| Content |
Woofer 12”, ισχύος 350W / 8Ω, ιδανικό για ενισχυτές κιθάρας. Ευαισθησία 97dB, απόκριση συχνότητας 43 -2.800 Hz, διάμετρος πηνίου 3”.
| Rated Power Handling: 350 Watts Program Power: 700 Watts Sensitivity 2.83V @ 1M: 97 dB Frequency Range @ -10Db: 43-2,800 Hz Resonance Frequency (Fs): 48.54 Hz Xmax: 5.5 mm Voice Coil Diameter: 3" Nominal Impedance: 8 Magnet Material: Ferrite Frame Material: Stamped Steel Weight: 9.12 Lbs Mounting Depth: 4.92” (125 mm) Replacement Cone Kit: N/A MSRP: $93.78 |
|
|---|
|
|
|---|
|
|
|---|
|
|
|---|
|
|
|---|
|
|
|---|
| BETA- 12A Series Standard American
Recommended for professional audio and bass guitar applications as a woofer in a vented enclosure. Also
works well for PA in a sealed or bandpass enclosure.
SPECIFICATION
- Nominal Basket Diameter 12", 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 250 W / Music Program 500 W
- Resonance 47 Hz
- Usable Frequency Range 43 Hz - 3.8 kHz
- Sensitivity 98
- Magnet Weight 38 oz.
- Gap Height 0.312", 7.92 mm
- Voice Coil Diameter 2", 50.8 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 47 Hz
- DC Resistance (Re) 5.0
- Coil Inductance (Le) 0.64 mH
- Mechanical Q (Qms) 6.00
- Electromagnetic Q (Qes) 0.50
- Total Q (Qts) 0.46
- Compliance Equivalent Volume (Vas) 120.1 liters / 4.2 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 237 cc
- Mechanical Compliance of Suspension (Cms) 0.29 mm/N
- BL Product (BL) 10.8 T-M
- Diaphragm Mass inc. Airload (Mms) 40 grams
- Efficiency Bandwidth Product (EBP) 94
- Maximum Linear Excursion (Xmax) 4.4 mm
- Surface Area of Cone (Sd) 538.9 cm²
- Maximum Mechanical Limit (Xlim) 11 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed 25.5-35.4 liters, 0.9-1.25 cu.ft.
Vented 36.8-139 liters/1.3-4.9 cu.ft.
- Overall Diameter 12.03", 305.5 mm
- Baffle Hole Diameter 10.95", 278.1 mm
- Front Sealing Gasket standard fitted as standard
- Rear Sealing Gasket standard fitted as standard
- Mounting Holes Diameter 0.25", 6.4 mm
- Mounting Holes B.C.D. 11.59", 294.3 mm
- Depth 4.57", 116 mm
MATERIALS of Construction
- Copper voice coil
- Polyimide former
- Ferrite magnet
- Vented and extended core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
DELTA-12LFA American Standard Series
Recommended for professional audio mid-bass or floor monitor applications in a sealed enclosure. Also suitable
Mas a woofer in vented, bass guitar or PA enclosures.
SPECIFICATION - Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 500 W / Music Program 1000 W
- Resonance 51 Hz
- Usable Frequency Range 44 Hz - 3 kHz
- Sensitivity 94.6
- Magnet Weight 56 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters - Resonant Frequency (fs) 51 Hz
- DC Resistance (Re) 6.06
- Coil Inductance (Le) 1.45 mH
- Mechanical Q (Qms) 7.28
- Electromagnetic Q (Qes) 0.51
- Total Q (Qts) 0.47
- Compliance Equivalent Volume 67.9 liters (Vas) 67.9 liters / 2.4 cu. ft.
- Peak Diaphragm Displacement Volume 243 cc
- Mechanical Compliance of Suspension 0.19 mm/N
- BL Product (BL) 14.1 T-M
- Diaphragm Mass inc. Airload (Mms) 51 grams
- Efficiency Bandwidth Product (EBP) 100
- Maximum Linear Excursion (Xmax) 4.8 mm
- Surface Area of Cone (Sd) 506.7 cm²
- Maximum Mechanical Limit (Xlim) 13.5 mm
MOUNTING Information - Recommended Enclosure Volume
Sealed 19.8-28 liters/0.7-1.0 cu.ft.
Vented 25.5-102 liters/0.9-3.6 cu.ft. - Overall Diameter 12.03“, 305.5 mm
- Baffle Hole Diameter 10.95“, 278.1 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 11.59“, 294.3 mm
- Depth 5.35“, 136 mm
MATERIALS of Construction - Copper voice coil
- Polyimide former
- Ferrite magnet
- Vented and extended core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.
