QSC RMX850a Επαγγελματικός ενισχυτής με clip limiters QSC 2x200W RMS @ 8Ω

Επαγγελματικός ενισχυτής με clip limiters QSC 2x200W RMS @ 8Ω, 2x300W RMS @ 4Ω, 2x430W RMS @2Ω, bridged 830W RMS @ 4Ω. Διαθέτει εισόδους 3-pin Euro-style detachable terminal block και XLR (pin 2+), touch-proof binding posts και Neutrik® Speakon®. Επίσης διαθέτει πάνελ ρυθμίσεων με dip switches 10 θέσεων. Προστασίες short circuit, open circuit, υπερθέρμανσης, ultrasonic, RF, σταθερή απόδοση ανεξαρτήτως φορτίου και turn on/off muting. Διαστάσεις: 89 x 483 x 404 mm, Βάρος 15,9kg.

Χαρακτηριστικά:

• Ισχύς (Stereo Mode):
      2x200W @ 8Ohm (FTC 20Hz- 20kHz, 0,1%THD)
      2x280W @ 8Ohm (EIA 1kHz, 0,1%THD)
      2x300W @ 4Ohm (FTC 20Hz- 20kHz, 0,1%THD)
      2x430W @ 2Ohm (EIA 1kHz, 0,1%THD)

• Ισχύς (Bridge Mode):
      600W @ 8Ohm (FTC 20Hz- 20kHz, 0,1%THD)
      830W @ 8Ohm (EIA 1kHz, 0,1%THD)
     

Signal to Noise, 20Hz-20kHz, 8Ohms: >-100dB
Ευαισθησία εισόδου @ 8Ohms: 1,15V (+3,4 dBu)
Voltage Gain @8Ohms: 31,6x (30dB)
Output Circuitry: Class AB
Ενσωματωμένα clip limiters
Απαιτήσεις ισχύος (230V)

• 1/8 power pink noise at 4 ohms: 6,6 A

Παραμόρφωση (SMPTE-IM):

The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W  2 Ohm

Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

The model L 500 is a 2 x 250 Watts Power Amplifier. Linear Precision Series
power amps combine excellent audio performance, modern and innovative
circuit design, meticulous and exceptionally rigid construction, and the highest
levels of operational integrity and reliability with an appropriate and more than
realistic price. The robust steel chassis provides outstanding torsional strength
through L-shaped side panels reaching under the thick aluminium front panel.
Thermal breakers prevent the power supply units from being damaged by thermal
overload. Electronically controlled fans provide sufficient front-to-rear airflow and
a special cool air diverter takes care of thermal stability. The fans? noise-level is
extremely low which provides the possibility for studio use. If necessary, a supplied
air-filter can be mounted behind the front panel ventilation louvres.
 
Features
* Excellent audio performance
* Symmetrical topology
* Ultra-low distortion
* Generously dimensioned power supply units
* Suitable to be operated on loads down to 2 ohms
* Suitable to drive complex loads with phase angles of ± 90 degree
* Extensive protection circuitry
* Unique Back-EMF protection
* Switchable limiters
* Switchable Hi/Lo-Cut filters
* Robust steel chassis
* Exceptional low noise front-to-rear air-flow
* XLR-type inputs and direct-outs
* LED display shows On, In, Out, Limit and Protect
* Highly reliable operation

Specs
* Max. Output Power - into 8 ohms : 2 x 180 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms : 2 x 280 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 2 ohms : 2 x 320 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 8 ohms bridged : 1 x 560 W at 1 kHz / THD = 1.0%
* Max. Output Power - into 4 ohms bridged : 1 x 640 W at 1 kHz / THD = 1.0%
* Rated Output Power - into 8 ohms : 2 x 175 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms : 2 x 250 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 2 ohms : 2 x 300 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 8 ohms bridged : 1 x 500 W at 20 Hz - 20 kHz / THD = 0.1 %
* Rated Output Power - into 4 ohms bridged : 1 x 600 W at 20 Hz - 20 kHz / THD = 0.1 %
* Frequency Response : 0 dB ..... -1 dB/20 Hz - 20 kHz
* Phase Angle Response : ± 30 degree/20 Hz.....20 kHz
* Maximum Output Level : 45 V / RMS before clipping, no load, ref. 1 kHz / THD = 1%
* Voltage Gain ref. 1 kHz : 26 dB (constant gain option)
* Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz
* Maximum Input Level : +21 dBu / 8.7 V
* Input Impedance active balanced : 20 kohms
* THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz
* IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output
* Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms,
   A-weighted, RMS, input sensitivity +6 dBu
* Attenuation at rated output : > 70 dB f = 1 kHz
* Damping Factor internal 1 kHz : > 300
* DIM 30 : < 0.01 %
* DIM 100 : < 0.01 %
* Slew Rate internal : > 25 V / ?s
* Power Consumption : 300 W 1/8 rated output into 4 ohms
* Width : 483 mm
* Height : 88.1 mm
* Depth : 426 mm
* Weight : 14 kg
 

Τελικός ενισχυτής 2X150W/4Ω, 2X100W/8Ω, bridged 300W/8Ω (Mono), είσοδοι XLR και 1/4 balanced με clip limiter, έξοδοι speakon, απόκριση συχνότητας 20Hz-50 kHz, S/N 100dB, 2U. Κατάλληλος για εγκαταστάσεις & P.A. 8,4kg.
 
2X150W/4Ω, 2X100W/8Ω, bridged 300W/8Ω (Mono). Βάρος 8,4kg

Reference Quality Power Amplifier [R-300 Plus]

• Controls :
  Front : Power on/off switch, attenuator, LED indicator
  Rear : Mode seletor switch, Stereo/bridged mono switch
• Connectors :
  Input : 1 XLR, 1/4" balanced per channel
  Output : 5-way binding post and SpeakonTM per channel
• Indicators :
  Power : Green, Protection : Red, Clip : Red, Signal : Green
• Power Source : 100-120VAC or 220-240VAC; 50/60Hz
  (supplied AC mains transformer depends on country requirements)
• Power Consumption : 250W(2.4A)
• Weight : 8.4kg/18.5lb
• Dimensions (WxHxD) : 482x88x317mm/19x3.5x12.5in