Content |
Transmits both pre-amp out and LFE signals
Eliminates subwoofer cables, sending uncompressed bass signals to your subwoofer
Has an external antenna for up to 50 feet of high-quality transmission
Transmitter dimensions: 1" x 5" x 3“
Receiver dimensions: 2-3/4" x 1-3/4" x 1-3/4“
Converts any of the subwoofers
Pro440wi- Pro550wi – Pro660wi literally in seconds. |
Amplification: Class-D Digital Peak: 150 W x 2 @ 4 ohms
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs: Optical, AUX, RCA, USB-A for firmware updates and
phone charging, Ethernet
Outputs: Left and Right Speaker Binding posts, LFE |
Μουσικά Streaming υψηλής ποιότητας από την αγαπημένη σας φορητή συσκευή με τον μετατροπέα ήχου Bluetooth, το νέο miniBlink. Κατασκευασμένο από την Arcam, το miniBlink χρησιμοποιεί το σύστημα μετάδοσης APTX και επιτρέπει σε κάθε συσκευή αναπαραγωγής μουσικής εξοπλισμένη με Bluetooth να στείλει γρήγορα και εύκολα μουσική κατ \'ευθείαν σε ένα σύστημα Hi-Fi ή σε αυτο-ενισχυόμενα (active) ηχεία με εκπληκτική ποιότητα. To miniBlink χρησιμοποιεί το high-end DAC PCM 5102 για να μετατρέψει τη μουσική από ψηφιακό σε αναλογικό σήμα έτοιμο για σύνδεση σε μια ολόκληρη σειρά συστημάτων ήχου. Η εγκατάσταση είναι εύκολη με ένα απλό σύστημα "ζευγαρώματος” μέσω Bluetooth.
Streaming high quality music from your favourite mobile device is now easy with the miniBlink Bluetooth audio converter.
Engineered by Arcam, and using the aptX™ transmission system, the miniBlink allows any Bluetooth equipped music device to quickly and easily send music straight to a Hi-Fi system with stunning quality.
The miniBlink uses a high-end PCM 5102 DAC to convert music to a line level output ready for connection to a whole host of audio systems. Installation is easy with a simple pairing system for new devices. Music is delivered by Arcam electronics so you can be sure of world-class sound quality too!
Specifications
- DAC
Burr-Brown/TI PCM5102
- Frequency Response
10Hz-20kHz, +0 -0.2dB
- Total Harmonic Distortion + Noise
0.002%
- Signal-to-noise ratio (A-weighted)
106dB (24-bit)
- Maximum output level
2.15V RMS
- Supported CODECS
SBC, AAC, aptX™
- Power requirements
0.7W maks.
- Dimensions
L 60 x W 30 x H 75mm
- Weight
40g
- EAN/UPC code
5 060133 602194
-
|
Sound Bar Drivers: 6 x 3.0” mid woofer drivers, 3 x 1”
aluminum dome tweeters
Wireless Connectivity: 2.4GHz & 5.8GHz
Inputs/Outputs: HDMI 1.4a in (3), HDMI 1.4a out (1),
Toslink Optical input (1), Analog 3.5 mm mini-jack AUX
(1), USB-A for firmware updates and phone charging
Sub Drivers: Drivers: 1 x 8” sub
Wireless Sub
Wireless Connectivity: 2.4GHz & 5.8GHz
|
Pro-Ject Audio Bluetooth Box E Ασύρματος Δέκτης
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Το αποτελεσματικό εύρος ασύρματου σήματος |
έως 10 μέτρα σε περίπτωση άμεσης ορατότητας |
Έξοδος επιπέδου γραμμής: |
1 x RCA/Cinch |
Έξοδος τόμοςtage: |
2Vrms |
Digitalηφιακές έξοδοι: |
1 x οπτικό (TOSlink®) |
Έκδοση BT: |
2.1 + EDR |
Υποστηριζόμενοι κωδικοποιητές: |
aptX, SBC, A2DP BT profile |
Συχνότητα: |
2402 ~ 2480 MHz |
Ευαισθησία: |
- 84dBm |
Μέγιστη ισχύς TX |
+ 4dBm |
Τροφοδοσία εξωλέμβιας: |
9V / 300mA DC |
Κατανάλωση ρεύματος: |
100mA/9V DC, <1W σε κατάσταση αναμονής |
Διαστάσεις Π x Υ x Β (Δ με πρίζες) Βάρος: |
120 x 32 x 100 χιλιοστών |
Βάρος: |
250g χωρίς τροφοδοτικό |
|
The new irDAC-II continues the story adding Bluetooth connectivity, headphone output and DSD128 support. The irDAC-II comes packed with cutting edge technology and features that will benefit the most demanding user. We have gained a lot of knowledge developing class leading DACs. Areas like isolation of the digital and analogue stages, ultralow noise power supplies and a direct coupled signal path make a big difference. We use the outstanding ESS Sabre DAC to obtain performance that we believe will be unmatched in this price category. Jitter reduction is an obsession within our engineering team. They have applied their experience in the irDAC-II to produce a signal that is almost jitter free. The headphone output stage has been taken from the flagship A49 amplifier and is capable of driving the most demanding of headphones. Both fixed and variable line outputs are also available, allowing for ultimate system building flexibility.
The irDAC-II is designed to be the heart of a digital system and can be connected to a host of different types of digital sources and connections. This includes asynchronous USB and Bluetooth. All of the inputs can be controlled through an IR remote that will also give you transport control of a PC or Mac USB source via the HID (Human Interface Device) control.
• Mini component wireless DAC • High performance headphone amplifier • AptX Bluetooth wireless streaming • ESS ES9016 Sabre DAC chipset • High precision digital reclocking • Up to 24/384 via USB • Up to 24/192 via coax • Up to 24/96 via optical • DSD128 via USB • Isolated digital and analog direct coupled circuits • Individually regulated power supplies • 2x digital coax inputs Fixed and variable • Headphone output (30 to 600Ω) • 4 layer PCB • Aluminum case with non‐slip rubber base • 12V external power supply included • Mini remote control included • Weight: 2.4 lbs (1.1kg) • Packaged weight: 5 lb (2.1 kg) • Packaged dimensions (W x D x H): 10.1\'\' x 12.1\'\' x 2.3\'\' (260 x 310 x 60mm) • EAN: 506013360254‐5
Supported sample rates:
- USB: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 384kHz
- Optical: 44.1kHz, 48kHz, 88.2kHz, 96kHz
- Coaxial: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
- Bluetooth: SBC, AAC, aptX, aptX:LL
- Bit Depth : 16:bit, 24:bit
- Headphone : 30Ω : 600Ω, 3.5mm plug
- Power requirements: 18W max
- Dimensions: W194 x H44 x D124mm
- Weight: 1.1kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.