PALMER PTINOS MI TINO SYSTEM – Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input

258.77 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: 4049521166358
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 4-10 Ημ. Διαθέσιμο 4-10 Ημ. Κωδικός προϊόντος: PTINOS Κατηγορία:
The Palmer TINO SYSTEM – The clever solution for switching two amps to 1 cabinet Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher […]

 

Διαβάστε περισσότερα

The Palmer TINO SYSTEM – The clever solution for switching two amps to 1 cabinet

Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.

The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)

TINO SYSTEM routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.

If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters. A sliding switch-over between the amplifiers also ensures that the process occurs click-free and without interruption. The power supply is provided via the supplied 9V power adapter.

  • Product Type: switcher
  • Type: amp switcher
  • Switching Functions: output switcher
  • Number of Inputs: 2
  • Input Connections: 6.3 mm jack
  • Input Impedance: 10 M ohm
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Output Impedance: 10 k ohms
  • Transformer-Balanced Outputs: no
  • Indicators: channel number
  • Controls: channel switching, ground lift
  • Power Supply: 9 VDC power adapter
  • Power Consumption: 130 m A
  • Cabinet Material: sheet steel/aluminium
  • Cabinet Surface: powder coated/anodised
  • Dimensions: 222 x 44 x 175 mm
  • Accessories (included): 9VDC plug-in power supply

 

 

Βάρος 1.60 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “PALMER PTINOS MI TINO SYSTEM – Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

PALMER PTINOS MI TINO SYSTEM - Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input removeBOSS AB-2 ΠΕΤΑΛ FOOTSWITCH 2-WAY SELECTOR 2 ΕΙΣΟΔΟΙ/2 ΕΞΟΔΟΙ removeBLACKSTAR FS-12 Ποδοδιακόπτης removeMARSHALL PEDL-90003 ΠΟΔΟΔΙΑΚΟΠΤΗΣ ΜΟΝΟΣ removeMARSHALL PEDL-91004 Διπλός ποδοδιακόπτης removePALMER PTRINITY MI T-Series - Instrument Selector remove
NamePALMER PTINOS MI TINO SYSTEM - Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input removeBOSS AB-2 ΠΕΤΑΛ FOOTSWITCH 2-WAY SELECTOR 2 ΕΙΣΟΔΟΙ/2 ΕΞΟΔΟΙ removeBLACKSTAR FS-12 Ποδοδιακόπτης removeMARSHALL PEDL-90003 ΠΟΔΟΔΙΑΚΟΠΤΗΣ ΜΟΝΟΣ removeMARSHALL PEDL-91004 Διπλός ποδοδιακόπτης removePALMER PTRINITY MI T-Series - Instrument Selector remove
Image
SKUPTINOS689.ROL.106G30BS00002PEDL-90003PEDL-91004PTRINITY
Rating
Price 258.77 με ΦΠΑ 24% 48.00 με ΦΠΑ 24% 79.00 με ΦΠΑ 24% 37.04 με ΦΠΑ 24% 39.17 με ΦΠΑ 24% 192.55 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The Palmer TINO SYSTEM - The clever solution for switching two amps to 1 cabinet

Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.

The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)

TINO SYSTEM routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.

If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters. A sliding switch-over between the amplifiers also ensures that the process occurs click-free and without interruption. The power supply is provided via the supplied 9V power adapter.

  • Product Type: switcher
  • Type: amp switcher
  • Switching Functions: output switcher
  • Number of Inputs: 2
  • Input Connections: 6.3 mm jack
  • Input Impedance: 10 M ohm
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Output Impedance: 10 k ohms
  • Transformer-Balanced Outputs: no
  • Indicators: channel number
  • Controls: channel switching, ground lift
  • Power Supply: 9 VDC power adapter
  • Power Consumption: 130 m A
  • Cabinet Material: sheet steel/aluminium
  • Cabinet Surface: powder coated/anodised
  • Dimensions: 222 x 44 x 175 mm
  • Accessories (included): 9VDC plug-in power supply

 

 

The BOSS AB-2 is a 2-way selector that makes changing inputs or outputs easy. One stomp is all it takes to instantly switch between two guitars, change amplifiers or switch between an amp and tuner. Rock-solid BOSS construction ensures the AB-2 will stand the test of time.

