Content |
reamping για re-recording signals. Ιδανικό για φωνητικά, κιθάρα, μπάσο και κρουστά. Διαθέτει XLR input, 6,3mm jack.Output Level control
Re-amp your tracks with Radial!
The Radial ProRMP is a passive box that allows for re-amping of the signal. Re-amping has been the 'secret weapon' for countless recordings by the biggest names in the business and the process is often used on guitars, bass, keyboards, percussion and even voice to create new textures! The ProRMP is a 100% passive re-amplifier that lets you to take a pre-recorded track and re-amplify it through a guitar amp or effects pedals to create new and exciting tones. Dive into the creative possibilities of re-amping with the ProRMP.
Radial ProRMP at a Glance:
- Easy to use
- Custom-wound transformer
- Built tough
- In use
Easy to use Plug and play easy to use, the ProRMP connects from the recorder to your amp and effects units and does all the impedance matching for you. Just adjust the level to suit!
Custom-wound transformer The magic behind the ProRMP's great tone is a custom wound transformer that at once converts the balanced low-z source to a hi-z input for your amp while also acting as an electrical isolator to eliminate troublesome ground loops that can often cause buzz and hum in the sound.
Built tough Like all Radial products, the ProRMP is built tough! Encased in a 14-gauge steel, the ProRMP employs a unique book-end design with a welded I-beam frame that protects it from damage and assures the PC board and solder points will not be stressed, adding durability. A full-bottom no-slip pad works double duty by providing plenty of stay put while also eliminating electrical contact points from guitar amp chassis bolts that could cause ground loops.
In use Plug a standard balanced cable from your recorder or mixer output to the ProRMP's XLR input. Connect the 1/4" ProRMP output to your instrument amp. Adjust the ProRMP's output level control as required to match the amp input and engage the ground lift switch to eliminate any hum and buzz caused by ground loops.
Applications
- Electric guitars
- Bass guitars
- Keyboards
- Electric violin
- Voice
- Percussion
Radial ProRMP Features:
- Play prerecorded tracks through amps and pedals
- Opens the door to creative new tones and textures
- Eliminates repetitive playing during recording
- On board level control for fine tuning the gain
- Transformer isolated to eliminate buzz and hum
- Built from 14-gauge steel
- No-slip bottom
- 100% passive
Specifications | |
Audio circuit type: |
Passive, transformer isolated |
Frequency response: |
20Hz ~ 20KHz (+0/-1dB) |
Dynamic range: |
>137dB |
Gain: |
>-10dB |
Total harmonic distortion: |
0.003% |
Phase Deviation: |
0.3° @ 100Hz; 5° @ 20Hz |
Input Impedance: |
600 Ohms |
Output Impedance: |
600 Ohms, balanced |
Common Mode Rejection Ratio: |
100dB @ 60Hz (unbalanced source) |
Equivalent Input Noise: |
>-98dBu Noise plus gain |
Noise: |
-111dBu |
Maximum Input: |
>+26dBu |
Features |
Input pad, 180° polarity reverse, Ground lift |
Input Connectors: |
XLR |
Output Connectors: |
1/4“ |
General |
Construction: |
14 gauge steel chassis and outer shell |
Size (L x W x D): |
3.3" x 5.0" x 2" (84 x 127 x 48mm) |
Weight: |
1.55 lbs (720 g) |
Power: |
Passive, no power required |
Conditions: |
For use in dry locations only between 5°C and 40°C |
|
DOD AC 275 Active Direct Box with Switchable Ground Lift and Attenuator-2nd Hand- The AC 275 is an active, phantom powered direct box. Unlike a passive DI where the frequency response of the signal can be altered depending on the connected impedance, an active DI buffers the input signal with an amplifier. This assures that the sound source will reach the mixer balanced and noise-free. Housed in a cast alloy chassis, the AC 275 supplies two, high impedance, unbalanced 1/4" jacks and one low impedance balanced XLR jack. It operates with battery or phantom power.
| |
Behringer DI-400P High-Performance Passive Direct Injection Box Introducing the Ultra-Compact DI-Boxes from BEHRINGER There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal. The DI400P lets you connect instruments or amplifier outputs. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies. This is the sort of medicine that?ll cure headaches in your studio or on stage.
| Behringer DI-600P High-Performance Passive Direct Injection Box
Introducing the Ultra-Compact DI-Boxes from BEHRINGER There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that?ll corrupt the signal. The DI600P lets you connect instruments or amplifier outputs of up to 3,000 Watts. It converts any unbalanced signal to a balanced signal and eliminates unwanted noise. With its high-performance transformer, it also allows you to use very long cables without the loss of high frequencies. This is the sort of medicine that?ll cure headaches in your studio or on stage.
