Content |
Προενισχυτής μικροφώνου 8 καναλιών εξαιρετικής ποιότητας και κατασκευής. Με λειτουργία 192 kHz / 24 bit και 8 προενισχυτές μικροφώνου, προσφέρει χαμηλά επίπεδα παραμόρφωσης και ποιοτικό ήχο.
8 x Mic / Line Preamp Input (XLR/TRS Combo)
8 x Line Output (TRS balanced)
8 x AD-converter (up to 192 kHz)
2 x ADAT Output (S/MUX, up to 96 kHz)
4 x AES/EBU Output (D-sub, up to 192 kHz)
1 x AES/SPDIF Sync Input
Phase, Low Cut and Phantom power per channel
| Το PRE - 73 MKIII είναι ένα πιστό emulation του κλασικού Neve 1073 και σε απίστευτα χαμηλή τιμή. Είναι ο πρώτος μονοκάναλος προενισχυτής με full discrete ροή σήματος και με τρείς ξεχωριστούς μετασχηματιστές για την balanced είσοδο μικροφώνου, την line είσοδο και έξοδο.
Με χαρακτηριστικό ήχο που παραπέμπει απευθείας σε μερικούς απο τους καλύτερους προενισχυτές μικροφώνου ανεξαρτήτως τιμής, δεν είναι τυχαίος ο θόρυβος που έχει αναπτυχθεί διεθνώς για το μικρό αυτό θαύμα !
Χαρακτηριστικά :
Vintage Style ηλεκτρονικά. Μή ολοκληρωμένα κυκλώματα στη διαδρομή του σήματος.
Μέγιστο "Gain" στη λειτουργία MIC , είναι 80 dB, είναι αρκετό για να χειριστεί ακόμα και παθητικά Ribbon μικρόφωνα .
Στους Gain επιλογείς του προσφέρει επιλογή : 20 - 80 dB.Στο τομέα GAIN/LINE το κέρδος μειώνεται κατά 30 dB σε λειτουργία LINE.
Δυνατότητα επιλογής δύο θέσεων « Boost » υψηλής συχνότητας " AIR Boost Eq ", 3 ή 6 dB @ 30 kHz.
Επιλογή 6dB/οκτάβα σε δύο hi-pass filters γύρω στα 40 (HP1) και 170 Hz (HP2).
Πυκνωτές τανταλίου στη διαδρομή του σήματος.
Επιλογή στην αντίσταση σε λειτουργία MIC, 1200 ή 300 Ohms, θα αλλάξει τον τόνο των περισσότερων μικροφώνων.
Η αντίσταση εισόδου σε λειτουργία LINE είναι 10 kohm.
Εναλλαγή phantom και absolute phase .
Μια high-impedance εισόδo για κάθε μονάδα ήχου, ηλεκτρική κιθάρα ή μπάσο.
Ένα απλό αλλά αποτελεσματικό 4-step Led μετρητή στάθμης εξόδου .
Combo XLR / TRS υποδοχή εισόδου και ξεχωριστή έξοδο XLR και TRS για τις συνδέσεις σας .
Insert jack για την εισαγωγή EQ's και άλλων μονάδων.
Επιλέξιμη 600 Ohm "output termination”.
Πλακέτα έτοιμη για τοποθέτηση του μετασχηματιστή εισόδου Carnhill.
Εξωτερικό τροφοδοτικό για την αποφυγή της αλληλεπίδρασης με τα κυκλώματα ήχου και μετασχηματιστές.
Μια εξαιρετική ποιότητα κατασκευής που θα διαρκέσει πολλά χρόνια χρήσης.
Η ΜΚΙΙΙ έκδοση έχει τα εξής νέα χαρακτηριστικά σε σύγκριση με το ΜΚΙΙ:
Πυκνωτές Τανταλίου .
Δυνατότητα επιλογής δύο θέσεων « Boost » υψηλής συχνότητας " AIR Boost Eq ", 3 ή 6 dB @ 30 kHz.
Carnhill transformer " ready " πλακέτα .
Αναθεωρημένη και λιγότερο περίπλοκη GAIN ρύθμιση με ξεχωριστό διακόπτη για όλες τις ρυθμίσεις GAIN MIC / LINE selection.
Όλα τα Gain ρυθμιστικά μπορούν να χρησιμοποιηθούν και σε λειτουργία LINE
|
Πρόκειται για έναν προενισχυτή λυχνίας, μικρόφωνου- instrument με υποδοχέα XLR και jack 1/4, που αποδίδει εξαιρετικής ποιότητας ενισχυμένο ήχο χωρίς παραμορφώσεις.
Διαθέτει 48 V τροφοδοσία και αναστροφή φάσης και εισόδους / εξόδους balanced XLR και unbalanced Jack 1/4. Εξαιτίας των διαφορετικών εισόδων, μικρόφωνου και instrument προσφέρει μοναδικά ηχητικά αποτελέσματα σε όργανα όπως κιθάρες ή μπάσα λειτουργώντας σαν DI συσκευή.
