Palmer Pro MONICON Passive Monitor Controller

70.00 με ΦΠΑ 24%

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

EAN: 4049521156564
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Palmer Monicon, and the volume is right! With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. […]

 

Διαβάστε περισσότερα

Palmer Monicon, and the volume is right!

With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.

The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking “little helper” that is a typical Palmer product.

  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz – 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm

 

Βάρος 1.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “Palmer Pro MONICON Passive Monitor Controller”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

Palmer Pro MONICON Passive Monitor Controller removeMACKIE BIG KNOB PASSIVE 2in/2out removeMackie Big Knob Studio 3in 2out removePRESONUS HP-4 Προενισχυτής Ακουστικών 4 καναλιών removeVOX AMPLUG-AC30 ΕΝΙΣΧΥΤΗΣ ΑΚΟΥΣΤΙΚΩΝ CLEAN SOUND removeBEHRINGER Monitor2USB Controler για Studio Monitors και Ακουστικά remove
NamePalmer Pro MONICON Passive Monitor Controller removeMACKIE BIG KNOB PASSIVE 2in/2out removeMackie Big Knob Studio 3in 2out removePRESONUS HP-4 Προενισχυτής Ακουστικών 4 καναλιών removeVOX AMPLUG-AC30 ΕΝΙΣΧΥΤΗΣ ΑΚΟΥΣΤΙΚΩΝ CLEAN SOUND removeBEHRINGER Monitor2USB Controler για Studio Monitors και Ακουστικά remove
Image
SKUPMONICON149.076149.077HP4 EUVOX AMPLUG-AC30E008168
Rating
Price 70.00 με ΦΠΑ 24% 79.00 με ΦΠΑ 24% 243.78 με ΦΠΑ 24% 138.87 με ΦΠΑ 24% 40.92 με ΦΠΑ 24% 173.00 με ΦΠΑ 24%
Stock

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Διαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
ContentPalmer Monicon, and the volume is right! With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal. The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
  • Type: passive
  • Number of channels: 2
  • Number of inputs: 2
  • Input connections: XLR Combo / 3.5mm stereo jack
  • Input type: balanced/unbalanced
  • Maximum input level: +20 dBu
  • Input impedance: 10 kohms balanced/ 5 kohms unbalanced
  • Number of outputs: 2
  • Output connections: XLR/m, 3.5 mm stereo jack
  • Output type: balanced/unbalanced
  • Max output level: +20 dBu
  • Output impedance: 600 ohms
  • Frequency response: 10Hz - 40 kHz +/- 1 dB
  • THD: 0,001 %
  • Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
  • Controls: Attenuation, Mute, Mono
  • Housing material: sheet steel/wood
  • Housing surface: powder-coated
  • Width: 164 mm
  • Height: 62 mm
  • Depth: 85 mm
 

Το Mackie Big Knob Passive είναι ένα Monitor Controller με παθητικό κύκλωμα χωρίς τροφοδοσία και με εξόδους για 2 ζευγάρια μόνιτορ και 2 στέρεο εισόδους για πηγές. Διαθέτει μεγάλο ποντεσιόμετρο έντασης. Με διακόπτες για Mute, Dim, Mono, Monitor και Signal Source. Διαθέτει συνδέσεις: 2 x Stereo Line 6,3mm Balanced, 2 x Stereo Monitor Out 6,3mm balanced. Με μεταλλική κατασκευή. Διαστάσεις: 142 x 137 x 79 mm, Βάρος: 1 Kg. Κατασκευή "Built-Like-A-Tank”.

The Mackie Big Knob Passive is a monitor controller that allows you to choose between two audio sources and two monitor pairs. It can be used for project and professional studios and is designed to increase your workflow for recording and mixing applications.

It features mono, mute, and dim functions and delivers pristine audio quality. Built with the classic Big Knob volume control, it is designed with a passive audio path, which requires no power supply. The Big Knob Passive studio monitor controller is sturdy and has a built-like-a-tank design.

The Big Knob Passive features a download for ProTools | First and Waveform software and The Musician\'s Collection plug-in package including 23 high-quality plugins with BBD Delay, Level Lite, 304E EQ, and 304C Compressor. To authorize the software, simply input the mixer\'s serial number on the website.

