PALMER PTINOS MI TINO SYSTEM – Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input

258.77 με ΦΠΑ 24%

Διαθέσιμο κατόπιν παραγγελίας

EAN: 4049521166358
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 4-10 Ημ. Διαθέσιμο 4-10 Ημ. Κωδικός προϊόντος: PTINOS Κατηγορία:
The Palmer TINO SYSTEM – The clever solution for switching two amps to 1 cabinet Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher […]

 

Διαβάστε περισσότερα

The Palmer TINO SYSTEM – The clever solution for switching two amps to 1 cabinet

Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.

The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)

TINO SYSTEM routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.

If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters. A sliding switch-over between the amplifiers also ensures that the process occurs click-free and without interruption. The power supply is provided via the supplied 9V power adapter.

  • Product Type: switcher
  • Type: amp switcher
  • Switching Functions: output switcher
  • Number of Inputs: 2
  • Input Connections: 6.3 mm jack
  • Input Impedance: 10 M ohm
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Output Impedance: 10 k ohms
  • Transformer-Balanced Outputs: no
  • Indicators: channel number
  • Controls: channel switching, ground lift
  • Power Supply: 9 VDC power adapter
  • Power Consumption: 130 m A
  • Cabinet Material: sheet steel/aluminium
  • Cabinet Surface: powder coated/anodised
  • Dimensions: 222 x 44 x 175 mm
  • Accessories (included): 9VDC plug-in power supply

 

 

Βάρος 1.60 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “PALMER PTINOS MI TINO SYSTEM – Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

PALMER PTINOS MI TINO SYSTEM - Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input removeVOX VFS-5 Ποδοδιακόπτης για ενισχυτές VOX VT Series removeELECTRO-HARMONIX Nano Switchblade ΠΕΝΤΑΛ removeORANGE FS-1 Ποδοδιακόπτης removePALMER PTRINITY MI T-Series - Instrument Selector removePALMER PEABO MI EABO - Balanced Line Output Switch remove
NamePALMER PTINOS MI TINO SYSTEM - Switching System 2 Guitar Amplifiers to 1 Cabinet with Remote Input removeVOX VFS-5 Ποδοδιακόπτης για ενισχυτές VOX VT Series removeELECTRO-HARMONIX Nano Switchblade ΠΕΝΤΑΛ removeORANGE FS-1 Ποδοδιακόπτης removePALMER PTRINITY MI T-Series - Instrument Selector removePALMER PEABO MI EABO - Balanced Line Output Switch remove
Image
SKUPTINOSVFS-5G05EH00033G30OG00001PTRINITYPEABO
Rating
Price 258.77 με ΦΠΑ 24% 82.15 με ΦΠΑ 24%42.00 με ΦΠΑ 24% 34.00 με ΦΠΑ 24% 192.55 με ΦΠΑ 24% 69.00 με ΦΠΑ 24%
Stock

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

The Palmer TINO SYSTEM - The clever solution for switching two amps to 1 cabinet

Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO SYSTEM promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.

The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)

TINO SYSTEM routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.

If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters. A sliding switch-over between the amplifiers also ensures that the process occurs click-free and without interruption. The power supply is provided via the supplied 9V power adapter.

  • Product Type: switcher
  • Type: amp switcher
  • Switching Functions: output switcher
  • Number of Inputs: 2
  • Input Connections: 6.3 mm jack
  • Input Impedance: 10 M ohm
  • Number of Outputs: 1
  • Output Connections: 6.3 mm jack
  • Output Impedance: 10 k ohms
  • Transformer-Balanced Outputs: no
  • Indicators: channel number
  • Controls: channel switching, ground lift
  • Power Supply: 9 VDC power adapter
  • Power Consumption: 130 m A
  • Cabinet Material: sheet steel/aluminium
  • Cabinet Surface: powder coated/anodised
  • Dimensions: 222 x 44 x 175 mm
  • Accessories (included): 9VDC plug-in power supply

 

 

Ποδοδιακόπτης για ενισχυτές VOX VT Series

Πετάλι που επιτρέπει την εναλλαγή του σήματος ανάμεσα σε δύο ενισχυτές, pedal boards ή καμπίνες. Δεν χρειάζεται ξεχωριστή τροφοδοσία.

Ποδοδιακόπτης συμβατός με τα παρακάτω μοντέλα:

  • CRUSH 20 CRUSH 20RT & CRUSH 35RT (CHANNEL)
  • CRUSH PRO SERIES (CHANNEL OR REVERB)
  • TH30 AND TH100 (CHANNEL)
  • DUAL TERROR (CHANNEL)
  • AD30 (CHANNEL)
  • OR 50 (MASTER VOLUME DEFEAT)
  • CUSTOM SHOP 50 (EQ LIFT NOTE: THE LED WILL NOT ILLUMINATE AS THE CUSTOM SHOP USES PASSIVE SWITCHING CIRCUITRY)
  • ROCKERVERB (REVERB OR CHANNEL)
  • DUAL DARK (CHANNEL OR ATTENUATOR)
  • OB1-300 & OB1-500 (BLEND CONTROL)

The Palmer TRINITY is a 3 into 1 instrument selector for changing guitars without unplugging and the associated noise. Sturdy footswitches select the input channels with individual buffer amps providing up to 12 dB boost to balance instrument levels without changing the amp settings. In addition, the Trinity features a dedicated tuner output.

 

 

The Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to one of two different inputs.

  • Onstage, switch your vocal mike between FOH and monitor mixing desk so you can communicate with the monitor mixer or the band in private.
  • Two different sound configurations. Suppose you sometimes want a different effect or sound on your microphone, for example, a "telephone effect" or more Hall. Run both outputs of the PEABO to two channels of the mixing desk - now you can configure these differently and toggle between the two channels onstage whenever you want.
  • You can also use the PEABO to address two different rooms or zones selectively.

Switching is controlled by a sturdy latching foot switch; the selected output is indicated by a red LED. Slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both outputs. A ground lift helps to avoid ground loop hum.

Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board.

The PEABO's strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is only required to power the LED.

 

 

Weight1.60 kg2.00 kg1.00 kg0.30 kg0.95 kg0.64 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.60 kg
Βάρος 2.00 kg
Βάρος 1.00 kg
Βάρος 0.30 kg
Βάρος 0.95 kg
Βάρος 0.64 kg