PROEL DB-1A DI Box

Μη Διαθέσιμο

159.00 με ΦΠΑ 24%

Εξαντλημένο

CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Μη Διαθέσιμο Μη Διαθέσιμο Κωδικός προϊόντος: H30PR00201 Κατηγορία:
Το DB1A διαθέτει ένα MU-METAL core μετασχηματιστή ικανό να μειώσει τη φασική και αρμονική παραμόρφωση στο ελάχιστο, με εμφανή βελτίωση ακόμη και με τη χρήση μεγάλου μήκους καλωδίων. Η ακεραιότητα του ήχου είναι εγγυημένη με χαμηλό θόρυβο και την ικανότητα να δεχτεί σηματα εξαιρετικά χαμηλής αντιστάσεως σήματα. Το input section έχει Jack αλλά και XLR […]

 

Διαβάστε περισσότερα

Το DB1A διαθέτει ένα MU-METAL core μετασχηματιστή ικανό να μειώσει τη φασική και αρμονική παραμόρφωση στο ελάχιστο, με εμφανή βελτίωση ακόμη και με τη χρήση μεγάλου μήκους καλωδίων. Η ακεραιότητα του ήχου είναι εγγυημένη με χαμηλό θόρυβο και την ικανότητα να δεχτεί σηματα εξαιρετικά χαμηλής αντιστάσεως σήματα. Το input section έχει Jack αλλά και XLR υποδοχές με δυνατότητα Link και PAD μέχρι και 30dB που επιτρέπει να χρησιμοποιηθούν σήματα μεγάλης εντάσεως.

 

Τεχνικά Χαρακτηριστικά

 

Τύπος

1 channel active DI

Πλάτος

215 mm(8.465inch )

Ύψος

50 mm(1.969inch )

Βάθος

125 mm(4.921inch )

Βάρος

1 kg(2.205lb )

Rack Units

1/2 rack unit.
Removing the two molded sides and attaching two units, with the supplied brackets, you can mount two by two DI boxes into a standard 19” rack.

Τροφοδοσία

Phantom Power: +24 volts DC to +48 volts DC
External AC/DC adaptor: +9 volts DC with link
Standalone/Standby: 9 volt PP3 type battery.

Current drain

Είσοδοι

Two Parallel 1/4′ jack connectors and one parallel XLR connector (unbalanced).

Αντίσταση εισόδου

1M Ohm (pad at 0 dB)
47k Ohm (pad at -10/-20 dB)
44k Ohm (pad at -30 dB)

Input Levels

+5 dBu (pad at 0 dB)
+15 dBu (pad at -10 dB)
+25 dBu (pad at -20 dB)
+35 dBu (pad at -30 dB)

Έξοδοι:

XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground

Output Levels

into 600 Ohms or greater
+3 dBu (for 0.1% THD at 50 Hz)
+5 dBu (for 0.1% THD at 1k Hz)

Συνδέσεις

XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground

Κανάλια

1 nr.

Απόκριση  συχνότητας

10 Hz to 100 kHz, +0dB/-1 dB

Distortion (THD)

S/N Ratio

Controls

On/off, Pad -10, Pad -20, Gnd Lift, Ø inv.

Notes

CMR > 60 dB
Phase distortion +14° at 20 Hz, -6° at 20k Hz

Βάρος 1.00 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “PROEL DB-1A DI Box”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

PROEL DB-1A DI Box removeDBX DB-12 ACTIVE DI BOX ME GROUND LIFT Ενεργό DI box με ground lift removePALMER PAN03 AUDIO TOOLS Active x 4ch DI box 19" Rack ενεργό removePalmer MI PDI 09 Passive DI Box for Guitars removeDOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- removeLD SYSTEMS LDI02 ΕΝΕΡΓΟ DI BOX με ΜΠΑΤΑΡΙΑ remove
NamePROEL DB-1A DI Box removeDBX DB-12 ACTIVE DI BOX ME GROUND LIFT Ενεργό DI box με ground lift removePALMER PAN03 AUDIO TOOLS Active x 4ch DI box 19" Rack ενεργό removePalmer MI PDI 09 Passive DI Box for Guitars removeDOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- removeLD SYSTEMS LDI02 ΕΝΕΡΓΟ DI BOX με ΜΠΑΤΑΡΙΑ remove
Image
SKUH30PR00201DBX DB-12PAN03PDI09275LDI02
Rating
Price 159.00 με ΦΠΑ 24% 140.00 με ΦΠΑ 24% 292.43 με ΦΠΑ 24% 100.06 με ΦΠΑ 24% 73.93 με ΦΠΑ 24% 58.64 με ΦΠΑ 24%
Stock

