| Content |
Rack mount τελικός ενισχυτής, ισχύς 480W / 680W max @100V/70V/25V/16ohms/8ohms/4ohms, 1x. XLR/ RCA stereo in, 1x XLR/ RCA stereo out, mic in, override in, bass, treble, δυνατότητα τροφοδοσίας από UPS 24VDC, 3U, 483x133x300mm, 25 Kg.
| Tύπος: | Τελικός Ενισχυτής | | Ισχύς: | 1 x 480W@8Ω/100V | | Απόκριση Συχνότητας: | 50 Hz - 20 kHz | | Είσοδοι: | 1 x XLR/RCA | | Έξοδοι: | Κλέμες | | Eιδικά Στοιχεία: | Eίσοδο emergency override, ρύθμιση bass, treble | | Διαστάσεις (Π x Y x B): | 483x133x300mm | | Rack Mount: | 3U | | Bάρος: | 25 kg | | Τύπος: | 100V | | Rack Mount: | 3U |
|
Crown CDi 1000 2x700W-4Ω Τελικός Ενισχυτής
Τελικός ενισχυτής 2 Χ 700W στα 4 Ω και 2 Χ 500W 70 V/ 100 V. Μέ οθόνη LCD στη πρόσοψη ειδικός ενισχυτής για 100 βολτικά συστήματα πολλαπλών και σύνθετων εγκαταστάσεων. |
Ενισχυτής Public Address 60W/100V, 2 μεγαφωνικές ζώνες, 3 mic & 3 AUX inputs (2 stereo), emergency in με προτεραιότητα η οποία ενεργοποιείται ακόμα και αν το μηχάνημα είναι σε power off, telephone in με δυνατότητα προσπέλασης στις 2 ζώνες, τόνος (chime) αναγγελίας, rec out, line out. Δυνατότητα paging σε κάθε ζώνη ή και στις 2 ταυτόχρονα σε συνδυασμό με το paging μικρόφωνο PM-660. (420W x 100H x 364D mm). Βάρος 9,4kg |
Ολοκληρωμένος ενισχυτής PA 30 WRMS, με μετασχηματιστή εξόδου 100V, με 3 mic& 2 AUX input, phantom power, high/low ρυθμιστικό EQ & priority mute στο mic 1, βάρος 5 kg. Εφαρμογές: σε εγκαταστάσεις 100V, μικρά καφέ, καταστήματα, εργοστάσια, κ.α.
| Specification |
|
|---|
| Power Source | 220 - 240V AC or 24V DC | | Rated Output | 30W | | Power Consumption | 34W (EN60065), 78W(AC operation at rated output, 2A (DC operation at rated output) | | Frequency Response | 50 - 20,000Hz (+/- 3 dB) | | Distortion | Under 1% at 1kHz,1/3 rated power | | Input | MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1) | | Output | SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:330W (100V)
LOW IMPEDANCE: 4Ω (11V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack | | Phnatom Powe | DC + 21V (MIC 1) | | S/N Ratio | Over 60dB | | Tone Control | Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz | | Muting | MIC1: Mutes other signals by 0 - 30 dB attenuation | | Indicator | Power signal, peak | | Finish | Panel: ABS resin, black/Case: Steel plate, black | | Dimensions | 420 (W) x 100.9 (H) x 280.2 (D) mm | | Weight | 5kg |
|
XB Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 400: 2x 200 W / 100 V
Class: AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans (temp. reg. variable speed)
Weight: 17 kg
Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“) |
XB Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 600: 2x 300 W / 100 V
Class: AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans (temp. reg. variable speed)
Weight: 19 kg
Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.