Stock | Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
|
Content | Μέγεθος woofer: 6,5"Μέγεθος tweeter: 1"Ισχύς: 30 Watt RMSIσχύς στα 70V: 30, 15, 7.5, 3.7, 1.9 WattIσχύς στα 100V: 30, 15, 7.5, 3.7 Watt8Ω bypassΣυχνοτικό εύρος: 60 Hz - 20 kHzΕυαισθησία: 86 dB SPLΓωνία κάλυψης (-6 dB): 130° (500 Hz - 5 kHz)Maximum continuous SPL: 101 dBMaximum peak SPL: 107 dBΑντίσταση: 8 ΩΣύνδεση: Euroblock connectorΔιαστάσεις: 303 x 215 x 197 mmΒάρος: 3,8 kg
The White AcousticCoverage Series QSC AC-S6T is a pair of transformer-equipped 6.5″ surface-mount loudspeakers voiced to deliver enhanced clarity in the vocal range, making them suitable for 70/100V or 8-ohm operation in a variety of paging, A/V conferencing, and background music applications.
Outfitted with a 6.5″ polypropylene woofer and a 1″ aluminum dome tweeter in a UV-treated ABS enclosure with a ported baffle, the AC-S6T offers broad 130° conical coverage while providing a frequency range of 60 Hz to 20 kHz (-10 dB). The speaker is capable of handling 30W RMS and producing a peak maximum SPL of 107 dB.
The AC-S6T utilizes a 4-pole Euroblock connector on the rear panel for easy input and loop-thru wiring. A yoke bracket is included for simplified surface-mount installation.
High-quality transducers provide increased clarity through the critical voice range and improved musicality often not seen in typical BGM-class products
6.5″ polypropylene cone transducer with butyl rubber surround and 1″ aluminum dome tweeter
130° of conical coverage reduces the number of loudspeakers required for even coverage in close proximity
UV-treated, high-impact ABS enclosure and ported baffle assembly
Tuned for added musicality and low-frequency extension down to 60 Hz (-10 dB)
Low-saturation, low-loss 70/100V transformer with 8-ohm bypass and rear-panel tap selector
4-pole Euroblock connector with loop-thru wiring located the rear of the enclosure
Advanced voicing filter sets using QSC Intrinsic Correction are available through either Q-Sys processing or CXD amplifier platforms (available separately)
Active or Passive |
Passive |
Number of Included Speakers |
2 |
Speaker Configuration |
2-Way |
Power Handling |
For 2 Hours:
30 W RMS |
Recommended Amplifier Power |
60 W |
Constant Voltage / Transformer Taps |
70 V:
30 / 15 / 7.5 / 3.7 / 1.9 W or 8 Ohms Bypass
100 V:
30 / 15 / 7.5 / 3.8 W or 8 Ohms Bypass |
Impedance |
8 Ohms (Transformer Bypassed) |
Transformer Wattage |
30 W |
Enclosure Type |
Bass-Reflex |
Shielded |
No |
Drivers
HF Driver |
1 x 1″ / 2.54 cm Aluminum Dome Tweeter |
HF Voice Coil |
1″ / 2.54 cm |
LF Driver |
1 x 6.5″ / 16.51 cm Polypropylene Woofer |
LF Voice Coil |
1″ / 2.54 cm |
Performance
Frequency Range |
60 Hz to 20 kHz -10 dB |
Maximum SPL |
101 dB (Continuous)
107 dB (Peak) |
Sensitivity |
86 dB SPL |
Coverage Angle |
130° (Conical) |
Directivity |
6 (Directivity/Q Factor)
8 dB (Directivity Index) |
Maximum Input Voltage |
15.5 V RMS |
Connectivity
I/O Connectors |
1 x Euroblock 4-Pole Speaker Input/Thru (Removable) |
Maximum Wire Gauge |
18 AWG |
Environmental
Water / Weather Resistance |
Water Resistant |
IP Rating |
IP44 |
Operating Temperature |
-4 to 122°F / -20 to 50°C |
Physical
Color |
White |