XMAX™ Class A προενίσχυση
12AX7 σύστημα λυχνίας
Input Gain control
48V phantom power
80 Hz high-pass filter
-20 dB pad
Instrument input select
Polarity-reverse switch
Backlit VU meter
Clip LED
Είσοδοι/Έξοδοι
1 unbalanced ¼” instrument input
1 balanced XLR mic input
1 unbalanced ¼” line output
1 balanced XLR line output
Διαστάσεις
Compact 1/3U rack-mount chassis
External 12 VDC, 1A power supply
|
Features Superlative sound Studio quality mic preamp Total control - Input Gain, EQ contour, Output Gain, Overload indicator Multiple output connectors XLR/jack combo input Switchable 48 V DC Phantom Power for condenser Mics Compact, computer friendly package Needs no external power supply ARX is proud to introduce the e-pre - the ultimate microphone pre-amp for hard disk recording, designed by audio professionals, not computer engineers. The all-new e-pre is so much a part of your system that it fits right into a spare 5?" slot in your computer case! It's the perfect tool for all your day-to-day recording requirements. No equipment racks to plug in, no masses of cabling to connect - the e-pre is ready and waiting when you need it. The e-pre is a studio quality microphone pre-amp using the same internal components as high end mixing consoles, built into a compact, computer friendly package. It has controls for: Input Gain - fully variable from 10dB through to 60dB to suit all types of microphones, plus switchable 48 V Phantom Power to enable condenser microphones to deliver their best. A Contour control for EQ sweetening, providing fast, easy access to a whole range of useful EQ curves Output level control - fully variable to match the e-pre's output to the input of the sound card. From -10dB consumer cards through to +4dB for professional sound cards, the e-pre can handle it. Multiple output connectors match up with any kind of sound card, including mini jacks, standard jack, RCA (phono) plugs, and even a connector to link to the internal CD ROM audio input of your sound card (if fitted). We've even fitted a 12 VDC input connector on the rear to enable the e-pre to run from an external power supply if required (eg for use with notebook computers or stand-alone use).
Any way you look at it, the e-pre by ARX is the total professional microphone pre-amp for all your hard disk recording needs
e-pre Benefits Professional Balanced XLR mic input True 48v phantom power Runs into the Line input of ANY sound card - uses the card you've already paid for High headroom = clean recordings Smart EQ Compatible with non-computer audio equipment Professional performance and specs in a user friendly package
T E C H N I C A L S P E C I F I C A T I O N S Input Impedance Mic 2 K Ohms Balanced; XLR type Pin 1 Audio Ground, Pin 2 +, Pin 3- Line 25 K Ohms Balanced, ?" TRS jack Tip +, Ring , Sleeve Audio Ground Phantom Power Voltage Switchable +48 V DC on XLR Pins 2 and 3 Max Input Level Mic +15 dB, Line +20 dB Input Gain 10 dB Minimum, variable to 60 dB Maximum Output Level -10 dB variable through 0 dB to +4 dB Overload Indicator Measured at all Gain points throughout the circuitry Output Noise -90 dB Unweighted, -97 dB 'A' weighted (Measured with Gain nominal 20 dB, Output level -10 dB) Frequency Response 20 - 20 KHz ± 0.25 dB Distortion 100 Hz 0.0085% 1 KHz 0.008% 10 KHz 0.0083% (Measured with Mic Gain 20 dB, Output 0 dB) Power Requirements 12 V DC from either computer supply or external supply (external power supply not included in e-pre package) Size 148mmW x 42mmH x 150mm D (5?“W x 1?H x 6“D) Weight Under 1 Kilo (2.2 lbs) |
Γενικά Χαρακτηριστικά
- 6 ανεξάρτητες εξόδους ενισχυτή ακουστικών, χαμηλού θορύβου (150 mW το κάθε κανάλι)
- 2 set από stereo εισόδους (A and B) με balanced TRS βύσματα
- Εξωτερική stereo είσοδος για κάθε κανάλι, για λειτουργία ''more me'' με trim control
- Λειτουργία Mix control μεταξύ των εισόδων A και B
- Λειτουργία Talkback με εξωτερικό XLR μικροφώνου, με control
- Stereo line έξοδος σε κάθε κανάλι
Τεχνικά Χαρακτηριστικά
- Είσοδος A: (2) ¼” TRS balanced 10 Ohms
- Είσοδος B: (2) ¼” TRS balanced 10 Ohms
- Εξωτερική Είσοδος: TRS stereo unbalanced 10 Ohms
-
Ισχύς Εξόδου του ενισχυτή ακουστικών: 150 mW RMS (60 Ohms) per channel
- Έξοδοι Audio: ¼” TRS stereo unbalanced per channel
- Master controls: Talk button, Talkback volume, Input A, Input B
- Channel controls: Headphone level, Mix A/B control, External input level, Mono, Mute
- Εξωτερικό talkback: XLR with TS external control jack
- Ισχύς: IEC 110V-240V internal switching
|
Το ΕΡΓΑΛΕΙΟ του κάθε σολίστα για προσωπική χροιά ήχου: EWI PDI-100 PARA ACOUSTIC DI Box
ΙΔΑΝΙΚΗ ΛΥΣΗ ΓΙΑ ΟΡΓΑΝΑ ΟΠΩΣ ΚΛΑΡΙΝΟ - ΑΚΚΟΡΝΤΕΟΝ - ΛΥΡΑ - ΚΙΘΑΡΑ
EWI PDI-100 PARA ACOUSTIC DI Box
This is a medium grade professional application Para Acoustic Active DI, which will work well on instruments with passive pickups or active pickups.
The construction is reasonably rugged and the components are well suited for the application yielding results that are typically acceptable for all but the most discerning artists.
The on-board tone and volume controls give the operator a lot of choices in shaping their sound prior to sending the signal to the mix console. This allows an artist to use this device in-place of or in addition to a traditional stage amp for their instrument. This is an excellent choice for IEM bands, or bands that like to keep their stage volume low.
This item is typically used to split the instrument signal going to a stage amp so a feed can be sent also to the mix board, or be used as a stand-alone instrument pre-amp. It is equipped with a ¼” jack for input, a 1/4" jack for output to a stage amp, one XLR jack for the send to the board and a TRS jack for inserting an FX device.Since this is an active D.I. box, it needs to be powered which can be done either with Phantom Power from the mix board, or with the supplied internal 9v battery. The battery is fairly easy to change by removing one screw in the bottom of the case.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.