  • Choose between two sources and two monitor pairs
  • Classic Big Knob volume control
  • Mono, mute, and dim functions
  • Flexible source connections including convenient 3.5mm input for your smartphone
  • 1/4\" inputs and outputs support balanced or unbalanced connections
  • Passive design requires no power source
  • Content
    • Pro Tools | First and Waveform OEM professional software and plugin packages included
    • The DAW Essentials Bundle for Waveform OEM includes 16 powerful plugins like Equalizer, Compressor, Reverber8, and Limiter
  • Included Software from Avid, including Pro Tools | First
    • An industry standard for decades, Pro Tools | First is easy enough for beginners yet sophisticated enough for experienced musicians. Get many of the same tools used by your favorite artists and recording studios. And now you can collaborate online with anyone, anywhere, and create at the speed of your imagination. Available for macOS and Windows operating systems. 
    • In addition to the powerful plug-ins within Pro Tools | First, this mixer comes with the exclusive Mackie Musician Collection featuring 23 fantastic plug-ins, including:
      • Avid 304E EQ: Add musical warmth with a treble and bass equalizer with sweepable mid control
      • Avid 304C Compressor: Tweak the clarity, balance, and rhythmic feel of music with this optical-modeled compressor
      • BBD Delay: Create delay, chorus, and vibrato effects based on a classic guitar pedal
      • Black Op Distortion: Add rich distortion based on a classic distortion pedal
      • Black Shiny Wah: Achieve the famous classic tones of a respected wah wah pedal
      • Black Spring Reverb: Get the twang and space of a vintage amplifier
      • C1 Chorus: Emulates a classic chorus pedal
      • DC Distortion: Dial up a range of overdriven tones with this Avid custom distortion effect
      • Eleven Lite: Get the sound of popular guitar amps and speaker cabinets
      • Flanger: Create esoteric sounds with this homage to vintage and modern flangers
      • Graphic EQ: Sculpt frequencies with ease
      • Gray Compressor: Add warmth to tracks based on a vintage Ross compressor
      • Green JRC Overdrive: Get the coveted sounds of a classic IC overdrive pedal
      • In-Tune: Keep your instruments in tune with this digital tuner
      • Orange Phaser: Create interesting effects with this phase shifter based on a classic design
      • Roto Speaker: Recreate the sounds of a Leslie rotary speaker cabinet
      • Sci-Fi: Add analog synth-type ring and frequency modulation
      • Studio Reverb: Create natural-sounding reverb and ambient effects
      • Tape Echo: Add vintage analog delay and chorus effects
      • Tri Knob Fuzz: Get the Hendrix tone with this fuzz box based on one of the first fuzz pedals
      • Vari-Fi: Create the effect of audio changing tape speed
      • Vibe Phaser: Add phase-shift and rotary speaker effects
      • White Boost: Boost gain without coloring tone

Inputs 4 x 1/4\" TRS Balanced/Unbalanced Line Inputs
1 x 1/8\" / 3.5 mm TRS Unbalanced Stereo Input
Outputs 4 x 1/4\" TRS Balanced/Unbalanced Monitor Outputs
Mono/Mute/Dim Yes
Frequency Response 10 Hz to 30 kHz (±1 dB, 0 dBu Input)
THD + N

Mackie Big Knob Studio Monitor Controller and interface

-Επιλογή μεταξύ 3 πηγών και 2 ζευγαριών Monitor -Έλεγχος έντασης Big Knob -Ανεξάρτητο gain σε όλες τις πηγές και τα monitor out

Επαγγελματική επιλογή πηγών και Studio Monitor για ακρόαση

  • Επιλογή μεταξύ 3 πηγών και 2 ζευγαριών Monitor
  • Έλεγχος έντασης Big Knob
  • Ανεξάρτητο gain σε όλες τις πηγές και τα monitor out
  • Mono, Mute και Dim επιλογές

Ευέλικτο 2x2 USB Interface για εγγραφή

  • 2 Onyx Mic Preaps που διαθέτουν Phantom Power για πυκνωτικά μικρόφωνα
  • Υψηλής ανάλυσης 192kHz / 24-bit interface για εγγραφή και αναπαραγωγή.
  • Το Cue mix επιτρέπει τον έλεγχο μεταξύ των άμεσων εισόδων και άλλων σημάτων για μηδενική καθυστέρηση στο Monitoring.
  • Η επιλογή των δρομολογήσεων εγγραφής παρέχει ευελιξία για εφαρμογές όπως Broadcasting.