  • Affordable A/B selector with 1-click operation and silent switching
  • 2-way selector for using A/B input with one output, or vice-versa
  • Instantly change guitars, amplifiers or switch between an amp and tuner


Nominal Input Level-20 dBu
Nominal output Level-20 dBu
ControlPedal
IndicatorsA (red), B (yellow)
ConnectorsA jack, B jack, IN/OUT jack
Current Draw 5 mA or less
* Expected battery life under continuous use: Carbon: 100 hours
* This figure will vary depending on the actual conditions of use.
Power SupplyDry Battery [R03/LR03 (AAA) type] x 2
AccessoriesOwner's Manual, Dry Battery [R03/LR03 (AAA) type] x 2, Number Sticker
Size and Weight
Width
96 mm3-13/16 inches
Depth
90 mm3-9/16 inches
Height
43 mm1-3/4 inches
Weight
240 g0 lbs. 9 oz.

Multi - function ποδοδιακόπτης με συμπαγή κατασκευή και χαμηλό προφίλ, αλουμινένια ανθεκτική κατασκευή, παρέχει πρόσβαση στα 36 patches του ID:CORE 100 / ID:CORE 150. Μεγάλη οθόνη Dot Matrix που προσφέρει καλή ορατότητα στον κιθαρίστα. Έλεγχος Modulation, Delay, Reverb on / off, Modulation and Delay tap tempo, Full looper λειτουργία, Effects loop on / off, Super Widestereo on / off, Noise Gate on / off, Διαστάσεις 336 x 37 x 73 χιλ, Βάρος 0,66 κιλά.

  • Function on/off
  • Without LED
  • 5m cable
  • Screwed steel housing
  • Kink protection and cable feed-through
  • Mono jack
  • “Channel" label
  • Suitable for all amplifiers with simple on/off switch
  • Dimensions: 84 x 45 x 112 mm
  • Compatible with: Marshall DSL50, DSL100, DSL401, EL34 50/50, EL34 100/100, EL84 20/20, MB30, MB60, MB150, G30RCD, G50RCD, G80RCD, G100RCD, JCM600, JCM601, JCM602, JTM612, JTM60, JTM622, JTM610, JTM615, MG30DFX, JTM312, JTM310, VS30R, 1962, 2555SL, 2100, 2500, 7400, 7200, 72115, 72410, 9100, 9200, 8040, 3520, 5522, 9004
Dimensions 84 x 45 x 112 mm
Compatible with Marshall DSL50, DSL100, DSL401, EL34 50/50, EL34 100/100, EL84 20/20, MB30, MB60, MB150, G30RCD, G50RCD, G80RCD, G100RCD, JCM600, JCM601, JCM602, JTM612, JTM60, JTM622, JTM610, JTM615, MG30DFX, JTM312, JTM310, VS30R, 1962, 2555SL, 2100, 2500, 7400, 7200, 72115, 72410, 9100, 9200, 8040, 3520, 5522, 9004
LED Display No
Connector Jack
Number of Buttons / Switches 1
Function of Buttons / Switches Switch
Number Of Pedals 0

Διπλός ποδοδιακόπτης για ενισχυτές MARSHALL γενικής χρήσης (no led).

The Palmer TRINITY is a 3 into 1 instrument selector for changing guitars without unplugging and the associated noise. Sturdy footswitches select the input channels with individual buffer amps providing up to 12 dB boost to balance instrument levels without changing the amp settings. In addition, the Trinity features a dedicated tuner output.

 

 

Weight1.60 kg0.24 kg0.66 kg0.51 kg1.00 kg0.95 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.60 kg
Βάρος 0.24 kg
Βάρος 0.66 kg
Βάρος 0.51 kg
Βάρος 1.00 kg
Βάρος 0.95 kg