sE ProMic Laser Πυκνωτικό

To sE Laser, είναι ένα νέο πυκνωτικό μικρόφωνο σχεδιασμένο ειδικά για ψηφιακές μηχανές DSLR. 
 
Τοποθετείται πάνω στην κάμερα μέσω της ειδικής βάσης στήριξης και προσθέτει υψηλής ποιότητας ήχο στα βίντεο που γυρίζετε με οποιαδήποτε σύγχρονη κάμερα DSLR.  
 
Γενικά χαρακτηριστικά :

• Επαγγελματικό πυκνωτικό μικρόφωνο (electret)
• Διάγραμμα: Super cardioid (shotgun)
• Τροφοδοσία: 1 μπαταρία AAA 1.5V
• Διαθέτει διακόπτες: 10dB Pad, Bass Cut και On/Off
• Απόκριση συχνότητας: 20Hz-20kHz
• Max SPL: 120dB
• Αντίσταση: ?200ohm
• Ευαισθησία: -30dB ±2dB
• Περιλαμβάνει: Ειδική αντικραδασμική βάση, καλώδιο μικροφώνου (3.5mm jack), θήκη μεταφοράς, αφρώδες αντιανέμιο.

Audio-Technicaʼs high-SPL BP892 MicroSet® offers the ultimate in low-profile, high-performance audio. Delivering clear and accurate sound in an inconspicuous package, the ultra-lightweight BP892 hooks securely behind either ear and can be worn for hours without fatigue. For maximum stability and comfort, the included AT8464 dual-ear microphone mount converts the MicroSet to a dual-ear-worn unit.

The microphone features a flat, extended frequency response and other outstanding performance specifications, resulting in extremely intelligible, natural audio for stage and television talent, lecturers and houses of worship. Protected by a highly durable Parylene coating, the new headworn mic is built to stand up to the rigors of day-to-day use.

Handles high sound pressure levels with ease
Extremely intelligible natural audio
Inconspicuous, lightweight headset with capsule diameter of just 2.6 mm is ideal for applications requiring minimum visibility
Ergonomic under-ear design—flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses
Comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
High-pass filter on power module provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Omnidirectional
Frequency Response: 20-20,000 Hz
Low Frequency Roll-Off: 80 Hz, 18 dB/octave (wired only)
Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
Impedance: 250 ohms (wired only)
Maximum Input Sound Level: 135 dB SPL, 1 kHz at 3% T.H.D.
Dynamic Range: (Typical)    104 dB, 1 kHz at Max SPL (wired only)
Signal-To-Noise Ratio: 63 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical (wired only)
Switch: Flat, roll-off (wired only)
Current Consumption: 0.1 mA typical at 5V (wireless only)
Voltage Range: 2.5-11V (wireless only)
Weight (Microphone):    Microphone, boom & earpiece: 2.6 g (0.09 oz)
Weight (Power Module): 85 g (3.0 oz) (wired only)
Dimensions Microphone: 8.1 mm (0.32“) long, 2.6 mm (0.10“) diameter Boom: 98.4 mm (3.87“) long, 1.07 mm (0.04“) diameter
Dimensions (Power Module)@ 97.6 mm (3.84“) long, 18.9 mm (0.74“) diameter (wired only)
Output Connector: (Power Module)    Integral 3-pin XLRM-type
Cable: 1.4 m (55“) long (permanently attached to microphone), 1.6 mm (0.06“) diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
Accessories Furnished: BP892: AT8539 power module (wired only); AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case BP892-TH: AT8539 power module (wired only); AT8464-TH dual-ear microphone mount; AT8440 cable clip; two AT8157-TH windscreens; two AT8156-TH element covers; moisture guard; belt clip (wired only); carrying case
Audio-Technica Case Style: M31

Τώρα οι εικονολήπτες μπορούν να χρησιμοποιήσουν στερεοφωνική ηχογράφηση στουντιακού επιπέδου σε εξωτερικά γυρίσματα με μεγάλη ευκολία. Η Χ/Υ ρύθμισή του επιτρέπει στο Stereovideomic να ηχογραφεί το πραγματικό περιβαλλον του χώρου, κρατώντας παράλληλα σε χαμηλά επίπεδα τους background και low end θορύβους. Επίσης διαθέτει το ίδιο κυκλωμα χαμηλού θορύβου όπως και το κορυφαίο σε πωλήσεις VideoMic. To StereoVideoMic επίσης προσφέρει λειτουργία 9V με μπαταρία, ένδειξη μπαταρίας με LED, high pass φίλτρο και διακόπτη PAD -10 dB έτσι ώστε να μπορεί να χρησιμοποιηθεί με τις περισσότερες κάμερες διατηρώντας πάντα τον έλεγχο της έντασης του ήχου. Μπορείτε να το χρησιμοποιήσετε και σε stand ή σε καλάμι boom.    