• Μεγάλη γκάμα χαρακτηριστικών για επαγγελματικά στούντιο

  • Ευέλικτες επιλογές πηγής που περιλαμβάνουν 1/8” είσοδο για το Smartphone σας.
  • Διπλές έξοδοι για ακουστικά με ανεξάρτητο έλεγχο έντασης
  • Ενσωματωμένο talkback-mic για εύκολη επικοινωνία με τους καλλιτέχνες
  • Υψηλής ανάλυσης οθόνη 16 βαθμίδων

Στιβαρή κατασκευή "Built-Like-A-Tank”
Συμβατό με όλα τα μεγάλα DAW και σε Mac και σε Windows
Περιλαμβάνει το software εγγραφής Traction
ProTools® | First and Waveform™ OEM professional software and plugin packages included
The Musician Collection for ProTools | First includes 22 plugins
The DAW Essentials™ Bundle for Waveform™ OEM includes 16 powerful plugins

Inputs 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line Inputs
2 x 1/4" TRS Balanced/Unbalanced Line Inputs
1 x 1/8" / 3.5 mm TRS Unbalanced Stereo Input
Outputs 2 x 1/4" TRS Balanced/Unbalanced 2-Track Line Outputs
4 x 1/4" TRS Balanced/Unbalanced Monitor Outputs
2 x 1/4" TRS Unbalanced Headphone Outputs
USB I/O 1 x USB 2.0 Type-B
Resolution 24-Bit / 192 kHz
Frequency Response 20 Hz to 20 kHz (±0.5 dB, Unity Gain, +4 dBu Input)
Noise Mic Inputs to Outputs: < -125 dBu RMS, A-Weighted (150 ohms Terminated, 22 kHz Bandwidth)
Line Inputs to Outputs: < -90 dBu RMS, Unweighted (150 ohms Terminated, 22 kHz Bandwidth)
THD + N <0.01% Unweighted (Unity Gain, 1 kHz at +4 dBu Input, 80 kHz Bandwidth)
Crosstalk < -60 dB at 1 kHz (Unity Gain, -1 dBFS Input)
Attenuation Muted: -60 dB
Dim: -20 dB
Maximum Input Level +22 dBu
Maximum Output Level +22 dBu
Power Requirements 100 to 240 VAC, 50/60 Hz, 0.75 A via Universal Power Supply
Dimensions (W x D x H) 6.4 x 9.9 x 3.2" / 16.3 x 25.1 x 8.1 cm
Weight 3.5 lb / 1.6 kg

Το HP-4 της Presonus είναι η απάντηση στην ανάγκη για πολυκάναλο επαγγελματικό προενισχυτή ακουστικών, σε μικρό μέγεθος και προσιτή τιμή. Διαθέτει 4 εξοδους ακουστικών στο μπροστινό μέρος και η κάθε μια έχει το δικό της ποντεσιόμετρο για την αυξο,είωση της έντασης του ήχου και 150mW προενίσχυσης ανά κανάλι. Το HP-4 επίσης διαθέτει και volume control για τα monitor στο control room, διακόπτη monitor mute και διακόπτη mono προσφέροντάς σας έτσι μια πανίσχυρη και ολοκληρωμένη monitoring λύση σε μια απίστευτα χαμηλή τιμή.


 

Μίνι ενισχυτής ακουστικών για κιθάρα με τεχνολογία analog modeling εξομοίωσης με κύκλωμα AC30 Top Boost. Είσοδος AUX για σύνδεση με εξωτερική πηγή ήχου. Λειτουργία με 2xAAA μπαταρίες.

Controller για studio monitors
2 εισόδους stereo balanced και 3 εξόδους balanced (2 stereo/1 mono)
2 έξοδοι ακουστικών με ξεχωριστή ρύθμιση έντασης

Analog Inputs 2 x XLR (input set 1)
2 x XLR (input set 2)
Input Impedance 20 kOhms balanced, 10 kOhms unbalanced
Input Sensitivity Input Set 1: +4 dBu
Input Set 2: +4 dBu / -10 dBV
Analog Outputs Monitor Out A: 2 x XLR, balanced
Monitor Out B: 2 x XLR, balanced
Monitor Out C: 1 x XLR, balanced
Phones: 2 x 1/4" TRS, phone type
USB USB 1.1, type-B
D/A Conversion 44.1 / 48 kHz
Frequency Response (-3 dB) < 10 Hz to 120 kHz
SNR 85 dB at 0 dB, A-weighted
CMRR > 50 dB at 1 kHz, 0 dBu input level, unity gain
THD+N 0.03% at 1 kHz, 0 dBu input level, unity gain
Crosstalk > 75 dB at 1 kHz
Attenuation Dim: -15 dB
Power Supply 100 to 240 VAC, 50 / 60 Hz
Dimensions (H x W x D) 3.3 x 8.5 x 7.8" / 84.0 x 216.0 x 199.0 mm
Weight 3.3 lb / 1.5 kg