General specifications | Nominal diameter (mm/in) | 305/12 | | Power Rating (AES, W rms) | 250 | | Nominal impedance (Ω) | 8 | | Voice coil diameter (mm/in) | 63.5/2.5 | | Magnet type | Ceramic | | Magnet weight (kg/oz) | 1.2/42 | | Chassis type | Pressed steel | | Sensitivity (dB) | 97 | | Frequency range (Hz) | 40-4000 | | Coil material | Round copper | | Former material | Polyimide | | Cone material | Kevlar loaded paper | | Surround material | Cloth-sealed | | Suspension | Single | | Xmax (mm/in) | 2.4/0.09 | | Gap depth (mm/in) | 8.0/0.31 | | Voice coil winding width (mm/in) | 12.7/0.50 | Small Signal Parameters | D (m/in) | 0.26/10.24 | | Fs (Hz) | 63 | | Mmd (g/oz) | 39.60/1.40 | | Mair | | | Qms | 6.70 | | Qes | 0.54 | | Qts | 0.50 | | Re (Ω) | 5.13 | | Vas (lt/ft3) | 54.5/1.92 | | BI (Tm) | 13.20 | | Cms (mm/N) | 0.14 | | Rms (kg/s) | 2.76 | | Le (mH) | | Mounting Information | Overall diameter (mm/in) | 309/12.17 | | Overall depth (mm/in) | 130/5.12 | | Cut-out diameter (mm/in) | 283/11.14 | | Mounting slot dimensions (mm/in) | Ø 7.9/0.31 | | Number of mounting slots | 4 | | Mounting slot PCD range (mm/in) | 297/11.69 | | Unit weight (kg/lb) | 4.1/9.0 | Packed Dimensions and Weight | Single pack size W x D x H (mm/in) | 330 x 330 x 150/13.0 x 13.0 x 5.9 | | Single pack weight (kg/lb) | 3/6.6 | | Multipack (60) size W x D x H (mm/in) | 1080 x 980 x 880/42.5 x 38.6 x 34.6 | | Multipack (60) weight (kg/lb) | 190/419 |
|
Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.
With its fast attack and tightly controlled low-end, the G12-65 became a firm favourite in the ʼ80s with hard rock players. The precisely tuned midrange and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.
| General specifications |
|---|
| Nominal diameter | 12“, 305mm | | Power Rating | 65W | | Nominal impedance | 8Ω and 15Ω | | Sensitivity | 97dB | | Chassis type | Pressed steel | | Voice coil diameter | 1.75“, 44.5mm | | Voice coil material | Rounded copper | | Magnet type | Ceramic | | Magnet weight | 35oz, 0.99kg | | Frequency range | 80-5000Hz | | Resonance frequency, Fs | 85Hz | | DC resistance, Re | 6.9Ω & 11.8Ω |
| Mounting Information | | Diameter | 12.2“, 309mm | | Overall depth | 5.0“, 128mm | | Magnet structure diameter | 5.7“, 145mm | | Cut-out diameter | 11.1“, 283mm | | Mounting slot dimensions | 0.31“, 7.9mm Ø | | Number of mounting slots | 4 | | Mounting slot PCD | 11.7“, 297mm | | Unit weight | 12.1lb, 5.5kg |
|
BETA-12CX American Standard Series
Recommended for professional audio as a mid-bass in either vented, or sealed satellite or floor monitor
enclosures. Also works nicely in vented two-way enclosures used for small coverage areas.
SPECIFICATION - Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 250 W / Music Program 500 W
- Resonance 43 Hz
- Usable Frequency Range 66 Hz - 20 kHz
- Sensitivity 96.7
- Magnet Weight 38 oz.
- Gap Height 0.312“, 7.92 mm
- Voice Coil Diameter 2“, 50.8 mm
THIELE & Small Parameters - Resonant Frequency (fs) 43 Hz
- DC Resistance (Re) 5.57
- Coil Inductance (Le) 1.01 mH
- Mechanical Q (Qms) 6.69
- Electromagnetic Q (Qes) 0.51
- Total Q (Qts) 0.48
- Compliance Equivalent Volume (Vas) 161 liters / 5.7 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 186 cc
- Mechanical Compliance of Suspension (Cms) 0.40 mm/N
- BL Product (BL) 10.0 T-M
- Diaphragm Mass inc. Airload (Mms) 34 grams
- Efficiency Bandwidth Product (EBP) 84
- Maximum Linear Excursion (Xmax) 3.5 mm
- Surface Area of Cone (Sd) 532.4 cm²
- Maximum Mechanical Limit (Xlim) 10.4 mm
MOUNTING Information - Recommended Enclosure Volume
Sealed 42.5-28 liters/1-1.5 cu.ft.
Vented 37-71 liters/1.3-2.5 cu.ft. - Overall Diameter 12.03“, 305.5 mm
- Baffle Hole Diameter 10.95“, 278.1 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 11.59“, 294.3 mm
- Depth 4.47“, 114 mm
MATERIALS of Construction - Copper voice coil
- Polyimide former
- Ferrite magnet
- Extended core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Screened cloth dust cap
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.