Content | Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
| Features
- Absorber panels made of high-density-foam
- Optimizes the acoustic performance of your speakers
- 3 different inclination angles
- Suitable for near-field monitors
Specifications
- Color: anthracite
- Size: M
- Dimensions: 250 x 320 mm
- Weight: 250 g
Scope of delivery
Applications
- Damping of vibrations and resonances of studio and hi-fi loudspeakers
- Correction of the inclination of studio and hi-fi loudspeakers
- Height adjustment of studio and hi-fi loudspeakers
|
Έτοιμο πακέτο που περιλαμβάνει Nano Patch+ 2x isolation pads 170mm x 300mm x 40mm και 4 xlr σε trs καλώδια 3 μέτρων.
Studio Monitor Enhancement Pack
- Nano Patch Plus
- 2x Isolation Pads: 170mm x 300mm x 40mm
- 4 XLR to TRS cables 3m included
|
Το HP-4 της Presonus είναι η απάντηση στην ανάγκη για πολυκάναλο επαγγελματικό προενισχυτή ακουστικών, σε μικρό μέγεθος και προσιτή τιμή. Διαθέτει 4 εξοδους ακουστικών στο μπροστινό μέρος και η κάθε μια έχει το δικό της ποντεσιόμετρο για την αυξο,είωση της έντασης του ήχου και 150mW προενίσχυσης ανά κανάλι. Το HP-4 επίσης διαθέτει και volume control για τα monitor στο control room, διακόπτη monitor mute και διακόπτη mono προσφέροντάς σας έτσι μια πανίσχυρη και ολοκληρωμένη monitoring λύση σε μια απίστευτα χαμηλή τιμή.
|
Παθητικό Monitor Controller .\"Fully Passive\"
Χαρακτηριστικά :
- 2 x mono balanced 1/4\" TRS (Είσοδος A)
- 2 x mono balanced 1/4\" TRS (Είσοδος B)
- 1 x stereo unbalanced 1/8\" mini jack (Είσοδος B)
- 2 x mono balanced XLR (Έξοδος A)
- 2 x mono balanced / unbalanced 1/4\" TRS (Έξοδος B)
- 1 x stereo unbalanced 1/8\" mini jack (Έξοδος B)
- Υψηλής ποιότητας ποτενσιόμετρο για τον έλεγχο της έντασης
- Διακόπτης A/B για την επιλογή της εισόδου
- Διακόπτης L/R για την εναλλαγή left & right audio channels
- Ανεξάρτητοι διακόπτες Α και Β για ενεργοποίηση ή απενεργοποίηση των εξόδων
- Mono "Downmix” ( μιξάρει το αριστερό με το δεξί κανάλι και αντίστροφα )
- Διακόπτης Mute της εξόδου
| Controller για studio monitors 2 εισόδους stereo balanced και 3 εξόδους balanced (2 stereo/1 mono) 2 έξοδοι ακουστικών με ξεχωριστή ρύθμιση έντασης
Analog Inputs |
2 x XLR (input set 1) 2 x XLR (input set 2) |
Input Impedance |
20 kOhms balanced, 10 kOhms unbalanced |
Input Sensitivity |
Input Set 1: +4 dBu Input Set 2: +4 dBu / -10 dBV |
Analog Outputs |
Monitor Out A: 2 x XLR, balanced Monitor Out B: 2 x XLR, balanced Monitor Out C: 1 x XLR, balanced Phones: 2 x 1/4" TRS, phone type |
USB |
USB 1.1, type-B |
D/A Conversion |
44.1 / 48 kHz |
Frequency Response (-3 dB) |
< 10 Hz to 120 kHz |
SNR |
85 dB at 0 dB, A-weighted |
CMRR |
> 50 dB at 1 kHz, 0 dBu input level, unity gain |
THD+N |
0.03% at 1 kHz, 0 dBu input level, unity gain |
Crosstalk |
> 75 dB at 1 kHz |
Attenuation |
Dim: -15 dB |
Power Supply |
100 to 240 VAC, 50 / 60 Hz |
Dimensions (H x W x D) |
3.3 x 8.5 x 7.8" / 84.0 x 216.0 x 199.0 mm |
Weight |
3.3 lb / 1.5 kg |
The Behringer Monitor2USB is a monitor controller and USB audio interface designed for home and project studios. It pairs a large VCA control knob for your overall output level with the ability to select among three sets of active studio monitors, as well as two sets of headphones. With its USB jack, you can connect your computer straight to the device so that you may play music from your digital library, or you can mix straight from your DAW. Through its XLR inputs, you can route analog sound, balanced or unbalanced.
The VCA amplifier provides several benefits. For example, it allows DC current to flow through the volume control, rather than the audio signal, and thus, bypasses any DC-related signal degradation. This also helps in making sure your stereo image doesn’t drift as you crank the volume knob; anyone who’s experienced in monitor controllers knows this can be a problem—a problem mitigated in the Monitor2USB. The volume knob itself is quite large, and this too serves a function: Such a large size allows for more precision as you turn the control, so you can achieve minutely specific level adjustments, which might be necessary as you switch from monitoring post-production projects to music mixes.
You can use its three sets of outputs in a variety of ways—for instance, you can hook up two monitors and a subwoofer, or three sets of monitors, one of which can serve as your dedicated mono check. On the headphone outputs, a crossfeed control mimics the stereo experience of sitting in front of your speakers by feeding a miniscule amount of signal from the right to the left and vice versa. Amongst other benefits, this feature helps mitigate ear fatigue over long sessions. Mono and Dim buttons are on hand to help you in the mixing process. Included with the Monitor2USB are a power cable and a full, complimentary copy of Tracktion—a DAW to help you in your recording, editing, and mixing journeys.
Key Features at a Glance
- Large volume knob with VCA control for precise level adjustments
- Built-in stereo USB audio interface
- 2 high-quality stereo inputs
- 3 independent monitor outputs to connect two stereo monitors and one mono monitor
- 2 headphone amplifiers with separate volume controls
- Crossfeed control emulates the stereo speaker panorama when listening through your headphones
- Convenient Mono and Dim functions
- Included eco-friendly power supply
- Designed and engineered in Germany
Analog Inputs |
2 x XLR (input set 1) 2 x XLR (input set 2) |
Input Impedance |
20 kOhms balanced, 10 kOhms unbalanced |
Input Sensitivity |
Input Set 1: +4 dBu Input Set 2: +4 dBu / -10 dBV |
Analog Outputs |
Monitor Out A: 2 x XLR, balanced Monitor Out B: 2 x XLR, balanced Monitor Out C: 1 x XLR, balanced Phones: 2 x 1/4" TRS, phone type |
USB |
USB 1.1, type-B |
D/A Conversion |
44.1 / 48 kHz |
Frequency Response (-3 dB) |
< 10 Hz to 120 kHz |
SNR |
85 dB at 0 dB, A-weighted |
CMRR |
> 50 dB at 1 kHz, 0 dBu input level, unity gain |
THD+N |
0.03% at 1 kHz, 0 dBu input level, unity gain |
Crosstalk |
> 75 dB at 1 kHz |
Attenuation |
Dim: -15 dB |
Power Supply |
100 to 240 VAC, 50 / 60 Hz |
Dimensions (H x W x D) |
3.3 x 8.5 x 7.8" / 84.0 x 216.0 x 199.0 mm |
Weight |
3.3 lb / 1.5 kg |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.