The Behringer Monitor2USB is a monitor controller and USB audio interface designed for home and project studios. It pairs a large VCA control knob for your overall output level with the ability to select among three sets of active studio monitors, as well as two sets of headphones. With its USB jack, you can connect your computer straight to the device so that you may play music from your digital library, or you can mix straight from your DAW. Through its XLR inputs, you can route analog sound, balanced or unbalanced. 

The VCA amplifier provides several benefits. For example, it allows DC current to flow through the volume control, rather than the audio signal, and thus, bypasses any DC-related signal degradation. This also helps in making sure your stereo image doesn’t drift as you crank the volume knob; anyone who’s experienced in monitor controllers knows this can be a problem—a problem mitigated in the Monitor2USB. The volume knob itself is quite large, and this too serves a function: Such a large size allows for more precision as you turn the control, so you can achieve minutely specific level adjustments, which might be necessary as you switch from monitoring post-production projects to music mixes.

You can use its three sets of outputs in a variety of ways—for instance, you can hook up two monitors and a subwoofer, or three sets of monitors, one of which can serve as your dedicated mono check. On the headphone outputs, a crossfeed control mimics the stereo experience of sitting in front of your speakers by feeding a miniscule amount of signal from the right to the left and vice versa. Amongst other benefits, this feature helps mitigate ear fatigue over long sessions. Mono and Dim buttons are on hand to help you in the mixing process. Included with the Monitor2USB are a power cable and a full, complimentary copy of Tracktion—a DAW to help you in your recording, editing, and mixing journeys.

Key Features at a Glance
  • Large volume knob with VCA control for precise level adjustments
  • Built-in stereo USB audio interface
  • 2 high-quality stereo inputs
  • 3 independent monitor outputs to connect two stereo monitors and one mono monitor
  • 2 headphone amplifiers with separate volume controls
  • Crossfeed control emulates the stereo speaker panorama when listening through your headphones
  • Convenient Mono and Dim functions
  • Included eco-friendly power supply
  • Designed and engineered in Germany

Analog Inputs 2 x XLR (input set 1)
2 x XLR (input set 2)
Input Impedance 20 kOhms balanced, 10 kOhms unbalanced
Input Sensitivity Input Set 1: +4 dBu
Input Set 2: +4 dBu / -10 dBV
Analog Outputs Monitor Out A: 2 x XLR, balanced
Monitor Out B: 2 x XLR, balanced
Monitor Out C: 1 x XLR, balanced
Phones: 2 x 1/4" TRS, phone type
USB USB 1.1, type-B
D/A Conversion 44.1 / 48 kHz
Frequency Response (-3 dB) < 10 Hz to 120 kHz
SNR 85 dB at 0 dB, A-weighted
CMRR > 50 dB at 1 kHz, 0 dBu input level, unity gain
THD+N 0.03% at 1 kHz, 0 dBu input level, unity gain
Crosstalk > 75 dB at 1 kHz
Attenuation Dim: -15 dB
Power Supply 100 to 240 VAC, 50 / 60 Hz
Dimensions (H x W x D) 3.3 x 8.5 x 7.8" / 84.0 x 216.0 x 199.0 mm
Weight 3.3 lb / 1.5 kg

Weight1.00 kg1.20 kg2.00 kg2.00 kg0.40 kg1.50 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.00 kg
Βάρος 1.20 kg
Βάρος 2.00 kg
Βάρος 2.00 kg
Βάρος 0.40 kg
Βάρος 1.50 kg

ΔΩΡΕΑΝ ΑΠΟΣΤΟΛΗ ΣΕ ΟΛΗ ΤΗΝ ΕΛΛΑΔΑ

για αγορές άνω των 99€ και μέχρι 50 κιλά
Για απομακρυσμένες περιοχές και νησιά, τα έξοδα καλύπτονται μέχρι την πρώτη μεταφόρτωση

Εγγραφείτε στα ενημερωτικά δελτία μας

για να είστε οι πρώτοι που θα ενημερωθείτε για τις αποκλειστικές μας προσφορές
© 2024 Artsound and Lights. All rights reserved.
Click outside to hide the comparison bar
Compare