Mounting |
1 x Bracket Point (Each Side) |
Construction Material |
ABS, Metal Grille |
Dimensions |
11.9 x 8.5 x 7.8″ / 30.23 x 21.59 x 19.81 cm |
Weight |
8.3 lb / 3.8 kg (Each Speaker) |
|
- 80 W RMS power handling
- 115 dB max SPL
- 70 ÷ 20000 Hz frequency range
- 120° x 80° constant directivity coverage angle
- 1 x 5" high power woofer
- 1 x 1" voice coil neodymium dome tweeter
- High quality plywood cabinet
- Steel front grille with clothing
- Installation points available on rear, top and bottom panels
- 4 pole EUROBLOCK connector (audio input and parallel link output)
Το COMPACT M 06 είναι ένα ξύλινο ηχείο 2 δρόμων κατάλληλο για σταθερές εγκαταστάσεις. Ο ισορροπημένος ήχος του, το μικρό μέγεθός του και η στιβαρή κατασκευή του, είναι λίγα από τα πλεονεκτήματά του! Το M 06 διαθέτει υψηλή ευαισθησία, χάρη στη χρήση μεγάλων μαγνητών και ποιότητα ήχου HI-FI, με ομαλή και ευρεία απόκριση συχνότητας. Yψηλό επίπεδο SPL σε σχέση με το μέγεθός του. Ο κομψός και συμπαγής σχεδιασμός με υψηλής ποιότητας φινίρισμα, καθιστά το M 06 κατάλληλο για σχεδόν οποιοδήποτε περιβάλλον, ακόμη και με αρχιτεκτονικούς περιορισμούς. Τα προαιρετικά εξαρτήματα στερέωσης επιτρέπουν τη χρήση του M 06 σε εγκαταστάσεις τοίχου ή οροφής.
|
- 80 W RMS power handling
- 115 dB max SPL
- 70 ÷ 20000 Hz frequency range
- 120° x 80° constant directivity coverage angle
- 1 x 5" high power woofer
- 1 x 1" voice coil neodymium dome tweeter
- High quality plywood cabinet
- Steel front grille with clothing
- Installation points available on rear, top and bottom panels
- 4 pole EUROBLOCK connector (audio input and parallel link output)
Το COMPACT M 05 είναι ένα ξύλινο ηχείο 2 δρόμων κατάλληλο για σταθερές εγκαταστάσεις. Ο ισορροπημένος ήχος του, το μικρό μέγεθός του και η στιβαρή κατασκευή του, είναι λίγα από τα πλεονεκτήματά του! Το M 05 διαθέτει υψηλή ευαισθησία, χάρη στη χρήση μεγάλων μαγνητών και ποιότητα ήχου HI-FI, με ομαλή και ευρεία απόκριση συχνότητας. Yψηλό επίπεδο SPL σε σχέση με το μέγεθός του. Ο κομψός και συμπαγής σχεδιασμός με υψηλής ποιότητας φινίρισμα, καθιστά το M 05 κατάλληλο για σχεδόν οποιοδήποτε περιβάλλον, ακόμη και με αρχιτεκτονικούς περιορισμούς. Τα προαιρετικά εξαρτήματα στερέωσης επιτρέπουν τη χρήση του M 05 σε εγκαταστάσεις τοίχου ή οροφής.
|
- 300 W RMS power handling
- 128 dB max SPL
- 60 ÷ 20000 Hz frequency range
- 90° x 70° constant directivity coverage angle
- 1 x 10" high power woofer
- 1 x 1.4" voice coil compression driver
- High quality plywood cabinet
- Steel front grille with clothing
- Installation points available on rear, top and bottom panels
- 4 pole EUROBLOCK connector (audio input and parallel link output)
- Dimensions: 510mm X 295mm X 325mm
Το COMPACT M 08 είναι ένα ξύλινο ηχείο 2 δρόμων κατάλληλο για σταθερές εγκαταστάσεις. Το M 08 διαθέτει υψηλή ευαισθησία, χάρη στη χρήση μεγάλων μαγνητών και ποιότητα ήχου HI-FI, με ομαλή και ευρεία απόκριση συχνότητας. Yψηλό επίπεδο SPL σε σχέση με το μέγεθός του. Ο κομψός και συμπαγής σχεδιασμός με υψηλής ποιότητας φινίρισμα, καθιστά το M 08 κατάλληλο για σχεδόν οποιοδήποτε περιβάλλον, ακόμη και με αρχιτεκτονικούς περιορισμούς. Τα προαιρετικά εξαρτήματα στερέωσης επιτρέπουν τη χρήση του M 08 σε εγκαταστάσεις τοίχου ή οροφής.
