Power Dynamics PDD900 Digital Amplifier 2x450W 4ohm

304.00 με ΦΠΑ 24%

Σε απόθεμα

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο 1-3 Ημ. Διαθέσιμο 1-3 Ημ. Κωδικός προϊόντος: PDD-900 Κατηγορία:
Ενισχυτής 2 x 450W, της σειράς PDD. Η σειρά PDD διαφέρει απο τις άλλες, γιατι υιοθετεί την τεχνολογία Class D. Το κόστος είναι ανάλογο της Class A/B, αλλά η ισχύς, αξιοπιστία και απόδοση είναι σε σημαντικά υψηλότερα επίπεδα. Οι ενισχυτές της σειράς PDD είναι ιδανικοί για επαγγελματική χρήση. Λόγω του χαμηλού βάρους και του μεγέθους […]

 

Διαβάστε περισσότερα

Ενισχυτής 2 x 450W, της σειράς PDD. Η σειρά PDD διαφέρει απο τις άλλες, γιατι υιοθετεί την τεχνολογία Class D. Το κόστος είναι ανάλογο της Class A/B, αλλά η ισχύς, αξιοπιστία και απόδοση είναι σε σημαντικά υψηλότερα επίπεδα. Οι ενισχυτές της σειράς PDD είναι ιδανικοί για επαγγελματική χρήση. Λόγω του χαμηλού βάρους και του μεγέθους 1U, αυτός ο ενισχυτής είναι εύκολο να μεταφερθεί και πιάνει ελάχιστο χώρο.


  • Εξαιρετική ποιότητα και αξιοπιστία
  • Stereo-Mono-Bridge Λειτουργίες
  • Ενδείξεις LED
  • Balanced XLR είσοδοι και έξοδοι
  • NL-4 Έξοδοι ηχείων
  • Υψηλής απόδοσης και αξιοπιστίας παροχή ρεύματος με τεχνολογία powerfactor correction (PFC)
  • Soft start , clip limiter, power limiter, thermal cut, DC, AC, shortcircuit
  • Αναβαθμισμένος ανεμιστήρας με μαγνητική έδραση για μεγαλύτερη απόδοση.

Output power: 8 Ohms

2x 300W (RMS)
Output power: 4 Ohms 2x 450W (RMS)
Output power: Bridged 8 Ohms 900W (RMS)
Frequency response 20Hz – 20kHz
Input 21dB/9V
Signal to noise ratio >90dB
Damping Factor >300
Slew Rate 20V/us
Crosstalk >70dB
Input sensitivity 0.775V/32dB/1.0V
Input impedance 20kOhm balanced
Power supply 230Vac – 50Hz
Dimensions 482 x 212 x 44mm
Weight 3.2kg
Βάρος 32.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “Power Dynamics PDD900 Digital Amplifier 2x450W 4ohm”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

Power Dynamics PDD900 Digital Amplifier 2x450W 4ohm removeRCF ED600 EXTENDED DYNAMIC STEREO POWER AMPLIFIERS 600W, 2 IN removeRCF HPS1500 Επαγγελματικός ενισχύτης CLASS H removeAMERICAN AUDIO VLP 1000 - Τελικός Ενισχυτής 2x500 Watts removeLD Systems DEEP2 600 Τελικός Ενισχυτής 2 x 300 W 2 Ohms removeBITTNER AUDIO BASIC 800 ΕΝΙΣΧΥΤΗΣ 2x400W@4Ω POWER AMPLIFIER remove
NamePower Dynamics PDD900 Digital Amplifier 2x450W 4ohm removeRCF ED600 EXTENDED DYNAMIC STEREO POWER AMPLIFIERS 600W, 2 IN removeRCF HPS1500 Επαγγελματικός ενισχύτης CLASS H removeAMERICAN AUDIO VLP 1000 - Τελικός Ενισχυτής 2x500 Watts removeLD Systems DEEP2 600 Τελικός Ενισχυτής 2 x 300 W 2 Ohms removeBITTNER AUDIO BASIC 800 ΕΝΙΣΧΥΤΗΣ 2x400W@4Ω POWER AMPLIFIER remove
Image
SKUPDD-900ED600HPS1500E003175LDDP600BASIC800
Rating
Price304.00 με ΦΠΑ 24% 585.89 με ΦΠΑ 24% 596.44 με ΦΠΑ 24% 592.00 με ΦΠΑ 24% 450.00 με ΦΠΑ 24% 731.60 με ΦΠΑ 24%
Stock

