PALMER PTINOS MI TINO SYSTEM – Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input

226.00 με ΦΠΑ 24%

Σε απόθεμα

EAN: 4049521166358
Υπολογισμός δόσεων
Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Παράδοση σε 4-10 ημέρες Παράδοση σε 4-10 ημέρες Κωδικός προϊόντος: PTINOS Κατηγορία:
The Palmer TINO SYSTEM – The clever solution for switching two amps to 1 cabinet Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher […]

 

Διαβάστε περισσότερα

The Palmer TINO SYSTEM – The clever solution for switching two amps to 1 cabinet

Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.

The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)

TINO SYSTEM routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.

If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters. A sliding switch-over between the amplifiers also ensures that the process occurs click-free and without interruption. The power supply is provided via the supplied 9V power adapter.

  • Product Type: switcher
  • Type: amp switcher
  • Switching Functions: output switcher
  • Number of Inputs: 2
  • Input Connections: 6.3 mm jack
  • Input Impedance: 10 M ohm
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Output Impedance: 10 k ohms
  • Transformer-Balanced Outputs: no
  • Indicators: channel number
  • Controls: channel switching, ground lift
  • Power Supply: 9 VDC power adapter
  • Power Consumption: 130 m A
  • Cabinet Material: sheet steel/aluminium
  • Cabinet Surface: powder coated/anodised
  • Dimensions: 222 x 44 x 175 mm
  • Accessories (included): 9VDC plug-in power supply

 

 

Βάρος 1.60 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Δώστε πρώτος μία αξιολόγηση “PALMER PTINOS MI TINO SYSTEM – Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

SettingsPALMER PTINOS MI TINO SYSTEM - Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input removePALMER F 1 Universal 1-Channel Footswitch removePALMER PEABI MI EABI - Balanced Line Input Switch removeDIGITECH DOD-MINIEXP Mini Expression Pedal removePALMER PTRINITY MI T-Series - Instrument Selector removeORANGE FS-1 Ποδοδιακόπτης remove
Image
SKUPTINOSPF1PEABIDOD-MINIEXPPTRINITYG30OG00001
Rating
Price 226.00 με ΦΠΑ 24% 24.00 με ΦΠΑ 24% 61.00 με ΦΠΑ 24% 70.12 με ΦΠΑ 24% 192.55 με ΦΠΑ 24% 30.00 με ΦΠΑ 24%
Stock

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

Σε απόθεμα

AvailabilityΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμαΣε απόθεμα
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The Palmer TINO SYSTEM - The clever solution for switching two amps to 1 cabinet

Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.

The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)

TINO SYSTEM routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.

If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters. A sliding switch-over between the amplifiers also ensures that the process occurs click-free and without interruption. The power supply is provided via the supplied 9V power adapter.

  • Product Type: switcher
  • Type: amp switcher
  • Switching Functions: output switcher
  • Number of Inputs: 2
  • Input Connections: 6.3 mm jack
  • Input Impedance: 10 M ohm
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Output Impedance: 10 k ohms
  • Transformer-Balanced Outputs: no
  • Indicators: channel number
  • Controls: channel switching, ground lift
  • Power Supply: 9 VDC power adapter
  • Power Consumption: 130 m A
  • Cabinet Material: sheet steel/aluminium
  • Cabinet Surface: powder coated/anodised
  • Dimensions: 222 x 44 x 175 mm
  • Accessories (included): 9VDC plug-in power supply

 

 

This simple but robust single-channel switch can be used universally. Whenever a change of channel or function via foot switch is required. For example, the PF1 can be used to switch the channel of a guitar amp or activate a particular function on a keyboard. The switch is latching, not spring return. To connect, a standard Mono Jack cable is sufficient.

  • Type: passive
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Controls: Foot switch
  • Switch Type: latching
  • Cabinet Material: sheet steel
  • Cabinet Surface: powder-coated
  • Width: 55 mm
  • Depth: 65 mm
  • Height: 60 mm

 User's manual [1,27 MB]

The Palmer PEABI is more than a simple switcher for two sources; simultaneously, the PEABI also handles level adjustment for various sources. Whether microphone or line signal, the PEABI toggles silently between the two inputs and thus permits fast and simple comparison between signals or connection of various sources to one input. Three slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both inputs. A ground lift helps to avoid ground loop hum. Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. A red LED clearly indicates which input is currently active. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board. The PEABI's strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is required to power the LED.

Technical Specifications
  • Product type: switcher
  • Type: passive
  • Switch function: Input switcher
  • Number of channels: 2
  • Number of Inputs: 2
  • Input connections: XLR
  • Number of outputs: 1
  • Output connections: XLR
  • Outputs transformer balanced: no
  • Controls: Groundlift, Input PAD
  • Indicators: Channel number
  • Power Supply: 9-V block battery
  • Case Material: Sheet steel
  • Case surface: Powder coated
  • Dimensions (W x H x D): 100 mm x 60 mm x 120 mm

Digitech DOD Mini Expression Pedal, λειτουργία gear drive, συμβατό με τα περισσότερα πετάλια effect, επιλογέας/διακόπτης 3-position για συνδυασμό του TRS και της αντίστασης λειτουργίας, λειτουργία passive, αντιολισθητική επιφάνεια στο πάνω μέρος του πεταλιού, 6.3 mm TRS OUT jack, μεταλλική κατασκευή, λειτουργία χωρίς τροφοδοτικό ρεύματος.

The Palmer TRINITY is a 3 into 1 instrument selector for changing guitars without unplugging and the associated noise. Sturdy footswitches select the input channels with individual buffer amps providing up to 12 dB boost to balance instrument levels without changing the amp settings. In addition, the Trinity features a dedicated tuner output.

 

 

Ποδοδιακόπτης συμβατός με τα παρακάτω μοντέλα:

  • CRUSH 20 CRUSH 20RT & CRUSH 35RT (CHANNEL)
  • CRUSH PRO SERIES (CHANNEL OR REVERB)
  • TH30 AND TH100 (CHANNEL)
  • DUAL TERROR (CHANNEL)
  • AD30 (CHANNEL)
  • OR 50 (MASTER VOLUME DEFEAT)
  • CUSTOM SHOP 50 (EQ LIFT NOTE: THE LED WILL NOT ILLUMINATE AS THE CUSTOM SHOP USES PASSIVE SWITCHING CIRCUITRY)
  • ROCKERVERB (REVERB OR CHANNEL)
  • DUAL DARK (CHANNEL OR ATTENUATOR)
  • OB1-300 & OB1-500 (BLEND CONTROL)
Weight1.600.250.690.500.950.30
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.60 kg
Βάρος 0.25 kg
Βάρος 0.69 kg
Βάρος 0.50 kg
Βάρος 0.95 kg
Βάρος 0.30 kg