PALMER PWT12 MI PWT 12 – Universal Pedalboard Power Pack 12 Outputs

The PWT12 is universal pedal board power supply with 12 outputs electrically isolated in pairs. Outputs 1 - 8 provide 9 V DC each with a maximum current draw of 250 mA per pair. Outputs 7 and 8 additionally feature a polarity switch to change the center pin from negative to positive (and the barrel to negative).

Outputs 9/10 provide 18 V DC each with a maximum current draw of 125 mA. Additionally, the upper output is switchable to 12 V DC. Providing 9 V DC/250 mA, outputs 11/12 are also switchable to 12 V AC. The green indicator LEDs turn red when alternative ouput voltages are selected.

All output pairs are individually protected against shorts and overload. When a fuse trips the LED indicator of the corresponding pair goes out. After the fault condition has been removed the fuse is automatically reset, and within a few seconds the output resumes operation indicated by the illuminated LED.

The toroidal transformer and the steel housing of the PWT12 provide smooth FX operation free of interference and hum pickup. Mains power input is switchable between 115 V and 230 V.

The PWT12 features two brackets for easy pedal board mounting while a cover plate protects the DC plugs. The DC cables can be fixed to the plate with cable ties for strain relief. The PWT12 comes with a set of 12 long DC cables.

• Universal power supply for effect pedals
• 12 outputs on barrel-style DC connectors with 2.1 mm center pin
• regulated DC output, all outputs electrically isolated in pairs
• Outputs 1/2, 3/4, 5/6: 9 VDC each, 250 mA per pair, center pin negative, green LED indicators
• Outputs 7/8: 9 VDC, 250 mA/pair, switchable polarity, two-color LED, green = center pin negative, red = center pin positive
• Outputs 9/10: 2x 18VDC (LED = green), switchable to 1x 12VDC / 1x 18VDC (LED = red), maximum current 125mA/pair, center pin negative
• Short circuit protection per pair with automatic reset
• 115 V / 230 V switchable
• Mains fuse: 5 x 20 mm fine wire, 115 V = T 500 mA;  230 V = T 250 mA
• Toroidal transformer, 20 VA continuous

Πολυτροφοδοτικό της MXR με οκτώ 9V εξόδους και δύο 18V.Το πολυτροφοδοτικό της MXR αποτελεί τον σταθερότερο και ασφαλέστερο τρόπο για να λειτουργήσετε τα πετάλια σας ταυτόχρονα. Το DC Brick επιπλέον λειτουργεί και σαν μέσο συντήρησης των πεταλιών αλλά και σαν ρυθμιστής του εισερχόμενου ηλεκτρικού ρεύματος. 

• υποδοχές: 8 x 9V
• και υποδοχές, 2 x 18V
• συνολική ισχύς 2000 mA,
• στιβαρό μεταλλικό περίβλημα,
• συμπεριλαμβάνονται τροφοδοτικό και τα απαραίτητα (1) τμχ Καλώδια σύνδεσης 
• διαστάσεις: 104 x 28 x 59 χιλιοστά.

The Korg KA189 Power Supply is a power supply, for microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron, with 9V voltage, and 1100mA output current.

The main features of the Korg KA189 Power Supply include:

• Suitable for: microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron
• Voltage: DC
• Output Current: 1100 mA
• Output Voltage: 9V

User\'s manual

• Fully regulated universal pedalboard power supply
• 8 standard center negative outlets with 2,000 mA output total
• Two 9, 12 or 18 V switchable outputs
• Short circuit and overload protection for each outlet
• Bright power and outlet status LED indicators
• DC cables, Y cable and mains adapter included

The PWT 08 is a universal pedalboard power supply with huge 2,000 mA output capacity and 8 standard center negative outlets. Two of these are switchable to 9, 12 or 18 volts, and with the included Y cable they can be combined to a single outlet for 21, 24, 30 or 36 volts maximum output. They are isolated from each other and the remaining outlets. Featuring short circuit and overload protection, the PWT 08 is fully regulated to deliver constant voltage. The unit sports a power on LED, bi-color outlet status LEDs and comes with a set of DC cables and dedicated mains adapter. The PWT 08 is the ideal choice if you have just one or two power hungry pedals or 9 volt effects that can be run on higher DC currents for more dynamics and headroom.

• Connector: Coaxial connector (negative pole inside) to 3.5 mm (1/8“) mini-connector (positive pole on tip)
• For older Dunlop, MXR, DOD, Frantone, Pro Co and Electro Harmonix effects with mini-jack connector

User\'s manual

• Fully regulated universal pedalboard power supply
• 4 standard centre negative outputs with 1,000 mA output total
• Short circuit and overload protection for each outlet
• DC cables and mains adapter included

The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.

The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.