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

AvailabilityΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΣε απόθεμαΔιαθέσιμο κατόπιν παραγγελίας
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Ενισχυτής 2 x 450W, της σειράς PDD. Η σειρά PDD διαφέρει απο τις άλλες, γιατι υιοθετεί την τεχνολογία Class D. Το κόστος είναι ανάλογο της Class A/B, αλλά η ισχύς, αξιοπιστία και απόδοση είναι σε σημαντικά υψηλότερα επίπεδα. Οι ενισχυτές της σειράς PDD είναι ιδανικοί για επαγγελματική χρήση. Λόγω του χαμηλού βάρους και του μεγέθους 1U, αυτός ο ενισχυτής είναι εύκολο να μεταφερθεί και πιάνει ελάχιστο χώρο.


  • Εξαιρετική ποιότητα και αξιοπιστία
  • Stereo-Mono-Bridge Λειτουργίες
  • Ενδείξεις LED
  • Balanced XLR είσοδοι και έξοδοι
  • NL-4 Έξοδοι ηχείων
  • Υψηλής απόδοσης και αξιοπιστίας παροχή ρεύματος με τεχνολογία powerfactor correction (PFC)
  • Soft start , clip limiter, power limiter, thermal cut, DC, AC, shortcircuit
  • Αναβαθμισμένος ανεμιστήρας με μαγνητική έδραση για μεγαλύτερη απόδοση.

Output power: 8 Ohms


2x 300W (RMS)
Output power: 4 Ohms 2x 450W (RMS)
Output power: Bridged 8 Ohms 900W (RMS)
Frequency response 20Hz - 20kHz
Input 21dB/9V
Signal to noise ratio >90dB
Damping Factor >300
Slew Rate 20V/us
Crosstalk >70dB
Input sensitivity 0.775V/32dB/1.0V
Input impedance 20kOhm balanced
Power supply 230Vac - 50Hz
Dimensions 482 x 212 x 44mm
Weight 3.2kg

The high efficiency of the ED series enables maximum efficiency with low heat generation.

A new and unique Class-H circuity technology using state of the art SMD Surface Mount Technology with a reduced number of components offering performance levels exceeding audiophile levels like a slew rate of 50V/µs and high-end extended dynamic sound. The amplifier provides 2x300W into 4 Ohm is equipped complete with temperature-controlled fan cooling, all common protective circuits such as over-temperature, short circuit, RFI and soft start.
The integral soft clip limiter protects against damage to the connected loudspeakers, the activity of a protective circuit, signal and limiter are shown for each channel by LEDʼs.

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 300 Watt rms 
Power output stereo 8Ω:2 x 180 Watt rms 
Power output bridged 8Ω:600 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:> 105 dB 
Crosstalk:> 70 dB 
Distortion (THD+N): 
Intermodulation: 
Damping factor:200:1 (8 Ω) 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:2 x XLR balanced, 6,3mm jack unbalanced 
Input sensitivity:0 / 0.775 dBm/V RMS 
Input impedance: 10.000 kΩ 
Controls:Volume control for each channel 
OUTPUT SECTION
Output connector:2 x Neutrik Speakon 4 ways 
SYSTEM PARAMETERS
Cooling:Two-speed fan 
Protections:Temperature, DC, RFI short circuit, Soft-Start thermal on transformer 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220÷240 / 110÷120 ~ 50 / 60 V ~ Hz  
Max.current:6 A 
Power Consumption:1300 W 
PHYSICAL SPECIFICATIONS
Height:88 / 3.46 mm/inch 
Width:483 / 19.01 mm/inch 
Depth:350 / 13.77 mm/inch 
Net Weight:11.45 / 25.24 Kg/Lbs 
SHIPPING INFORMATION
Package height:120 / 4.72 mm/inch 
Package width:540 / 21.25 mm/inch 
Package depth:470 / 18.05 mm/inch 
Shipping Weight:13.81 / 30.44 Kg/Lbs

 

HPS 1500 is a 2 channel power amplifier that delivers up to 2 x 750 W RMS @ 4 Ω (1500 W RMS bridged @ 8 Ω).

XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature.

Features
Fast response and low distortion
Easy to configure in stereo / mono / bridge modes
Extensive protective circuits ensure high reliability and operating safety
Front panel signal / clip / protect LED indicators
Minimum load impedance (stereo / mono): 4 Ohm
XLR input connectors
SPEAKON output connectors
Switchable limiter
2 unit 19" rack, low weight for easy transportation

 

AMPLIFIER SPECIFICATIONS
Power output stereo 4Ω:2 x 750 Watt rms 
Power output stereo 8Ω:2 x 450 Watt rms 
Power output bridged 8Ω:1500 Watt rms 
Frequency Response:20 Hz ÷ 20 kHz  
Signal/noise rate:106 dB 
Damping factor:> 300 
Slew rate:50 V/μS 
INPUT SECTION
Input connector:xlr 
Input sensitivity:1.4 V (/ 32 – 26 dB) dBm/V RMS 
Input impedance: 20 kΩ (balanced), 10 kΩ (unbalanced) kΩ 
OUTPUT SECTION
Output connector:Speakon 
SYSTEM PARAMETERS
Cooling:Forced 
Amplifier class:H 
POWER REQUIREMENT
Operating voltage:220 ÷ 240 V (50 / 60 Hz) V ~ Hz  
PHYSICAL SPECIFICATIONS
Height:88/3.4 mm/inch 
Width:482/18.9 mm/inch 
Depth:420/16.5 mm/inch 
Net Weight:17/37.4 Kg/Lbs

 

Τελικός ενισχυτής 2U ισχύος 2 Χ 500 Watt/4Ω με απόκριση συχνότητας 20Hz - 20KHz. Βάρος 15 Kg. Διαθέτει ρύθμιση ευαισθησίας εισόδου (0,775V/1,0V/1,44V), Limiter και φίλτρα Low pass & High pass για σύνδεση με sub ή δορυφόρο. Διαθέτει εισόδους balanced XLR/JACK και εξόδους ηχείων σε Speakon & Binding post

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W  2 Ohm

The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products.

The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs.

The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design.

The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.

Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W

Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W

Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

THD
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>80 dB

Gain
35 dB

Input sensitivity
0.75 V

Protection circuits
clip limiter , DC protection , short circuit , thermal overload

Controls
2 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
level , Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
2

Speaker output connections
Speakon compatible , Terminal posts

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
12,8 kg

Features
Volex mains socket

BASIC Series - Intelligent Power

BASIC - that's meeting the tightest budgets and professional requirements
in reliability, flexibility and sound. Alone or in combination with the other
products of the Bittner portfolio.
The consequent realisation of the Bittner quality standards indicates once
more our understanding of the contracting business. It underlines our philosophy
that cost consciousness has nothing to do with giving up standards. Compromise
is a word unknown to Bittner Audio!
The incorporation of detent potentiometers, clip limiter, protection circuits for
any imaginable situation, as well as a first-class production process using only
highest-quality components made the BASIC series the choice of most contractors.

Certainly more than basic!

High Tech SMT design
Excellent sound and superior impulse response
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
XLR Inputs
Speakon and Binding Posts
Clip Limiter
Toroidal transformers
LED Indicators for SIGNAL, CLIP, PROTECT, POWER
Temperature controlled, variable speed, low noise fans
Detent potentiometers
Stereo / Bridged / Parallel Mode
Ground Lift
Robust Steel Chassis
3 Year Warranty

TECHNICAL DATA:
Basic 800:  2x 400 W @ 4 Ohm
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.03%
Signal-to-Noise Ratio: < -102 dB
Channel Seperation: > 85 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Damping Factor:  > 400 @ 4 Ohm
Cooling:  2x Fan (temp. reg. variable speed)
Weight:  13 kg.
Dimensions : 2 RU/483x89x265 mm (19" x 3.5" x 12.6“)

Weight32.00 kg13.81 kg20.00 kg15.00 kg13.00 kg13.00 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 32.00 kg
Βάρος 13.81 kg
Βάρος 20.00 kg
Βάρος 15.00 kg
Βάρος 13.00 kg
Βάρος 13.00 kg