The Servo 300 is a great choice for powering a small to medium sized PA, or an intergrated conference room audio system. The Servo 300 features large 10-segment 3-color level LED meters and independent channel volume controls. The rear panel includes 1/4-inch balanced and RCA input connectors, as well as 5-way binding post and 1/4-inch […]
The Servo 300 is a great choice for powering a small to medium sized PA, or
an intergrated conference room audio system.
The Servo 300 features large 10-segment 3-color level LED meters and independent
channel volume controls. The rear panel includes 1/4-inch balanced and RCA
input connectors, as well as 5-way binding post and 1/4-inch speaker outputs.
The Servo amp line also features a 4-stage power protection circuitry that ensures
optimal performance and protection of connected components.
FEATURES:
150 watts per side at 4 ohms
300 watts bridged mono at 8 ohms
1/4-inch and RCA input connectors
5-way binding post and 1/4-inch outputs
Dual Rack space design
10-segment, 3-color Level LED meters
4-stage power protection circuitry
Βάρος
9.07 kg
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.
Κάνετε την πρώτη αξιολόγηση για το προϊόν: “SAMSON SERVO 300 2X150W POWER AMPLIFIER” Ακύρωση απάντησης
The Servo 300 is a great choice for powering a small to medium sized PA, or
an intergrated conference room audio system.
The Servo 300 features large 10-segment 3-color level LED meters and independent
channel volume controls. The rear panel includes 1/4-inch balanced and RCA
input connectors, as well as 5-way binding post and 1/4-inch speaker outputs.
The Servo amp line also features a 4-stage power protection circuitry that ensures
optimal performance and protection of connected components.
FEATURES:
150 watts per side at 4 ohms
300 watts bridged mono at 8 ohms
1/4-inch and RCA input connectors
5-way binding post and 1/4-inch outputs
Dual Rack space design
10-segment, 3-color Level LED meters
4-stage power protection circuitry
The LD Systems DP600 Power Amplifier offers an amplifiying level of 2 x 300 W 2 Ohm
The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products.
The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs.
The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design.
The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers
Type
PA Power Amplifiers
Rated ouput power (1kHz @ 2 Ohms)
2 x 300 W
Rated ouput power (1kHz @ 4 Ohms)
2 x 400 W
Rated ouput power (1kHz @ 8 Ohms)
2 x 300 W
Rated ouput power (1kHz @ 4 Ohms, bridged)
600 W
Rated ouput power (1kHz @ 8 Ohms, bridged)
800 W
Output circuitry
Class H
Frequency response
20 - 20000 Hz
THD
< 0.1 %
Signal-to-noise ratio
105 dB
Damping factor
> 400
Crosstalk
>80 dB
Gain
35 dB
Input sensitivity
0.75 V
Protection circuits
clip limiter , DC protection , short circuit , thermal overload
level , Limit , Power , Protect (protection circuit engaged) , Signal
Loudspeaker outputs
2
Speaker output connections
Speakon compatible , Terminal posts
Cooling
highly efficient, automatic
Operating voltage
transformer
Operating voltage
230 V AC / 50-60 Hz
Weight
12,8 kg
Features
Volex mains socket
These amplifiers offer high, stable power output and a high efficiency factor on the high performance level and are therefore the ideal choice for driving a multitude of mobile and club systems. SL series power amplifiers are equipped with a comprehensive protection package and dynamic limiters.
The integrated, switchable Low-Pass Notch filter (a typical DYNACORD special feature) corrects the frequency response and optimizes the transient behaviour of loudspeakers.
Maximum Midband Output Power, THD = 1%, 1 kHz, Dual Channel 2 Ω - 650 W, 4 Ω - 450 W, 8 Ω - 270 W Maximum Single Channel Output Power, Dynamic-Headroom, IHF-A 2 Ω - 1150 W, 4 Ω - 660 W, 8 Ω - 350 W Maximum Bridged Output Power, THD = 1%, 1 kHz 4 Ω - 1300 W, 8 Ω - 900 W Input Sensitivity, rated power @ 8 Ω, 1 kHz + 2,2 dBu (1,0 Vrms) Maximum Input Level +21 dBu (8.69 Vrms) Voltage Gain, ref. 1 kHz 32.0 dB Frequency Response, ref. 1 kHz 10 Hz...40 kHz (±1 dB) Output Stage Topology Class AB Dimensions (W x H x D), mm 483 x 88.1 x 421.5 Weight 12.6 kg (27.8 lbs)
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
<br>* Input Sensitivity : 0 dBu/0.775 V, +6 dBu/1.55 V at rated output / 4 ohms ref. 1 kHz<br>* Maximum Input Level : +21 dBu / 8.7 V<br>* Input Impedance active balanced : 20 kohms<br>* THD at Rated Output : < 0.05 % MBW = 80.0 kHz, f = 1 kHz<br>* IMD -SMPTE : < 0.01 % 60 Hz, 7 kHz, at rated output<br>* Signal-to-Noise Ratio : >105 dB at rated output into 4 ohms, <br> A-weighted, RMS, input sensitivity +6 dBu<br>* Attenuation at rated output : > 70 dB f = 1 kHz<br>* Damping Factor internal 1 kHz : > 300<br>* DIM 30 : < 0.01 %<br>* DIM 100 : < 0.01 %<br>* Slew Rate internal : > 25 V / ?s<br>* Power Consumption : 300 W 1/8 rated output into 4 ohms<br>* Width : 483 mm<br>* Height : 88.1 mm<br>* Depth : 426 mm<br>* Weight : 14 kg<br> </p></td><td>
<p>BASIC Series - Intelligent Power</p>
<p>BASIC - that's meeting the tightest budgets and professional requirements <br>in reliability, flexibility and sound. Alone or in combination with the other <br>products of the Bittner portfolio.<br>The consequent realisation of the Bittner quality standards indicates once <br>more our understanding of the contracting business. It underlines our philosophy <br>that cost consciousness has nothing to do with giving up standards. Compromise <br>is a word unknown to Bittner Audio!<br>The incorporation of detent potentiometers, clip limiter, protection circuits for <br>any imaginable situation, as well as a first-class production process using only <br>highest-quality components made the BASIC series the choice of most contractors.</p>
<p>Certainly more than basic!</p>
<p>High Tech SMT design <br>Excellent sound and superior impulse response <br>Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay <br>XLR Inputs <br>Speakon and Binding Posts <br>Clip Limiter <br>Toroidal transformers <br>LED Indicators for SIGNAL, CLIP, PROTECT, POWER <br>Temperature controlled, variable speed, low noise fans <br>Detent potentiometers <br>Stereo / Bridged / Parallel Mode <br>Ground Lift <br>Robust Steel Chassis <br>3 Year Warranty </p>
<p>TECHNICAL DATA:<br>Basic 400: 2x 200 W @ 4 Ohm <br>Class: AB<br>Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)<br>THD: < 0.03%<br>Signal-to-Noise Ratio: < -102 dB<br>Channel Seperation: > 85 dB<br>Input Sensitivity: +6 dBu<br>Input Clipping: 22 dBu<br>Input Impedance: 20 kOhm<br>Damping Factor: > 400 @ 4 Ohm<br>Cooling: 2x Fan (temp. reg. variable speed)<br>Weight: 12 kg.<br>Dimensions : 2 RU/483x89x265 mm (19 "acrobat_reader_logo."){kind=logo}
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.