Εξαντλημένο

Σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Σε απόθεμα

Μόνο 5 απομένουν σε απόθεμα

AvailabilityΕξαντλημένοΣε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Διαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΣε απόθεμαΜόνο 5 απομένουν σε απόθεμα
Add to cart

Διαβάστε περισσότερα

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content

Το DB1A διαθέτει ένα MU-METAL core μετασχηματιστή ικανό να μειώσει τη φασική και αρμονική παραμόρφωση στο ελάχιστο, με εμφανή βελτίωση ακόμη και με τη χρήση μεγάλου μήκους καλωδίων. Η ακεραιότητα του ήχου είναι εγγυημένη με χαμηλό θόρυβο και την ικανότητα να δεχτεί σηματα εξαιρετικά χαμηλής αντιστάσεως σήματα. Το input section έχει Jack αλλά και XLR υποδοχές με δυνατότητα Link και PAD μέχρι και 30dB που επιτρέπει να χρησιμοποιηθούν σήματα μεγάλης εντάσεως.   Τεχνικά Χαρακτηριστικά  

Τύπος 1 channel active DI
Πλάτος 215 mm(8.465inch )
Ύψος 50 mm(1.969inch )
Βάθος 125 mm(4.921inch )
Βάρος 1 kg(2.205lb )
Rack Units 1/2 rack unit.
Removing the two molded sides and attaching two units, with the supplied brackets, you can mount two by two DI boxes into a standard 19'' rack.
Τροφοδοσία Phantom Power: +24 volts DC to +48 volts DC
External AC/DC adaptor: +9 volts DC with link
Standalone/Standby: 9 volt PP3 type battery.
Current drain
Είσοδοι Two Parallel 1/4' jack connectors and one parallel XLR connector (unbalanced).
Αντίσταση εισόδου 1M Ohm (pad at 0 dB)
47k Ohm (pad at -10/-20 dB)
44k Ohm (pad at -30 dB)
Input Levels +5 dBu (pad at 0 dB)
+15 dBu (pad at -10 dB)
+25 dBu (pad at -20 dB)
+35 dBu (pad at -30 dB)
Έξοδοι: XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground
Output Levels into 600 Ohms or greater
+3 dBu (for 0.1% THD at 50 Hz)
+5 dBu (for 0.1% THD at 1k Hz)
Συνδέσεις XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground
Κανάλια 1 nr.
Απόκριση  συχνότητας 10 Hz to 100 kHz, +0dB/-1 dB
Distortion (THD)
S/N Ratio
Controls On/off, Pad -10, Pad -20, Gnd Lift, Ø inv.
Notes CMR > 60 dB
Phase distortion +14° at 20 Hz, -6° at 20k Hz



Ενεργό DI box με ground lift, αναστροφή φάσης, έξοδους XLR και καρφί 1/4'' (thru), pad 3 θέσεων στην είσοδο για σήματα επιπέδου instrument/line/speaker

  • Premium Performance
  • Rugged Design
  • Stackable Chassis with Durable Rubber Foot
  • Gold-plated Neutrik® XLR Connector
  • Premium Chrome Toggle Switches
  • Hi-Z 1/4" Input Jack
  • Parallel 1/4" Thru Jack
  • Transformer Isolated
  • Premium Shielded Custom dbx Transformer
  • Balanced XLR Lo-Z Output
  • 3-Way 0/20/40 dB Pad Switch
  • Flat/High-Cut Filter Switch
  • Output Polarity Invert Switch
  • Ground Lift Switch
  • 4 Year Warranty!
Additional dB12 Features
  • Phantom Powered
  • Green LED Phantom Power Indicator
  • +48V Phantom Operation
  • Low-Noise Active Circuitr

dB12 Specifications INPUT SECTION

Input: 1 instrument/line/speaker level

Connector: 1/4" jack

Type: Unbalanced, RF filtered

Impedance: 150k Ohm typical

Max Input Level: +20dBu (0dB pad)
+40dBu (20dB pad)
+60dBu (40dB pad)

