| Content |
Ένα 15-band Stereo Graphic Equalizer, από τη Phonic με Low cut filter για την αποφυγή ανεπιθύμητων χαμηλών-low frequency ήχων, 4 LED level και input gain control. Επίσης διαθέτει Balanced XLR and 1/4' TRS εισόδους και εξόδους, έξοδο mono subwoofer με ρυθμιζόμενο crossover frequency και ισχυρή- ανθεκτική κατασκευή.
- Low cut filter to remove unwanted low frequency sounds
- Extremely accurate 4-segment LED level meter and input gain control
- Balanced XLR and 1/4" TRS inputs and outputs
- Mono subwoofer output with adjustable crossover frequency
- Shielded toroidal power transformer for ultra low-noise
- Sturdy all-metal chassis
|
High-Definition 31-Band Stereo Graphic Equalizer with FBQ Feedback Detection System
- Professional 31-band stereo graphic equalizer for live and studio applications
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
- Ultra-low noise 4580 operational amplifiers for highest signal integrity
- Dedicated mono subwoofer output with adjustable crossover frequency
- Additional sweepable high and low-cut filters for each channel remove unwanted frequencies, e.g. floor rumble, hiss etc.
- Highly accurate 12-segment LED input/output metering and input gain controls for easy level setting
- Relay-controlled hard-bypass with an auto-bypass function during power failure (fail-safe relay)
- Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
- “Planet Earth" switching power supply for maximum flexibility (100
- 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving - 3-Year Warranty Program*
- Conceived and designed by BEHRINGER Germany
|
- Professional 15-band stereo graphic equalizer for live and studio applications
- Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
- Ultra-low noise 4580 operational amplifiers for highest signal integrity
- Dedicated mono subwoofer output with adjustable crossover frequency
- Additional low-cut filter removes unwanted frequencies, e.g. floor rumble
- Highly accurate 4-segment LED output metering and input gain controls for easy level setting
- Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
- “Planet Earth" switching power supply for maximum flexibility (100
- 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving - 3-Year Warranty Program*
- Designed and engineered in Germany
|
Μονοκάναλο equalizer εμπνευσμένο από το κλασικό Neve 1073, με ζεστό και μουσικό ήχο σε πολύ προσιτή τιμή.
Το EQ-73 αποτελεί ουσιαστικά το eq section του Neve 1073 χωρίς το φίλτρο high-pass, ενώ έχουν προστεθεί περισσότερες συχνότητες οι οποίες λειτουργούν με ρυθμίσεις stepped στα πρότυπα της vintage μονάδας για καλύτερη δυνατότητα ανάκλησης των ρυθμίσεων. Συνολικά, το εύρος των ρυθμίσεων είναι από 20Hz εως 24kHz με κέρδος +/-15dB για τις δύο χαμηλότερες μπάντες και +/-18dB για την υψηλή μπάντα.
Συνδυάζοντας το Pre-73, το EQ-73 και ένα Unite Rack, έχετε την αυθεντική μονάδα Neve σε ασυναγώνιστη τιμή!
Χαρακτηριστικά:
- Vintage Style electronics
- Ρύθμιση stepped για την επιλογή συχνοτήτων
- Μεγάλο εύρος επιλογής από 20Hz ως 24kHz
- Εύρος ελέγχου -/+18dB
- Χωριστοί διακόπτες bypass για κάθε μπάντα
- Σχεδιασμένο για να χρησιμοποιείται με το insert jack του Pre-73
- TRS in/out jack, 18dBu nominal level
- Εξωτερική τροφοδοσία
- Κλασικός ήχος, ιδανικός για κάθε μουσικό στυλ
- Συμπαγής, ανθεκτική κατασκευή
|
Νέα έκδοση S γραφικού equalizer 1/3 της οκτάβας, 2x31 περιοχών constant Q. Επιλεγόμενο εύρος αυξομείωσης 6/12dB, φίλτρο αποκοπής χαμηλών συχνοτήτων στα 40Hz με 12dB ανά οκτάβα. Iσορροπημένες (balanced) είσοδοι και έξοδοι με XLR & TRS jacks, δυναμική περιοχή 108dB, 2U.
INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot)
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot)
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 100 ohm, unbalanced 50 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)
SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +0.5/-1dB
Frequency Response: 50kHz, +0.5/-3dB
Dynamic Range: Typicall >112dB
Signal-to-Noise: Typically >95dB
THD+Noise: |
DBX 1215
Ισοσταθμιστής 2 x 15 περιοχών με XLR IN/OUT
1215 Dual 15-Band Graphic Equalizer
The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.
The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.
- Switchable boost/cut ranges of ±6 or ±15 dB
- Electronically balanced/unbalanced inputs
- Servo balanced/unbalanced inputs
- RF filtered inputs and outputs
- XLR, Barrier Strip, and 1/4" TRS connectors
- -12dB/+12dB input gain range
- 18dB/octave 40Hz Bessel low-cut filter
- Chassis/signal ground lift capability
- Internal power supply transformer
- Power-off hardwire relay bypass with 2-second power-up delay
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.