Audio-Technica's AT875R is designed for video production and broadcast (ENG/EFP) audio acquisition. Audio-Technica's shortest shotgun microphone, it mounts conveniently on a DV camcorder without adding noticeable heft, and is ideal for use with compact digital cameras. This high-performance microphone offers a narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.

Designed for video production and broadcast (ENG/EFP) audio acquisition
Extremely short length (under 7“) ideal for use with compact digital cameras
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Tailored response minimizes camera and handling noise
Operates on phantom power only
RoHS compliant free from all substances specified in the EU directive on hazardous substances

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 90-20,000 Hz
Open Circuit Sensitivity: 30 dB (31.6 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 127 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 107 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 74 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Weight: 80 g (2.8 oz)
Dimensions: 175.0 mm (6.89“) long, 21.0 mm (0.83“) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; windscreen; soft protective pouch

Το AT897 της Audio-Technica σχεδιάζεται για λήψη ήχου σε εξωτερικό χώρο σε εφαρμογές κινηματογράφου/τηλεόρασης/
βίντεο, επαγγελματικής ηχογράφησης και ραδιοφωνικών εκπομπών.
Τοποθετείται με βολικό τρόπο σε βιντεοκάμερες DV χωρίς να προσθέτει αισθητό βάρος και παραμένει εκτός καρέ λήψης
ακόμα και στις πιο μικρού μεγέθους ψηφιακές κάμερες. Αυτό το κοντό μικρόφωνο shotgun που τροφοδοτείται από μπαταρία
ή τάση phantom προσφέρει εξέχουσα λήψη ήχου σε μακρινές αποστάσεις χάρη στη στενή γωνία υποδοχής της γραμμικής &
μεταβαλλόμενης σχεδίασης. Παρουσιάζει επίσης ομαλό, φυσικό ήχο στη βάση και άριστη απόρριψη ήχων εκτός βάσης, οι οποίοι
φτάνουν από τις πλευρές και το πίσω μέρος του μικροφώνου.
• Εξέχουσα λήψη ήχου από μακρινές αποστάσεις χάρη στη μικρή γωνία υποδοχής της γραμμικής & μεταβαλλόμενης σχεδίασης
• Ομαλός, φυσικός ήχος στη βάση
• Άριστη απόρριψη ήχων εκτός βάσης, οι οποίοι φτάνουν από τις πλευρές και το πίσω μέρος του μικροφώνου
• Δύο ευέλικτες επιλογές τροφοδοσίας: phantom και εσωτερικές μπαταρίες μεγέθους AA
• Επιλεγόμενο roll-off χαμηλών συχνοτήτων για βελτιωμένη λήψη διαλόγων και περιορισμένη περισυλλογή ήχων.
• Ελαφριά, στιβαρή κατασκευή που προσθέτει αμελητέο βάρος στις βιντεοκάμερες

Audio-Technica's AT897 is designed for field audio acquisition in film/TV/video production, professional recording, wildlife recording and broadcast applications. It mounts conveniently on a DV camcorder without adding noticeable heft, and remains out of the frame even with compact digital cameras. This high-performance short shotgun offers outstanding long-distance audio pickup due to narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic.

Designed for video production and broadcast (ENG/EFP) audio acquisition
Short length (11“) ensures mic stays out of the shot -- even when used with compact digital cameras
Smooth, natural-sounding on-axis audio quality
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power
RoHS compliant - free from all substances specified in the EU directive on hazardous substances

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -40 dB (10.0 mV) re 1V at 1 Pa Battery: -41 dB (8.9 mV) re 1V at 1 Pa
Impedance: Phantom: 200 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 129 dB SPL, 1 kHz at 1% T.H.D. Battery: 115 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 112 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off (recessed)
Weight: 5.1 oz (145 g)
Dimensions: 10.98" (279.0 mm) long, 0.83" (21.0 mm) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; AT8134 windscreen; battery; 5/8“-27 to 3/8“-16 threaded adapter; protective carrying case

The length (14.53“) of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording and other specialized uses. The microphone is designed for video production and broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides and rear of mic and switchable low-frequency roll-off. It operates on battery or phantom power.

Designed for video production and broadcast (ENG/EFP) audio acquisition
Length is well-suited for ENG, outdoor recording and other specialized uses
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power
RoHS compliant - free from all substances specified in the EU directive on hazardous substances


Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 40-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: 39 dB (11.2 mV) re 1V at 1 Pa
Impedance: Phantom: 250 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off
Weight: 170 g (6.0 oz)
Dimensions: 369.0 mm (14.53“) long, 21.0 mm (0.83“) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8132 windscreen; battery; protective carrying case