OUTPUT SECTION

Thru Output: 1 parallel connection from input jack

Connector: 1/4" jack

Type: Unbalanced, RF filtered

 

Main Output: 1 line level

Connector: XLR male jack

Type: Balanced

Impedance: 150 Ohm typical

Max Output Level: 0dBu

PERFORMANCE

Transformer: Custom dbx mu-metal-shielded

Frequency Response: 20Hz to 20kHz, +/-2.5dB

Noise:

Palmer PAN 03
19" DI Box 4-Channel active

Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back.

Product type DI Boxes
Type active
Channels 4
Inputs 4
Input connectors 6.3 mm jack
Max. input level + 45 dBu
Input impedance (@ 60 Hz) 1 M Ohm(s)
Input pad 0 / -30 dB
Outputs 4 (+ 4 parallel XLR outs)
THRU outputs/channel 1
Output connectors 6.3 mm jack , XLR
Max. output level + 10 dBu
Output impedance 600 Ohm(s)
Frequency response 10 - 20000 Hz
Transformer balanced Yes
Ratio 10 : 1
Indicators Power
Controls attenuator , ground lift
Operating voltage external
Cabinet material sheet steel
Cabinet surface Powder coated
Width 480 mm
Width 19 "
Depth 90 mm
Height 45 mm
Height 1 U
Weight 1,6 kg

Passive DI box especially designed for guitars.

The PDI09 can be connected between an effect device or amplifier and the mixing console. The PDI09 is not suitable for direct connection to a guitar. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be varied between "Mellow“, "Normal“, or "Bright“.

Technical specifications:

  • Input: 6.3 mm jack with parallel "THRU" socket
  • Output: male XLR transformer balanced
  • Attenuator: (Level switch) 0 dB for line signals, -15 dB for small amps up to 10 w, 30 dB for large amps up to 200 w
  • No battery necessary
DOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand-

The AC 275 is an active, phantom powered direct box. Unlike a passive DI where the frequency response of the signal can be altered depending on the connected impedance, an active DI buffers the input signal with an amplifier. This assures that the sound source will reach the mixer balanced and noise-free.

Housed in a cast alloy chassis, the AC 275 supplies two, high impedance, unbalanced 1/4" jacks and one low impedance balanced XLR jack. It operates with battery or phantom power.


Key Features
?

Active direct box

?

Allows a hi impedance unbalanced source to directly feed a low impedance balanced input

?

Flat frequency response

?

Connects guitar pickups, microphones or electric instruments to a recording or P.A. console without audio quality loss

?

Internal pad for speaker level input

?

Operates with battery or phantom power

?

Ground lift switch eliminates typical ground loop problems

?

Rugged, road-proof cast alloy chassis

pdf User´s Manual

LD Systems LDI02
DI Box active

Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated),

extremely low battery consumption. Battery: 9 V block (not included).

 

Product type DI Boxes
Channels 1
Inputs 2
Input connectors 6.3 mm Jack , XLR
Max. input level + 10 / + 30 dBu dBu
Input impedance 1 M Ohm(s)
Outputs 1
THRU outputs/channel 1
Output connectors XLR
Frequency response 20 - 20.000 Hz
THD
Indicators Power
Controls ground lift , Power
Operating voltage +48 V phantom power , 9 V block
Cabinet material metal
Cabinet surface painted
Width 135 mm
Depth 128 mm
Height 53 mm
Weight 0,645 kg
Weight1.00 kg1.00 kg1.90 kg0.29 kg2.50 kg0.70 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 1.00 kg
Βάρος 1.00 kg
Βάρος 1.90 kg
Βάρος 0.29 kg
Βάρος 2.50 kg
Βάρος 0.70 kg