|
Configuration |
Passive 2-Way |
Enclosure Type |
Bass-Reflex Loudspeaker |
Total Power Capacity |
40 W RMS
160 W Peak |
Constant Voltage / Transformer Taps |
None |
System Impedance |
8 Ohms |
Drivers
HF Driver |
1" / 25.4 mm Tweeter |
HF Voice Coil |
0.8" / 20.3 mm |
MF Driver |
None |
LF Driver |
4" / 101.6 mm Woofer |
LF Voice Coil |
1" / 25.4 mm |
Magnet |
Neodymium |
Performance
Frequency Response |
70 Hz to 20 kHz -10 dB |
Maximum SPL |
108 dB |
Coverage Angle |
110° H x 100° V |
Directivity |
7 (Directivity Index) |
Speaker Sensitivity |
86 dB |
Protections |
Overcurrent, Ultrasonic |
Connectivity
Audio I/O |
2 x Euroblock Speaker Input/Output |
Signal Processing
Crossover |
3 kHz |
Phase Adjustment |
None |
Physical
Mounting |
4 x M6 Bracket Point |
Handles |
None |
Construction Material |
Metal, Plastic |
Dimensions |
8.5 x 6.1 x 5.3" / 216 x 154 x 135 mm |
Weight |
2.2 kg |
| For acoustically challenging interiors where music and speech must be clearly understood, even in the rearmost rows, there is one solution - MAUI® i1.
This feature is achieved with nine 3" mid-range drivers, two 1" neodymium high-frequency drivers and a specially developed BEM-optimized Waveguide. This combination avoids unnecessary reflections on the floor and on ceilings by keeping the vertical dispersion as narrow as possible and the horizontal one as wide as possible.
Installers can easily integrate the MAUI® i1 in any constant-voltage audio system. This is made possible with an 8 Ohm / 70 V / 100 V selector switch. In addition, you can tap the power down to 60 W, 30 W, 15 W and 7.5 W depending on how many speakers you need to run in parallel and for a more efficient performance. At 8 Ohms, you can benefit from the best frequency response and highest 120 W RMS power rating.
For outdoor use, MAUI® i1 features weather treated cones, an aluminum loudspeaker grille and a weatherproof cover for the connection panel. That way, no water can enter the panel and your Loudspeaker stays rust free.
Surface installation is easy with the included U-bracket and with its black or white color selection, the loudspeaker blends unobtrusively and discreetly into almost any location.
The multiple award-winning MAUI® series has been expanded with the completely revised i1 and adapted to the special requirements of indoor and outdoor installations. All of this definitely makes MAUI® i1 the right choice for your demanding fixed installations.
Product type
Installation Loudspeakers
Type
Passive
Low/mid driver dimensions
9 x 3 "
Woofer size
76.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Horn
BEM optimized CD Horn
HF driver dimensions
2 x 1 "
HF Driver Size
25.4 mm
HF driver magnet
Neodymium
HF driver brand
Custom-made
Dispersion (H x V)
120° x 30
Load rating (RMS)
120 W
Peak power
480 W
Frequency response
130 - 19000 Hz
Crossover frequency
2500 Hz
SPL (1W/1m)
94 dB
Max. SPL
116 dB
Impedance
8 Ohm(s)
Input selector switch
70 V - 100V - 8 Ohms (transformer bypass)
100V Transformer power taps
60 - 30 - 15 - 7.5 W
70V Transformer power taps
60 - 30 - 15 - 7.5 W
Protection class IP
65
Loudspeaker inputs
1
Speaker input connections
4-pin Euro Terminal Block (Pitch - 5,08 mm)
Cabinet material
Aluminum
Cabinet construction
Closed
Width
85 mm
Height
985 mm
Depth
105 mm
Accessories (included)
U-Bracket for surface mount
Optional Accessories
Bracket for tilt installation applications
Weight
8,6 kg
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.