Radial Tonebone Hot British

Βασισμένο σε έναν double stack Plexi Marshall, το Hot British απευθύνεται στον κιθαρίστα ο οποίος αναζητά σε ένα πετάλι εκπληκτικά rhythm tonesσε συνδυασμό με «hot» lead tones. Το Ηotbritish συνδυάζει τις δυναμικές που προσφέρει ένας solidstate ενισχυτής κιθάρας μαζί με τη ζεστασιά ενός tube ενισχυτή.

Το μοναδικό του κύκλωμα, που περιλαμβάνει μία 12ΑΧ7 ,δίνει τη δυνατότητα  για high gain settings στα οποία η κάθε νότα ακούγεται πεντακάθαρα και ξεχωρίζει, σε αντίθεση με τα περισσότερα πετάλια παραμόρφωσης που όταν υπεροδηγηθούν μειώνονυ το clarity στο παίξιμο μας.

Τα tone controls που βρίσκονται στο επάνω μέρος του, δίνουν τη δυνατότητα για extreme tweaking ώστε να κάνουμε την κιθάρα μας να ακουστεί σαν τους Deep Purple ή ακόμη και σαν τους Metallica.

Χαρακτηριστικά:

• High gain Plexi σε ένα μόνο πετάλι

• 12Χ7 tube για ζεστό φυσικό ήχο

• Tone controls που δίνουν δυνατότητα extreme tweaking

• Οι νότες διατηρούν τη σαφήνεια τους,ακόμη και σε high gain settings.

Tame your tone with the new Snake Charmer Compressor. The result? Silky smooth, mesmerizing tone that behaves as it should. The Snake Charmerʼs compression affects the ratio and threshold of the signal, smoothing out peaks and spikes. At the same time, the Snake Charmer also increases the Gain level to complement the corresponding ratio and threshold settings so that the overall gain remains constant.

Thereʼs also a Gain Reduction Indicator that gives you visual cues of the results of your settings. And a High/Low Switch lets you choose between two overall levels of ratio. The Snake Charmer is equipped with other controls for Attack, which determines how quickly the gain reduction kicks in, and Release, which determines how long the gain is attenuated. Finally, the High-End Emphasis control fine-tunes the amount of compression applied to the top end of the guitar signal.

• Snake Charmer Compressor CT05
• Connection: Input: x1 (guitar input), Output: x1 (line output)
• Input / Output Impedance: 830 k-ohm / 4 k-ohm
• Tube: 12AU7 (ECC82)
• Power Supply: Four AA alkaline batteries or DC9V AC adapter
• Battery Life: Approx. 18 hours
• Current Consumption: 95 mA
• Dimensions: 168.5 (W) x 155.5 (D) x 64.0 (H) mm / 6.63” (W) x 6.12” (D) x 2.52” (H)
• Weight: 1,007 g (excluding batteries / 1,102 g including batteries)
• Included Items: Four AA alkaline batteries

The CEB-3 Bass Chorus pedal offers a split-frequency chorus effect capable of applying warm, rich chorusing to the higher frequencies without muddying up the lows. It's the perfect chorus pedal for bassists.

• Compact chorus pedal especially designed for bass guitar
• Applies chorus sound to the high frequencies without altering low frequencies
• Effect Level, Low Filter, Rate and Depth knobs permit precise tonal shaping
• BOSS 5-year warranty

Vintage BOSS phasing effects including 4-, 8-, 10-, and 12-stage phasers, plus new "Rise" and "Fall" effects for unidirectional phasing. Tap tempo sync or realtime control of rate via an Expression/Pedal input.

Πετάλι harmonizer για κιθάρα με δυνατότητα intelligent-fixed cromatic-detune voicing pitch shifting, 3 μέρη αρμονίας, 4 προεπιλογές μνήμης, σύνδεση sidechain, pre-harmony Distortion loop και ενσωματωμένο tuner.

• Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
• 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
• Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
• Edit, store and recall 4 memory presets.
• Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
• Built-in guitar tuner
• Pre-harmony Distortion loop

• Features
• Shifting Modes
• Configurations
• Specifications

• Cutting–edge pitch detection engine designed specifically for guitar delivers fast accurate shifting!
• 3–part guitar harmony; Forget about music theory and programming. Just play–itʼs that simple!
• Intelligent harmony voicings, fixed chromatic voicings, and detune voice settings.
• Edit, store and recall 4 memory presets.
• Sidechain connection lets you solo while your rhythm guitarist provides the recognition source.
• Built-in guitar tuner
• Pre-harmony Distortion loop

Create musically correct harmonies based around your favorite chordal structure whether soloing a riff in a specific key or using the sidechain input for chord recognition.

Creates musically correct harmonies with various shifting depending on the harmony key.

Applies fixed harmony intervals to all notes with the fixed number of semitones selected.

Get a thick overall sound applying a small fixed amount of pitch shifting to the lead guitar voice ranging from 5 cents to 30 cents in both up and down directions simultaneously.

Unit Dimensions: 9.75" x 7.9" x 3.4“
Unit Weight: 4 lbs./1.82 kg.
Power Supply: 9VAC 1300mA PS0913B-120 Included
Inputs: 1/4" Unbalanced
Outputs: 1/4" Unbalanced
Sidechain: Ground Lift Switch

The Marshall EH-1 ECHOHEAD Guitar Effect Pedal, Echo/Delay. Add dense rhythmic textures to your sound.

The Marshall EH-1 ECHOHEAD recreates six different delay effects for you to explore, from crystal-clear echoes to hypnotic reverse delays via the vintage whir of a retro tape machine. Create pulsing tones from your guitar rig and add dense rhythmic textures to your sound. The EH-1 Echohead features a maximum delay time of 2000ms, stereo outputs and a tap tempo delay imput. The EH1 Echohead dual outputs offer the choice of using a passive bypass for the main signal path to ensure complete tonal integrity or to allow your pedal to spill over, permitting your echo to naturally die away.

The main features of the Marshall EH-1 ECHOHEAD include:

• 6 different, high quality delay effects for you to explore
• Multi-mode selector switch
• Delay time control
• Feedback control
• Level control
• Solid metal casing
• Passive bypass
• Tap tempo pedal input
• Power: 9V DC Centre Negative Regulated PSU or PP3 battery
• Minimum Current Draw: 80mA
• Switches: On/Off Switch
• Indicators: On/Off LED
• Jacks: 2 Input, 2 Output 'Jack sockets' (1/4 inch)
• Input Impedance: 1MOhm
• Output Load Impedance: less than 1kOhm
• Dimensions: 120mm x 65mm x 55mm
• Weight: 510 grammes