RCF IPS 3700 2 X 1500 W CLASS H Επαγγελματικός Ενισχυτής ισχύος

IPS Series is a range of two-way professional amplifiers that combines high quality performance and reliability with the latest power amplifications technologies.
This high value power-to-cost designs offer, in compact lightweight 2 rack unit space, the sound quality and the durability of traditional class AB and class H designs with the innovation of the latest power devices available.
IPS 3700 is a 2 channel power amplifier that delivers up to 2 x 1500 W RMS @ 4 Ω (3000 W RMS bridged @ 8 Ω), weighing just 19.5 kg.
It features independent gain dials, signal – clip and fault LEDs, stereo XLR input and Output link, 1.4 V to 0.775 V input sensitivity switch, mono – stereo – bridge switch, powercon outputs.
Moreover, it is protected against shorts and open circuits.
Thanks to its high efficiency heat sinks and high speed DC fans, the IPS 3700 can withstand the hardest heat conditions ensuring great reliability.

• • Small and medium sized PA systems
• • Club sound
• • DJs
• • Performance and sport venues
• • Worship systems
• • Public spaces
• • Cinema

Γενικά Χαρακτηριστικά

2 unit 19" rack, easy transportation
Fast response and low distortion
Easy to configure in stereo / mono / bridge modes
Extensive protective circuits ensure high reliability and operating safety.
Front panel signal / clip / protect LED indicators
XLR input connectors
SPEAKON NL4 output connectors
Operating voltage:115 ÷ 240 V (50 / 60 Hz) V ~ Hz
Power consumption:800 W

Είσοδος/Έξοδος

Input connector: xlr
Input sensitivity: 1.4 V (/ 32 – 26 dB) dBm/V RMS
Input impedance: 20 kΩ (balanced), 10 kΩ (unbalanced) kΩ
Output connector: Speakon

Amplifier Specifications

• Power output stereo 4Ω: 1500 W rms
• Power output stereo 8Ω: 1200 W rms
• Power output bridged 8Ω: 3000 W rms
• Frequency Response -3 dB: 20 Hz ÷ 20 kHz
• Signal/noise rate: 100 dB
• Crosstalk: -75 dB
• Damping factor: > 200
• Slew rate: 10V/μS

Διαστάσεις/Βάρος

Height: 88/3.4 mm/inch
Width: 482/18.9 mm/inch
Depth: 255/10 mm/inch
Net Weight: 16.6/36.5 kg/lbs

System Parameters

Protections: DC, internal fault, input overload, RF interference, unmatched load, output short-circuit,
Amplifier class: H
Cooling: Forced

• Reasonably priced, robust and powerfull power amplifier
• Robust and analog circuit
• LED display for each channel for signal, clip and error
• Stereo, bridge and parallel modes
• Conventional power supply
• Performance: 2 x 1200 W / 8 Ohm, 2 x 1800 W / 4 Ohm
• Inputs: Cinch, XLR
• Outputs: 2 x speakon, spring clip
• Robust 19 inch housing
• Hight: 2 hight units

Επαγγελματικός τελικός ενισχυτής για touring εφαρμογές με switching
τροφοδοτικό. Ισχύς 2x1250W RMS @4Ω, 2x2000W RMS @2Ω, bridged
(mono) 4000W @4Ω. Διαθέτει εισόδους XLR (in και link out) και κλέμα
για ελεύθερο καλώδιο, εξόδους speakon, μπόρνες και θύρα data HD‐15
(15‐pin). Προστασίες short circuit, open circuit, υπερθέρμανσης, RF,
on/off muting, DC fault, active inrush limiting. 2U/19" rackmount.
Διαστάσεις (HxWxD) 89x483x397mm ‐ 10kg.

HPS 2500 is a 2 channel power amplifier that delivers up to 2 x 1400 W RMS @ 2 Ω (2800 W RMS bridged @ 4 Ω).

XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature.

Τελικός ενισχυτής 2x1200@4Ω, Class-D, οnboard crossover, delay, limiter, sampling frequency rate 48 kHz

Τελικός ενισχυτής ισχύος 2 x 1200 / 4Ω και 2 x 1000W / 8Ω, ανασχεδιασμένος ενισχυτής Class-D με custom LSI, ενσωματωμένο παραμετρικό equalizer, crossover, filter, delay και limiter, έτοιμα presets για ηχεία της Yamaha, ποσοστό συχνότητας δειγματοληψίας 48 kHz, A/D D/A μετατροπείς AD/DA: 24-bit linear, 128 times over sampling, Συνολική αρμονική παραμόρφωση 0.1% (1kHz, 10W), 0.3% (1kHz, Half power), απόκριση συχνότητας ±1.0dB (1W, 8Ω, 20Hz to 20kHz), S/N ratio 100dB (A-weighted, 8Ω, Gain setting = +14dBu), Crosstalk : Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt), εσωτερική αντίσταση : 20kΩ (Balance), 10kΩ (Unbalance), I/O connectors : Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2,  Line input : XLR-3-31 x2, 1/4 "PHONE(TRS) x2, Latency : 1.5ms, Ψύξη  Διαστάσεις : 48 x 8.8 x 38.8, Βάρος 7,4 κιλά.

The power amp H2500 is part of Dynacordʼs new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with "floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms. Datasheets / ManualsManual (5.50MB)

Load Impedance 2 O, 4 O, 8 O Maximum Midband, Output Power, 1 kHz, THD=1% 2 O - 1900 W, 4 O - 1450 W, 8 O - 850 W Rated Output Power, 20 Hz ... 20 kHz, THD 400 Slew Rate 30 V/µs Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain 109 dB Output Noise , A-weighted