It often happens that you want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. The direct connection between audio equipment can quickly turn out to be a real challenge: technical problems crop up that can affect the signal.
Hook Your Guitar or Amp Up to the PA
Be ready for your next gig with the Behringer Ultra-DI DI600P direct box. Designed to send instrument or amplifier signals to the main mixing board, the DI600P is a high-performance passive DI is a useful tool in any gig rig or studio. Dual 1/4" TS jacks are wired in parallel let you plug your instrument into one and use the other as an output to your amp. The balanced XLR mic-level output feeds your mixer a clean and super-flat signal that is true to the source. Sweetwater knows that grounding issues and hum can be a problem at live gigs. The DI600P sports a ground lift switch to kill unwanted ground loops and hum. It also has a filter switch for optimal guitar tone and an instrument/amp switch with a 30dB input level drop. The Behringer Ultra-DI DI600P direct box is an extremely useful tool for any stage rig!
Behringer Ultra-DI DI600P Direct Box Features:
- Compact, high-performance passive direct box
- Jack input 1/4" TS in and parallel out
- Gold-plated XLR output / impedance balanced
- Super-flat frequency output for uncolored sound
- Switchable filter that optimizes the DI for guitars
- Instrument/Amp switch lowers the input level 30dB for feeding amplifiers into the DI
- Instruments or amplifier outputs with up to 3,000 watts can be connected directly
- Offers impedance and signal matching of instruments to mixers
- Perfect for stage and studio use
- Ground lift switch eliminates typical ground loop problems
- Rugged metal case can take the rigors of the road
Get your signal to the board with Behringer's Ultra-DI DI600P direct box!
Tech Specs
- Type: Passive DI Box
- Channels: 1
- Ground Lift: Yes
- Inputs: 1 x 1/4"
- Outputs: 1 x 1/4“, 1 x XLR
- Height: 1.4"
- Width: 3.75"
- Depth: 5"
- Weight: 0.66 lbs.
- Manufacturer Part Number: DI600P
|
Παθητικό DI box με ground lift, αναστροφή φάσης, έξοδους XLR και καρφί 1/4'' (thru), pad 3 θέσεων στην είσοδο για σήματα επιπέδου instrument/line/speaker
- Premium Performance
- Rugged Design
- Stackable Chassis with Durable Rubber Foot
- Gold-plated Neutrik® XLR Connector
- Premium Chrome Toggle Switches
- Hi-Z 1/4" Input Jack
- Parallel 1/4" Thru Jack
- Transformer Isolated
- Premium Shielded Custom dbx Transformer
- Balanced XLR Lo-Z Output
- 3-Way 0/20/40 dB Pad Switch
- Flat/High-Cut Filter Switch
- Output Polarity Invert Switch
- Ground Lift Switch
- 4 Year Warranty!
dB10 Specifications INPUT SECTION
Input: 1 instrument/line/speaker level
Connector: 1/4" jack
Type: Unbalanced, RF filtered
Impedance: 150k Ohm typical
Max Input Level: +20dBu (0dB pad)
+40dBu (20dB pad)
+60dBu (40dB pad)
OUTPUT SECTION
Thru Output: 1 parallel connection from input jack
Connector: 1/4" jack
Type: Unbalanced, RF filtered
Main Output: 1 line level
Connector: XLR male jack
Type: Balanced
Impedance: 150 Ohm typical
Max Output Level: 0dBu
PERFORMANCE
Transformer: Custom dbx mu-metal-shielded
Frequency Response: 20Hz to 20kHz, +/-2.5dB
Noise: |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.