Content | OVERALL
- Total Pieces:2
- Included Accessories:• (1) Wall Mounting Template
• (2) Power Adapters
• (2) Power Cords
• (1) Quick Start Guide
• (1) Registration Card
- Warranty:Yes
- Carton 1:6.34" (16.1 cm) h x 13.46" (34.19 cm) w x 10.35" (26.29 cm) d -
SR1 WIRELESS SURROUND SPEAKERS
- Qty Included:Pair
- Orientation:Horizontal
- Rear Array Driver Complement:• (1) 3" (7.62 cm) d (Round) Left Rear Surround - Mid/Woofer
• (1) 3" (7.62 cm) d (Round) Right Rear Surround - Mid/Woofer
- Mounting Type:-
- Available Orientations:Horizontal
- Mounting Type:1/4 in - 20 Threaded Insert and Keyhole Hanger
- Available Orientations:Horizontal
- Audio Inputs:-
- Speaker Inputs:Wireless streaming from the MagniFi MAX sound bar system
SURROUND SPEAKER DIMENSIONS
- Orientation:Horizontal
- Height (on table):4.4” (113.1mm)
- Depth (on table):4” (103.8mm)
- Height (wall mounted):4.5” (116.3mm)
- Depth (wall mounted):3.6” (93mm)
- Width:7.8” (198.89mm)
|
imensions | Metric :40" W x 4-1/4" D x 4-1/4" H: speaker only, not including bracket | 101.6 x 10.5 x 10.5 cm
Driver Complement :Three 3-1/4" BDSS drivers with Axially Aligned 3/4" pure aluminum dome tweeters; Two 3-1/4" BDSS High-output full-range drivers; Four 3" full-range high-output surround drivers
Frequency Response :60 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :89dB
Recommended Associated Amplifier Power :20 – 175 watts
A/V Receiver Crossover Setting :140 Hz
Inputs :Five pairs of 5 way binding posts
Mounting Options :Horizontally: wall or shelf mounting with included bracket and leveler foot
Available Finishes :Gloss Black
Warranty :5 Years
Weight | Metric :20 lbs | 9.1 kg
Enclosure :Aircraft grade extruded aluminum |
2 x 4 ½ ¨ Dynamic Balance
Polypropylene Driver
1 x 1¨ Silk Dome tweeter
Amplifier Power 20-150 W/ch
Impedance 8 Ohms
Sensitivity 91dB
Dimensions (cm) 16 x 40 x 10
|
System Format: 2 Way
Frequency Response: 60 Hz - 60 kHz
Sensitivity (1W@1M): 87 dB
Nominal Impedance: 8 ohms
Maximum S.P.L
(Per pair in room): 110.8 dBA
Power Handling (RMS): 100 W
Recommended Amplifier Requirements (RMS): 50 - 100 W
Bass Alignment: Sealed Cabinet
Crossover Frequency: Bi-Pole: 2.3 kHz
Di-Pole: 2.6 kHz
Drive Unit Compliment: 1 x 6.5" RST bass driver
2 x 4" RST mid-range driver
1 x C-CAM H.F ribbon transducer
2 x 1" gold dome C-CAM Tweeter
External Dimensions excl Stand (H x W x D)
310 x 390 x 160 mm
(12 13/16 x 15 3/8 x 6 5/16 inch)
Weight (each) Excluding stands: 11.9 Kg (26.1 lbs)
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
Dimensions | (Metric) :11-3/8" W x 7-3/4" D x 22-1/8" H | 28.9 x 19.7 x 56.2cm
Driver Complement :Four 6-1/2" cast-basket bass/midrange drivers; Two 1" pure aluminum dome tweeters
Frequency Response :31 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :90 dB
Recommended Associated Amplifier Power :20 - 400 watts
A/V Receiver Crossover Setting :40 Hz
Packaging :One to a carton
Available Finishes :Piano-Gloss Black
Accessories :Keyhole Hanging Bracket
Inputs :One set of five way binding posts
Warranty :5 Years
Weight | (Metric) :27 lbs | 12.2 kg |
Driver Complement
Mid/Woofer 1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Midrange 1 - 3-1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Dynamic Balance Enhanced Ring Radiator tweeter
Electrical
Overall Frequency Response 45Hz-40kHz
Lower -3dB Limit 55Hz
Upper -3dB Limit 30kHZ
Nominal Impedance Compatible with 8 Ohm outputs ohms
Recommended Amplifier Power 20-200 w/channel
Efficiency 83 dB
Crossover Orth Crossover design
Crossover
(mid-high array) 2400Hz
Inputs Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 16-1/4" H x 19-23/25" W x 6-3/4" D
(41.27cm H x 50.60cm W x 17.14cm D)
Mounting Options keyhole slots for wall mounting; pedestal for shelf mounting
Enclosure Type Sealed
Enclosure Type
(subwoofer) PowerPort Bass venting
Shipping/Other
Product Weight 28.90 lbs. (13.11kgs)
Shipping unit: pair
Total Shipping Weight 62.10 lbs. (28.17kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.