.00 kg0.05 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.58 kg
Βάρος 0.40 kg
Βάρος 2.00 kg
Βάρος 3.00 kg
Βάρος 2.00 kg
Βάρος 0.05 kg